RC10Talk - The Net's Largest Vintage R/C Community

My kit (pictured) is the one off ebay from hawaii,

look in the scans archive on this site, there is a copy of the MIP 410 legends kit instructions there, the white piece on the servo is the MIP belt tensioner, there should be a small mount with idler bearing mounted to the rear bulkhead on the trany side as well, the piece on your front shock tower ...

I was watching that car for a couple days and mised the auctions end by like two minutes, looks nice good score good luck with it

I just picked up an RC-10 with the MIP legend kit installed, I have dissasembled it and was wondering if anyone here has any experience removing the front and rear belt pulleys, I am pretty sure they press fit onto a tapper on the respective shaft of front and rear gearboxes like a kyosho type axle,...

Here are some pics of the axle with shims and without

to answer your question I believe the dimension is 52mm pin to pin, the axle part #is Hot Bodies #61139

Sure I can do it tonight

I looked into the tamiya part before I went with the junfac it will work if you use the tamiya axle ( it reaches through the extender) with the stock scorpion dogbone, the junfac part gives you more flexibility because of the long reach nut, thats what allows the use of the cvd axle I used it makes ...

the part # is hot bodies 61139 $12.18 on the bay I bought like five sets the seller is rcboyz there is one set on there now, you can also use HPI 80838 but they are to exspensive for me I like cheap stuff

check out this link http://www.rpphobby.com/product_p/jun51032.htmk I bought them here $27.99 they come in a set of four enough for two cars, Im gonna use my extra set for a runner Assault Im working on

I am new to the site and thought I would share something I recently figured out, I was looking to find an alternate axle and dogbone set up for a runner scorpion I am building from extra parts, I did some measuring and research looking at every touring car manual I could find on line and came up wit...

Al I got the car and it looked like helen keller and ray charles built it, I took it apart and the 4wd system is in great shape it did not get much use if any at all, what I need to know is how to remove the belt pulleys without damaging them, in the instructions it sugests using needle nose pliers ...

Thanks, I realy appreciate it, now I can take the car apart with out breaking something, I noticed some cars that I have seen on the site have the standard pulleys front and rear and some have a rear slipper pulley, mine does not have the rear slipper was the slipper a later addition or option? than...

hello, Im a new member and was wondering if you could send me a copy of the instructions for the 410 legend the scans are not on the sight anymore, I recently purchased a used rc10 with the legend kit installed on it , I would like to restore the car and install a new chassis and rear bulkhead any h...

thanks for the help but thats the older version sp1, I need the legend instructions there is a link in the scans archive but it does not work