RC10Talk - The Net's Largest Vintage R/C Community

Today is an anniversary for me. Today makes 11 years since I finally put down the cigarettes and became a 100% smoke free person. One of the best choices I ever made for my health 8) Wasn't easy to do for sure. I was a pack of menthol per day smoker and tried every way out there to try to quite. Tri...

I'm throwing this together at the request of another member. This is just some of the stuff that I do, so take it for what it is. If someone has any ideas to add, please do so. I rummaged through my stuff and found this crusty Peak Racing 12X2. It looks like a good candidate. Screenshot_20220416-133...

Not sure how much success you'll have trying to drill the 1/4" axle taper. Getting off center could make for a really wobbly wheel. Your rear wheel options probably are: 1. Get 3/16" rear stub axles and flanged bearings. Axles aren't readily available. 2. Get Custom Works Short CVD kit an...

Nostalgic RC

The T4 would be easiest. Put some street tires on, limiters in the shocks, and stiffer springs. This is another option. Screenshot_20220419-132939_Gallery.jpg It is a short arm car with hex conversion. It uses wide offset RPM crawler wheels and rear sized tires all around. It is lowered, has very li...

New shoes

The b4 axles will work they will be slightly wider and need to use blue spacer. About 2mm.

All the hubs shown except the b4 hubs will work. B4 hubs pushes out approx 3/8".

The bones are short. Maybe like 30-35mm?

JC racing is working on Dual Sport universals as well as buggy and truck universals. Old school style, not the modern CV

Does the width of the platform matter, the t4 would be very wide? Wouldn't the ride height be high even when lowered, or is there a way to lower the center of gravity? Here's my on road T4 for example. Width is 11.5" compared to the original T4 13" width. The chassis has 3/4" ground ...

Since I was switching out the outdrives in my RC10T4 FT from the regular units to the lightweight outdrives, I decided to weigh the three different AE outdrive options that were for the various versions of the B4, T4, SC10 and GT2. Associated part numbers: - 1766 FT Lightweight Outdrive Set (uses 3/...

I believe the rc10 and 10t universals are coming first, they were asking me to double check measurements just last week on the DS uni’s. Hard to say for sure but maybe shoot them an email (I talk to them mainly on Facebook messenger).

https://www.jcracingproducts.co.uk/vintage-car-spares

The car came the other day and it's actually pretty cool. It is basically a buggy with an oversized car body, sort of like a modern day version of the DS. I scored a good deal on this one without electronics, it's a shame that the car isn't offered as a kit. Should be fun..... 20220421_212531.jpg 20...

I tried getting a little creative.

I finished my Losi mini B pro roller today. I used the Hobbywing 18A ESC, 7800KV 2030 motor, CHNL 650 70c 2s battery, and Radiolink R4FGM receiver (buried under the wire burrito), and Emax es08md ii servo. The servo does not work with the supplied AL servo horn. Additionally, the supplied servo moun...