RC10Talk - The Net's Largest Vintage R/C Community

So I got the B4 CVA axle in the mail today, and when compared with the Custom Works Medium Lenght CVD, it’s the same lenght, the problem is, with the b4 hub and Klein arms, it’s too short, and with GT hubs and Klein arms, it’s a tad too long, For it to work properly, I used a 2.5 mm of shimming or s...

Biz73 wrote: ↑Mon Jun 08, 2020 12:18 pm Looking good. What are the tires on the front?

Traxxas Rad2 2.15” tires

Pretty much done

What a Beauty of a car....I need one

The 2020 VONATS were a blast, and after a 9 year racing hiatus, I did ok in both of my classes. I decided to add a 3rd class, and the main inspiration behind it was the Ten4 buggy. My version is going to be based on the “Old Is New” style buggy, using the Klein Arms, and 10T shock towers and shocks....

Awesome work

Not a fan of the FF concept itself, but I’m looking forward to seeing how this turns out

So this will be the final resting place for the GT gearbox, everything from here on out will have to work around this. It’s tied to the nose plate using a par of Traxxas servo mounts that will either be replaced for something a bit stronger or just dyed black😁 I made a carbon brace to tie the top of...

Sabula Tech Jammin Body and B6.2 Wing

That’s an awesome build, nice and super clean

I borrowed these from Jason D. on the RC10Talk Facebook page

tecnica2001, How did you convert your B3 to 12mm hex with the front and rear? Did you buy your diff and outer drivers off Ebay or do you know of drop-in replacements? Thanks! I used the custom works front hex conversion and just used rear hex adapters. The diff and outdrives are the B3 originals

Ewww,

That’s disgustingly Awesome…..

Beautiful work