RC10Talk - The Net's Largest Vintage R/C Community

Got the chassis protector, and decals put on. This thing is pretty sweet.

I don't think I can do that, technically all these parts would be owned by Losi and I don't want to risk lawsuits. You could take the stl file to a third party service and get them printed if you want or I could print you copies. I think cults even directly links you to services that will print. I a...

Cults is linked to a service that will print your 3d files for you. It connects to many printshops around the world with options in material and surface finish among others. That and if you really only wanted to use Shapeways there is nothing preventing you from taking the stl over there manually. H...

This is what I have come up with so far, I am doing some test prints to make sure everything is where it should be. It is not 100% accurate but it allows the outdrives to push through the case without universal joint disassembly. This should allow it to work with whatever they come up with in the fu...

Just thought I would park this here heh.

WriteDean wrote: ↑Tue Jul 26, 2022 11:57 am I made this Jurassic Park video a few years back -


https://www.youtube.com/watch?v=IST6KjL-dqE

I love those T rex inflatable outfits, they always crack me up when I see people doing vids with those

Finished the Dr Alan Grant for the Jurassic Park diorama now. I bought an action figure then glued all the joints into position, filled the joints/seams with bondo, sanded and painted him. Then for the flare I wired a tiny LED chip light with the wires drilled and running through his body to hide th...

Well that doesn't look like a Losi part... Hmm.

So I couldent resist. I bought the red one, Figured as it's my first ever Losi!.. I have a few mods in mind. Swapping the wheel nuts for white nylone. Thinking of painting the receiver/esc case orange. Try to source mini-T 1.0 springs. I've ordered JRX2 decals and panel decals in 1/16 scale from MCI...

I dont know if I will follow through on this or if it is just a 3d modeling exercise, but I have been modeling RC10 parts and trying to translate them to 1/16 scale. I do not have any front arms anymore apparently so I had to find some parts on yeggi (the grey ones). In the picture is the model next...

We will just have to see how it goes. I have pondered making some bucks and trying to squish a chassis with my hydraulic press. I fiddled around with the chassis I downloaded, it looks nice, but I still want a real og chassis in hand to get the model right, you will also notice the battery box is ta...

Have the other printer out of the closet grinding away again making more prototypes...

the tiny battery box is precious

MarkyDents wrote: ↑Tue Aug 09, 2022 10:11 pm Seeing all these parts scaled down like this is too cool !

You think photos are cool? You should see them in person! I can't help thinking how cool each piece is as it comes off the printer

That was the first thing I tried but it literally doesn't fit in any way that the trans would look even close to original. I even pulled apart my mini t 1.0 and it's diff is even bigger. I measured the stealth and that diff is far too big for that as well.. I need to find a 1/18 diff that is smaller...

How bout the 1/16 traxxas vehicles center trans internals ?
They are still current so parts availability wouldn’t be an issue.