RC10Talk - The Net's Largest Vintage R/C Community

TQ10, built from a bare chassis. Instead of an original, I went with a (somewhat) racer. - Andy's arms, Hogue bellcranks, A&L/ Factory Works towers (tall front for 0.71 shocks and Andy's arms) and transmission brace, and Pure-Tech strap. - TBG body and MCI decals, in semi-box art. - JC Racing wh...

Dinglem scared everyone away. Right now he is probably just waiting for the Loctite to dry on an AYK prototype raced by Jesus in the Olympics. This is my original Top Cat I bought new and re-acquired recently. I present it not as a "great build", but as a great experience- i.e. finding and...

My latest JRXT build with a Ricky Bobby tribute body. https://www.rc10talk.com/viewtopic.php?f=27&t=48318 Mostly stock except for.. - 1pc wheels - Losi titanium ball studs - Tecnacraft titanium tie rods - RPM rod ends and gear cover https://i.postimg.cc/C1GCRfr1/B34-AAF26-16-FF-40-BD-84-BD-6410-...

A little update, The Cat XL is race ready as i stood in 87-89, reciever however upgradet to 2.4. MMS transmission, tuffnol Spurgear, Novak T1 esc, Ko Propo 87 world championship edition and the pink Trinity, mms ball bearing steering, the orange front belt and brown short belts (can´t remember who m...

This is my vintage 1980s Yokomo Super Dog Fighter buggy unveiled in 2023. This build is 90% complete with period-correct batteries and electronics. I prefer the look of a lay-down receiver configuration. This allows just enough space for a low-profile servo to fit perfectly in the tight space. Defin...

Here’s my woin xls runner.


Build thread with more pics can been seen here

https://www.rc10talk.com/viewtopic.php?t=47808

Early RC10

Old build thread https://www.rc10talk.com/viewtopic.php?t=25230&hilit=early+RC10+resto

IMG_2961.jpeg This is my 2016 Chris Van Air rc10t reproduction. This is based off the rc10t that won a nonvintage race in 2016 at Hot Rod Hobbies. Chris was kind enough to help me nail all the details and Jeremy from ‘off the grid ‘ rc paint made me an exact copy of the design he did for Chris. Her...

The CC RPM Worlds was based on the '91 Worlds Stealth buggy that AE developed for the loamy Freedom Hill Park track in Detroit that was hosting the 1991 IFMAR Off-Road Worlds. RPM developed the '91 Worlds front end kit for AE team drivers that weren't running a Stealth buggy. It took roughly 18 mont...

An absolute thing of beauty….could you slow down on your builds, I’m starting to feel like a slacker over here (my RC10GX has a layer of dust on it that is making me feel bad). :lol: :lol: There is a time for everything... Shocks on, Wheels will go on soon and then the electronics. Need to figure o...

A while back I found a cool thread www.rc10talk.com/viewtopic.php?t=239 started by Scr8p that linked to a timeline Novak had on their website. With Novak updates ending the timeline in 2009, their eventual closure, and wayback links as the only active workaround I thought brining the timeline onsite...

Composite Craft RPM '91 Worlds
Not a replica - all vintage parts that were readily available starting in the early 90's up to around '94

Build thread: https://www.rc10talk.com/viewtopic.php?t=48572

I'm in for one more beating this year. My Detroit '91 Worlds replica buggy: . PXL_20231104_161015968~2.jpg . PXL_20231106_141727260~2.jpg . https://www.rc10talk.com/viewtopic.php?t=48579 A little teaser running on street tires and a used vintage Sanyo SCR 6 cell NiCd pack (which awesomely still take...

My "Precious" controlled RC10GX with Italian Mecha sponsorship. Just a few hardware details to enhance the colors of a classic. Upgraded bolts and screws, springs, graphite brace, and a white paint scheme that flowing to the font bumper. Yokomo engraved black dish plates from Pargu, and 90...

My 1986 Kyosho Rocky.

Totally torn down and cleaned/restored.
New body, paint and decals.
Trinity Speedworks - 427, 15 turn for 4wd.
Everything on the car is original other than the motor, speed control resistors and the new body.




Chuck