RC10Talk - The Net's Largest Vintage R/C Community

TheDiamondOne wrote: ↑Sun Apr 11, 2021 5:35 pm 240 ST ONLY!

The Brushless 240S looks pretty good in there. Just have to find a good way to route the ESC wires.

Just a quick update: I had set this project aside because I ran into an issue where I couldn't set my differential or slipper right. Seemed no matter what I did either one slipped excessively or it was locked up. I chalked it up to the losi 13.5 Brushless motor being too hot and me needing to figure...

scoobyrs25 wrote: ↑Thu Jul 14, 2022 2:00 am This is what I was talking about. LWD version coming soon...

https://exorcdesign.com/

Affordable CV's that'll fit early Lazers, maybe?

https://exorcdesign.com/products/cva-set-for-kyosho-optima-mid-2-pcs

I started messing around with trying to implement the 5-4 rear camber link setup. Mentioned before, the challenge is the #5 hole location in the bulkhead is normally occupied by a 4-40 screw that vertically ties the chassis to the bulkhead. I first went looking for a long enough 4.8mmxM3 ball stud t...

While I was taking it apart I noticed something odd. LXT apparently changed the front shock tower design for the camber links at some point during the LXT/GTX/NXT production run. Same part number but different holes. https://i.postimg.cc/jWMQgYCK/IMG-20221105-145740670.jpg I wonder if it correspond...

So, I wasn't really happy with how the XXX-SCT Buggy rod ends fit into things, particularly with it interfering with the slipper cover and the added mix of parts, so I took a chance on the TLR 22 ball studs with the 14mm long thread. I got lucky and it was JUST long enough to fit through the bulk he...

Well, if I just would have looked a little further down the Losi forum than my own posts, I would have found BattleTrak's post about the steering enhancement kit and the camber hole comparison! - https://www.rc10talk.com/viewtopic.php?f=27&p=542022#p542022

Breaking News- Check Out the 2 page ad on the Feb 2023 RC Car Action issue - Losi Mini JRXT limited edition!!! Unfortunately the QR link is not showing the vehicle yet. -limestang Reddit claims this is a photochop. Do you have this ad in hand? https://www.reddit.com/r/losi/comments/10bxwpq/team_los...

Nice! I put one in my LXT back when I still raced it. And I think I have a backup kit I got years later.

I'm trying to planta bug in Losi's ear about releasing a mini of the 1991 Worlds/Nationals prototype car on a couple of their social media. I'll probably have to break out a my CAD and eyeball one myself, though. Good Luck with that!! Haha.. I finally put in my pre-order for the Mini JRXT and notic...

Wow! This "pre-order" went quickly!

Just a bunch of big kids playing in the mud with their toys.

The JRXT continues to be a fun car to race in stock form and the class for it at RCM is pretty well packed, there is a lot of chaos in it though. and the front turnbuckles popping off is definitely a common issue among the field. In typical me fashion I TQ'd only to completely botch the Main again....

I'm S L O W L Y making progress towards my Mini XX Worlds Prototype based on CLM's Pro SE/LXT chassis work and Mini B Wheels.

Too much going on in my life to really focus on it, though.

It's been a while! And I started another project so, of course, I got motivated to work on this project, again. I started working on it again after finding replacements for the 4mm JIS top plate screws while browsing the optima Rerelease exploded views. So I got things temporarily hooked up on the p...