Anyone here into tractor pulling? I have been anxious to get into some sort of local RC competition, but 1:8 buggy racing is out of my skill set, and everything else is just too far away to justify getting into. But, through a FBMP deal this...
Last post
I officially attended my first RC pulling event today! But it was short lived as the group was a bit behind on actually getting started, and I had chores to do so couldn't hang out for very long. The group was experimenting with a new laser...
A lot of you must already know this, but I recently found a site that has the original Vette from the movie, and it says the Vette was most likely an RC10 DS, and was driven by Jammin' Jay Halsey!
TzUtXMNizVo
I was 15 or so when this movie...
Last post
Found a vintage NOS set of asc6192 knockoffs, not in chrome, but from the original smooth mold; $20 shipped was the right price for making the attempt to chrome them with pens or spray.
We all buy from all over the world more so within the vintage community.
I'm waiting on few things still but what did you get in the post today.? :D
Last post
Found a pair of CVA axles and an early B4/T4 gear cover at reasonable prices. Recent TBG order for a Kyosho Pro-XRT and Losi MF1 XXX-T bodies. The alcohol pads I specifically got for decal prep.
I have two things in the mail, that will take a while to get here. The first is a decal sheet with custom colors from MCI, for a Corvette project I'm working on.
The second, I looked every day for a set of these, for months, placed WTB ads, they...
Last post
Thats what I took the thread for. Perhaps simply What are you currently waiting for would a better subject title??
As hard as you've been searching for the Fuchs I can understand your excitement. Congrats by the way !
So while polishing up one of my chassis I managed to over polish a have grey spots on a black chassis.
The anodize is still present so I don't think aluminum black would work. Has anyone come up with a way to darken faded dye.
I was thinking of...
Last post
It looks like Caswell may have a kit that would help.
I am not sure if this is just a degreaser, aluminum black and, a sealer.
Since the 3d10 thread has been hijacked / side-railed a bit by this topic, I thought I'd start a separate topic on the options for finding a differential for the SCX10 / Injora transmission.
These 2 threads had their take at finding a solution:...
Last post
I was about to order the Tamiya gear diff assembly (54471) and it suddenly occurred to me that the diff gear and side plate assembly is almost certainly too wide to fit the Austar/Injora case. That case is very narrow and closely hugs the gears. :(...
Know of any good Youtube RC videos? Can be informative, historical, funny, provocative, dumb, relaxing... Anything with replay value that you enjoy watching repeatedly?
I like this one... short, sweet... makes you want to go out and buy a Stadium...
Last post
The 2 channels I really like are RC Driver and Adams Playground.
So I've just completed a recreation of my old vintage hotshot and I went with the original yellow Tamiya CVA shocks for the build as that's the way it was BITD , anyway last weekend I met up with a mate and we went for a bash at a local spot , he...
Last post
Best shock that held oil the worst? Delta.
Best shock that is nearly impossible to bleed? Delta
Has anyone taken advantage of the Reedy Upgrade Exchange Program? Looking through their list, all I'm really interested in is swapping out some old (even some new) low-end servos, maybe a motor, maybe an esc. Seems like doing this would be lots...
Last post
I have thought about it but like someone said the reward is almost nothing. I would rather hold on to the parts. You never know when they will come in handy.
How do you ship to Australia or New Zealand from the US? Do you just staple the package to a wombat or something? Apparently a couple of guys, presumably both named Bruce , want my Storm 2000.
Last post
How do you ship to Australia or New Zealand from the US? Do you just staple the package to a wombat or something? Apparently a couple of guys, presumably both named Bruce , want my Storm 2000.
Admittedly I don't have a lot of unicorn eyelash type stuff. But pretty sure when you can't find the thing for sale anywhere online, you can officially call it rare.
So... what do you think is the rarest R/C part you have?
I like to think the...
Last post
Schumacher Active Caster System for Losi XX.
Was gifted to me last year by a friend who only used it a couple of times back when it came out.
Is there a way to adopt a b4 style top shaft to a 64 pitch for use with a thorp 64pitch gear set? Were the top shafts and idlers for the thorp 64pitch gt and rc10 stealth the same across kits?
-Joseph
Last post
It may be possible to press the gears off and swap them. I'm honestly not 100% sure though.
Are there any threads here on that? Would I just try and torch and hammer off the gear of a associated steel b4 top shaft? Are there any 'blank' b4 shafts?
Stop it now :!:
This is a place to post pictures of your runners after they get DIRTY :wink:
I'll get the ball rolling with my white Samurai after running on recently mown wet grass .
IMG_20221010_174611_282.jpg
IMG_20221010_174624_380.jpg...
Last post
While waiting for the eclipse, I've been in the back yard stirring the dust with my newest F150 toy.
Traction Hobby F150.JPG
I've geared it up a bit and running 4s, it's nearly as fast as my buggies :D -- although, it doesn't jump as well....
I did read somehere when Delta closed Arturo Carbonell switched to Vicfor cars. I have heard from this brand before but haven't found any informations or pictures on this brand. Someone has any knowledge?
Also are there any pictures from the bodies...
Last post
I just posted about this on a different thread. I think I might have a vicfor?
Hey guys. I am looking at a Canadian ebay auction for a very small item, but seller does not ship to US. Would anyone be willing to help out purchasing and forwarding to me? Thanks
What is weird to me is that they ship worldwide, but exclude a...
Last post
Phewwww so glad you got it! I logged in and saw it had been sold and was concerned and came here to check! Rc10talk forum for the win :) lol
In a shootout between different generations of RC10s what is their time difference?
Outfitted with similar tires and electronics, on a typical US indoor high traction clay/dirt mix track how would their times compare?
Bring on a pro and local...
Figured I'd show this off since I've not seen too many others. It came on my RC10GT (soon to be running?) And was painted a disgusting shade of neon yellow. Stripped it down with isopropyl alcohol, and I'm not really sure what to do with it now....
Last post
the buggsy and cyberbuggsy were a couple of my favorite bodys. dahms in general just had their own certain style and it was good.
So I get that many folks here have a good deal of space to devote to their collections.
Unfortunately I don't have a lot of space and it's starting to feel cramped.
Has anyone here had to reduce their collections? Was it overall better for you,...
Last post
I really need to reduce what I have as well. I came to the realization several years ago that I'm never going to finish the majority of projects I have. It's due to many factors such as a lack of time, money, desire, ambition, and health all play a...
Does anyone use any sort ot hand protection for preventing nicks and cuts when working with xacto blades? When I'm cleaning up 3D prints, trimming bodies, cutting injection molding nubs, etc I usually end up doing something with a blade that slips...
Last post
My glove size seems to vary based on who makes the gloves.
I ordered a set of the finger tip covers. They will be interesting to try.
Insert the cat walking in shoes video here :lol: .
Work just upped the cut resistance on our gloves so a...
Updating an old post: Assuming you limited your vintage collection to only your favorite 3 from any manufacturer what would they be?
I figure this could hypothetically limit my collection to less than 20 :).
Team Associated: RC10, RC10 Graphite,...
Last post
Oh that is a tough question and one I may have to potentially contemplate in the near future…but I have the collection split into shelf queens that I would find hard to let go and a lot of basket cases that could go tomorrow…if I wasn’t attempting...
I never had one on these as I was an OS guy but they look like a great little engine.
This one came in a bulk lot of stuff and while fairly clean could still use some help.
20240314_221501.jpg
Engine all stripped down, the sleeve was pretty...
Last post
The ABC sleeve is nice, no wonder they were so popular, probably a better engine than the CZ/CV.
The bearings also cleaned up surprisingly well with a bit of love. I tried something a bit different and used cutting oil to work the bearing followed...
Who here uses an ultrasonic cleaner? Has it been reliable? What size, what model, what features (heated, drain, etc), any dislikes? Do metal baskets leave any scars on nylon parts? Ever used it to clean a graphite or aluminum chassis?
Last post
Usually about 8-16 min depending on how skanky the parts are.
Was doing as big clean up this afternoon and was wondering how everybody's work station might look like....could sound cheezy for some but it could give some great ideas on how to ''setup'' a good working station.
Anyways, here's mine:
Last post
Forgive me if I've already posted about this somewhere ... search came up empty. It's something I've been struggling with for a while, but now there's a deadline. I'm getting some new carpet installed, and one of the legs on my workbench is almost...
I thought there should be a thread for tools that people get a lot of use out of, in case it gives others some ideas for their own needs.
Right now, some of my more commonly used tools are my Leatherman Crunch (it's my soldering buddy for...
Last post
I hate not having the right size drill bit, so my family took pity on me this past Christmas and got me a set of letter and number coded drill bits. It is amazing how much less frustrating it it when you have the perfect drive bit size. These do not...
Sometimes you get a mediocre result with a lot of cost and effort.
IMG_3676.jpeg
The bulk head brace is good. Some voids but ok, the battery cover… the pressure was too low and the moisture was too high. Also unfortunately the mold looks like it...
Last post
Who knew you could injection mold ivory soap.
Anyone who wants to clean up in the parts game?? :P :lol:
Curious... are you building a soap box racer??
Ok, no more jokes, I swear... I'm clean out of them. :mrgreen:
This is next level RC - First saw this on Facebook - Danny Huynh Creations. He has incorporated animated driver figures and other cool details like rotating engine parts, machine guns and sound effects. Very Cool. If the link doesn’t work, search...
Last post
I think about buying a bunch of servos and doing something wild after watching only one of his videos. Maybe one day.
The creator is very talented. I bet he finds work in Hollywood.
Does anyone have any of these bodies from the early 90s? I remember them listed in the old Tower catalogs, but have not seen photos of too many examples. Screenshot_20240204_211006_eBay.jpg I would love to get my hands on one someday.
Last post
I did some digging when I first got it, but did not find anything. I agree, it has a familiar appearance.
The undoing will just be a sticker swap.
Would love to find one of the chevy sportside bodies.
So I just got in a lot of parts that had two Form Shift cum holders in it.
The laughter cam e pretty quickly.
Last post
I had to read this thread in short sections because I've been laughing so hard I cant focus on reading. This is legitimately hysterical.
Found this one a while back:
Yeah, that one is logical though, as the commonly used word for transformation...
numbers on rc10.jpg Tried searching Google and I came up empty.
I just realized after all these years, or maybe I forgot, that the #3 on the side of the original JRX2 actually looks like it comes from some numbers you could buy back in the day. Who...
Last post
I used Autographics #103. They look right to me.
20240212_144224.jpg
20240212_144322.jpg
Thanks, I thought that might be it but couldn't find anything to confirm.
Has anyone commissioned repro Peak Performance motor labels/decals? MCI doesn't seem to have them, UltraHive, etc...looking for the yellow with black staggered PP . I pulled the trigger on a silver can yellow label off eBay. There is a killer lot of...
Last post
Actually, I think I have a lead on some NOS Peak Performance decals. I'll look into it more.
Received this little guy in the mail today! As well as RCs, my other obsession is diecast cars so I obviously had to have one of these. I mean, a Hornet-inspired diecast? Its incredible!
20240130_184646.jpg 20240130_150438.jpg
Not sure if there is already a place for this, if not, post current sales and coupons that will help fellow members. I’ll start with MCI Racing. They have a 20% discount for this weekend. I wasn’t aware they made repro RC10 plastic parts and tires....
Last post
I am sure most get the emails, but MCI is running a random 20% off sale through midnight tonight.
I have a Kimbrough servo saver that popped open when I was removing the screw from it after taking it off a servo. Getting the spring back inside the 2 halves of the servo saver body can be really frustrating. However, there are some small holes...
I am having a serious case of deja vu and hoping someone might be able to help. Today after browsing through the Bay, I came across a listing with a car that just…I don’t know…I swear I have seen it somewhere before?
I thought perhaps it was from...
Last post
That’s awesome Lavigna!
RCCA must have really liked that body..they also put that painting article in the 1992 “R/C Car Painting & Finishing Techniques” special issue.
I wanted to create a directory of R/C car shops for RC10talk members to enjoy, so I spent a couple days hunting down every hobby level R/C shop in the United States. Roughly 500 brick and mortar stores and a couple dozen online only. What this list...
Last post
So glad to hear I didn't discover another bogus site, and that is legit!
I also didn't get an Out of Stock email regarding the bodies today, so I'll assume it's a go.
Users browsing this forum: No registered users and 7 guests
Forum permissions
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum
