new graphite racer build to sprint DO

[jsrracing]

is 7364 the right part number for rear arm mounts .

the reason i ask is it does not match the number i have .(but its for a whitepart)

just want to make sure this is the right part.


on a high note the graphite towers and such should be here soon

parts i lack rear arm mounts -working on
front inner pins-working on
shock tower wing mount- i have no idea on this one
diff for trans -maybe used if i can find one, maybe a hole trans
getting close now

[jsrracing]

got a little done today.

[markt311]

I've seen those shocks and front bulkhead somewhere before Oh yeah, in the pits when Brandon was going through Erich's stuff!!

[markt311]

This is going to be nice, We will have enough vintage cars at thunder this winter to have our own class!!! I'm counting 5 right now, maybe we can get Spanky to get his friend to bring out that JRX2. Battman SAYS he has a bunch of old stuff, but his cars usually just fall apart.

[jsrracing]

im pretty stoked 2

ahh some of the parts (namley armmounts)

hey mark do you know the part#

[markt311]

here's the part #s I have for rear arm mounts
0 degree arm mount #7364
1.5 degree toe in arm mount #6366 (this was the one that came with the kit)
3 degree toe in mount #7363

[jsrracing]

thanks . yea i would really like to find the 1.5 to run 1.5 hub to get 3 total toe

it may just be me but anything under 3 degree is just to loose on exit and to tight on apex .

let me know if you find a maker . im checking on my end also .


if all else fails i will field the team car. (really wanted to save it for the nats)

maybe the fleabay rc gods will shine on me with .

omg dude i was over at brandons and the cars . im still slobering

[jsrracing]

ok just so you know i am looking high and low

i talked to my brother today we live about 1500 miles apart.

he sent me these pic after digging for stuff

note that is my motor guard from in the day . i bought a rpm one back in the day and was going to put this up never did but here it is .(this is for the shelf queen)

enough of the rant
question can anyone id these arm mounts

if im not mistaken those are trx kit tires

also is that rc10 or losi bellcranks

[Brandon G]

losi.

[jsrracing]

he is going to box up all he can find should have in a couple of days .

im not sure but i think that gear cover, could it be, rpm for rc10 or you think it is trx

hope he finds all the tires

bellcranks or armmounts, or are both losi


must control,stay on course rc10 race. mhhh trx

[Brandon G]

That's a TRX1 gear cover, James.

Good news is you have some wing mounts on the rear TRX shock tower you can recycle!

[jsrracing]

well i got the rear inner pins and a rear arm mount is on the way . yea

i hope i can use them on the rc10(wing mounts)what is a rc10 with out some losi and trx1 parts

looks like i have until next friday to finish this build . this is the home track (thunder in nashville)

yea it looks like there are a few trx1 parts its .funny that there is a set of rear arm holders, go figure maybe its a omen

[jsrracing]

lucky day lucky day. found a set of rear arm mounts that are rpm whohoo

[markt311]

Heey James! I'm going to need all the traxxas parts you get with that stuff from your brother, shhhh don't tell Brandon

[Brandon G]

Uh oh, so how long will you be in the doghouse for buying another buggy?

Do tell what you got yourself into Mark! Heck, I may have some parts you need.