Browsing through some awesome scans I was hoping you guys might have a catolog from the late 80's that would shed some light on this Losi Revolution motor I have. Not sure what turn it is or if its a double or triple...
Take the endbell off, and check its stacks. It's normally hand written on there if it is a 8X1 / 15X4 etc.... There are no outside visual clues to a Revolution mod motor.
The problem is, Al, that ALL of the Losi Revolution mod motors looked exactly like that with very few exceptions. It wasn't until later on in their production that motors like the Motown Missile and Jr's Choice actually got different decals.
a01butal wrote:I believe that to be a 6056 Insane 15 double.
Was there something on this one that made you know this is a 6056, or just the label can etc?
and oh yeah, it is in the scans archive
Just let me crawl back in my hole, I won't try to answer questions anymore. I thought I had learned my lesson a long time ago but noooo I had to go an open my opinion.
a01butal wrote:I believe that to be a 6056 Insane 15 double.
Was there something on this one that made you know this is a 6056, or just the label can etc?
and oh yeah, it is in the scans archive
Just let me crawl back in my hole, I won't try to answer questions anymore. I thought I had learned my lesson a long time ago but noooo I had to go an open my opinion.
I was serious, I thought there was something that I missed-
Nope - all the early yellow labelled Losi donks had no id on the outside - impossible to tell what it is without pulling it apart and counting the winds - or some did have a wind written on the stack.
Oh - and scr8p (Jason) - I have alittle something here for you mate (it has grown a beard now its been so long!! ) I might send it after Christmas though - dont want it to get lost in the christmas "noise" - LMK if you want me to send anyway.
Cheers
Darryn
TO KNOW WHERE YOU ARE GOING - YOU HAVE TO KNOW WHERE YOU HAVE BEEN VENOM International | Factory Pilot - Team SCHUMACHER UK | J-Concepts USA | B-Fast Performance USA | Bugle Boy Racing | MAX Racing Products International
I bought this sweet Losi Revolution motor a while back, and when I got it, it had sticky residue all over the label.
I tried carefully washing it off, but it seems I wasn't careful enough. :?
Was Ultrahive the only person making repro labels, or...
Just found the 6104 revolution MTM for my JRX-T and a 6060 superstock for my JRX2. Would the 6058 Killer be a good fit for the XX-4 or is there a better option. Trying to stay with the brushed motor for nostalgia.
Last post
There is an old Revolution Motor ad about half way down the last page in this thread: It should help you decide on your 4WD motor choice.
Just found the 6104 revolution MTM for my JRX-T and a 6060 superstock for my JRX2. Would the 6058 Killer be a good fit for the XX-4 or is there a better option. Trying to stay with the brushed motor for nostalgia.
Anyone have a complete listing of the motors and their turns & winds? Can't seem to find a complete catalog of all the Losi Revolution motors.
One motor I have has a I inscribed into the endbell and the other has a K . Any ideas what...
Last post
Thanks I'll take a look at it and see what the inside looks like. How do u count the windings? I've never had to do this as all the motors I've had had the paperwork or were new in package.
I need the front piece that mounts the front swing arms to this truck chassis but I don't know what it is besides it being a Losi. It has to be a 90's truck but not part numbers on it and I bought it back then as just a running truck. I broke the...
Last post
That is the A-1003 front bulkhead. A common failure that makes them hard to find. I have read that the 3D printed ones aren’t very strong but haven’t personally tried one. Your truck looks to be a LXT with a Junior 2/T chassis.
First thing I have to say is that it great to find that a place like this is available. Now for what brought me here.
Can anybody help me ID this car?
Thanks a bunch.
Last post
Hey thanks guys.
I am not into electric but when I seen it something told me to pick it up.
Maybe put it up for sale if I can figure a value on it or maybe flip the gear box around and make it a front wheel drive rear stear nitro frankinbuggy....