lol.....mannn is there a car you haven't done? its looks really really sweet btw, could you post shots of the front bulkhead in the 91' stealth area, the boys in that one are dying to know how it was done....
I come for the RC10's but stay for the Yokomo's
Current projects:
1993 WCS Faux-komo
1994 Yokomo Box-Art
RC10GT Restoration
mine isnt anywhere near like the actual 91 car. its alot like the composite craft chassis but with unique upper camber link mounts, a reversed bulkhead, and the upper plate is cut similar to the 91.
i was told by the seller of one of them that they were made by some dude who sold them at regional events back in the day.
Ok I know it is rc10 based with stealth tranny and a set of mip axles. I know it has new tires and wheels and a lexan body and for the smart asses yest I know its a toy rc car. lol
So the question is what chassis is this and what all info maybe...
so being from the other side of the pond i have not had the privilege of the American education so the culture shock of living here was ...steep but is there something going on this weekend? and if so what do you have planed ?
the wife an i will be...
Last post
For those of you who are extra patriotic ... :mrgreen:
Hello,
Although I am new to this forum I have been building, racing and collecting Associated RC cars for the past 20+ years. I've recently had a 5 year break from the collecting side of things due mainly to concentrating on racing. Now that I've...
I've never had a Pan Car but I'm sort of curious and after a little advice from a few of you guys in my Pan curious thread I settled on some (forgotten to me ) middle ground in the form of the Bolink Digger , the Digger was basically a 1/10 Pan car...
Last post
I found reasons for some of the rear traction/stability issues , firstly the rear pod bulkheads had cracked around the bearing seats for the rear axle leaving the axle unstable , also the grommets used for the lateral pivot of the rear pod were not...
This is my black TRX-1 project that I'm working on. This has been made mostly from available black TRX-1 parts. I used associated battery cups and TRX-3 front arms. I have a new motor plate that I'm thinking about removing the blue anodizing and...
Last post
It is great to see the work you have been doing on your elusive TRX-1. Are you still working on a white version of the TRX-1? Still looking for parts? I've been keeping an eye out for you, but no luck so far. I've seen your postings on RCTech. Good...
I was bored and decided to dig out one of two unrestored RC10's that I would eventually get to (the worst one). I didn't really want to spend any money on this project as I'd rather finish off a few stadium trucks of mine. I knew I had enough parts...
Last post
Thanks guys, I'm pretty happy with it. It looked like it should have been in the bin when I started but now it will be put on my shelf next to the others. Not much left to do to it other then maybe replace one of the battery cups and find a small...
Some of the Parma body molds are now being pulled by Mid America, a slot car shop. I have seen posts of people asking for specific bodies such as the tmaxx dump truck and I requested the grasshopper body- both were added to the website and I'm just...
Last post
Stoked!
Cool!
Thought that said Stolen! at first... had to do a double take... :shock:
*Note to self: must pay more attention when reading :lol: