Project Whiteout Prototype molded chassis
- scr8p
- Administrator
- Posts: 16540
- Joined: Tue Feb 07, 2006 9:46 pm
- Location: Northampton, PA
- Has thanked: 28 times
- Been thanked: 975 times
Re: Project Whiteout Prototype molded chassis
me personally......
i would use any standard black losi pieces that transfered over from jrx-pro. should be everything except the front arms and shock towers right? if so, have someone machine you a pair of se arms in white, and make a set of towers in plain fiberglass.
i would use any standard black losi pieces that transfered over from jrx-pro. should be everything except the front arms and shock towers right? if so, have someone machine you a pair of se arms in white, and make a set of towers in plain fiberglass.
- bearrickster
- Approved Member
- Posts: 4375
- Joined: Thu Mar 06, 2008 11:36 am
- Location: Hollywood Maryland
- Been thanked: 5 times
Re: Project Whiteout Prototype molded chassis
thats the plan but I am going to use BigJeepzz Arms they are white and have the prototype look.scr8p wrote:me personally......
i would use any standard black losi pieces that transfered over from jrx-pro. should be everything except the front arms and shock towers right? if so, have someone machine you a pair of se arms in white, and make a set of towers in plain fiberglass.
any suggestions on who could do the towers? I have the towers for templeplets?
- JK Racing
- Super Member
- Posts: 4603
- Joined: Thu Jul 19, 2007 2:32 pm
- Location: Placentia, CA
- Has thanked: 103 times
- Been thanked: 200 times
Re: Project Whiteout Prototype molded chassis
Rick, since your having so much trouble deciding, just send the chassis to me It will look really nice on my LXT shelfer.
I vote for all original black parts personally....powder coated white motor plate, JRs Choice white label motor too
I vote for all original black parts personally....powder coated white motor plate, JRs Choice white label motor too
--Joey --
Vintage A&L and Factory Works
Old School Racer & Vintage RC Car nut
JKRacingRC.com
Vintage A&L and Factory Works
Old School Racer & Vintage RC Car nut
JKRacingRC.com
Re: Project Whiteout Prototype molded chassis
We have similar taste JK.I vote for all original black parts personally....powder coated white motor plate, JRs Choice white label motor too
"It's not broken, it's British!"
- bearrickster
- Approved Member
- Posts: 4375
- Joined: Thu Mar 06, 2008 11:36 am
- Location: Hollywood Maryland
- Been thanked: 5 times
Re: Project Whiteout Prototype molded chassis
then it would be just another se chassis. no matter what it ends up looking like I want to keep the prototype theam going.Jay Dub wrote:I think you should dye it black...
- Seabass
- Business Member
- Posts: 1402
- Joined: Mon Jul 27, 2009 8:34 pm
- Location: Mississippi
- Been thanked: 12 times
Re: Project Whiteout Prototype molded chassis
Rick, just so you know the arms I made are the exact dimensions of the Pro SE front arms, swept back slightly. When you get them you will see they are identical to the SE front arms, just a bit different design is all.
Jake
Jake
- bearrickster
- Approved Member
- Posts: 4375
- Joined: Thu Mar 06, 2008 11:36 am
- Location: Hollywood Maryland
- Been thanked: 5 times
Re: Project Whiteout Prototype molded chassis
thats great, they look like prototype arms so they fit the bill perfect for this project. I cant wait to get thembigjeepzz wrote:Rick, just so you know the arms I made are the exact dimensions of the Pro SE front arms, swept back slightly. When you get them you will see they are identical to the SE front arms, just a bit different design is all.
Jake
- Brandon G
- Approved Member
- Posts: 2106
- Joined: Mon Oct 01, 2007 4:23 pm
- Location: Nashville, TN
- Been thanked: 2 times
Re: Project Whiteout Prototype molded chassis
There were RPM white gearcovers NIP for sale on fleabay a few days ago. Had them listed for $10. Can't imagine they lasted long...
Dye your white wheels black and hit the lettering in white paint.
Dye your white wheels black and hit the lettering in white paint.
-
- Approved Member
- Posts: 8921
- Joined: Tue Apr 08, 2008 2:44 pm
- Location: USA
- Been thanked: 8 times
Re: Project Whiteout Prototype molded chassis
The good doctor did that to a JRX-Pro, it looks wicked
- bearrickster
- Approved Member
- Posts: 4375
- Joined: Thu Mar 06, 2008 11:36 am
- Location: Hollywood Maryland
- Been thanked: 5 times
Re: Project Whiteout Prototype molded chassis
got a pic of that?Brandon G wrote:There were RPM white gearcovers NIP for sale on fleabay a few days ago. Had them listed for $10. Can't imagine they lasted long...
Dye your white wheels black and hit the lettering in white paint.
-
- Approved Member
- Posts: 8921
- Joined: Tue Apr 08, 2008 2:44 pm
- Location: USA
- Been thanked: 8 times
- bearrickster
- Approved Member
- Posts: 4375
- Joined: Thu Mar 06, 2008 11:36 am
- Location: Hollywood Maryland
- Been thanked: 5 times
Re: Project Whiteout Prototype molded chassis
that does look cool, but I think I am sticking with the White? will see once all of the parts get here and I start getting it together. what body is that, it looks cool, right now I was just going to run a Xcelerator body. and I am thinking of painting 1/2 and keeping one side clear just decaled so you can see the chassis.
- bearrickster
- Approved Member
- Posts: 4375
- Joined: Thu Mar 06, 2008 11:36 am
- Location: Hollywood Maryland
- Been thanked: 5 times
Re: Project Whiteout Prototype molded chassis
I had a little time today, so I got a little work done.
Prototype chassis
Bigjeepzz Arms
Composite Craft top brace (for now)
Jammin Front tower and steering inhansment kit
stock Losi for the rest
Prototype chassis
Bigjeepzz Arms
Composite Craft top brace (for now)
Jammin Front tower and steering inhansment kit
stock Losi for the rest
- Attachments
-
- 178.JPG (51.39 KiB) Viewed 798 times
- 178.JPG (51.39 KiB) Viewed 798 times
-
- 175.JPG (38.24 KiB) Viewed 798 times
- 175.JPG (38.24 KiB) Viewed 798 times
-
- 177.JPG (35.9 KiB) Viewed 798 times
- 177.JPG (35.9 KiB) Viewed 798 times
-
- 176.JPG (38.65 KiB) Viewed 798 times
- 176.JPG (38.65 KiB) Viewed 798 times
Create an account or sign in to join the discussion
You need to be a member in order to post a reply
Create an account
Not a member? register to join our community
Members can start their own topics & subscribe to topics
It’s free and only takes a minute
Sign in
-
- Similar Topics
- Replies
- Views
- Last post
-
- 11 Replies
- 1691 Views
-
Last post by RPMfieldtester
-
- 11 Replies
- 855 Views
-
Last post by FasterLouder
-
- 2 Replies
- 901 Views
-
Last post by RABIDFOX50
-
- 59 Replies
- 8671 Views
-
Last post by Asso_man!
-
- 6 Replies
- 1418 Views
-
Last post by cybercrxt
-
- 29 Replies
- 4436 Views
-
Last post by Welshy40
-
- 17 Replies
- 2655 Views
-
Last post by hugger19
-
- 2 Replies
- 1062 Views
-
Last post by mikedealer
Who is online
Users browsing this forum: No registered users and 12 guests