beeing a tv/appliance tech i'd like to suggest that if you guys are cleaning tires in a dishwasher run some affresh through it when done. http://affresh.com/our_products/affresh_dishwasher_cleaner
all that fine dirt is murder on pump impellers if you have cheaper units that dont have pump screens.
and they also make it for front load washers if you go that route too. http://affresh.com/our_products/affresh_washer_cleaner
this is the best stuff on the market for cleaning washers, we have the giant 3x formula tablets at work that are awesome but the standard ones are just as good.
I was just wondering if this sort of thing would work on a short course truck. I have not seen it done yet but I just got into short course so maybe I just haven't seen it. Is this even worth doing and would it help in any way? Any thoughts or...
Last post
If you plan on racing, also check with your local track. I know most, if not all, my local tracks are clear about no wings/spoilers on any SC.
I can't find any info on what parts I need to get this thing to work on ny original rc10gt. The engine is a os. 18 cv-rx (s) abc. It has a short threaded shaft with a smooth section. You can find pics on tower. Any help would be appreciated.
Last post
found another deal on a tube converted to blue pan. It had a nice os .18 cv in it already, so I figured what the hell, I can see what one is like before I install the other 18 I bought into the steel geared truck.
I have an old Carlsson 1:12 which needed a bit of a cleanup.
When I had removed the battery pack I noticed something odd.
Four out of the cells were soldered on both sides, and from what I know on electricity this just can't work well.
When...
Last post
Well the builder must have given up before even trying it because there's never been any radio gear fitted in the car.
I have some rims that I can't use because the RC10t axles aren't long enough to be able to get the axle screws on. Are these axle extenders ?- will these work?
Thanks
Last post
I don't think those will work. I'm assuming that you either have an A&L wheel or some type of wheel that was designed for a blackfoot.
If this is for the front wheels, there are extended axles out there. However, they usually require 5mm...