A all new complete RC10 Composite Craft / RPM World 1991 , I had an Hydradrive and the Yokomo wheel adapter
On this one I use a Houge Enterprise steering system !
Very clean and nice. I have a question though, do you have the losi hydra drive installed on the buggy in these photos? If you do, how did you get your RPM gear cover to fit?
shodog wrote:Very clean and nice. I have a question though, do you have the losi hydra drive installed on the buggy in these photos? If you do, how did you get your RPM gear cover to fit?
Jim, RPM made the standard gear cover and a special one for the hydra-drive unit, I got one on my whity white RPM chassis too, it's a direct fit
_____________________________________________
_____________________________________________
Come and visit the stable
there were 2 rpm covers for the hydra drive if memory serves, one for a rc10, one for a b2/3, i think they look nearly identical and they arent identifiable to even a keen eye, but the holes are different.
basically the gear comes into contact with the cover. I made sure that the hydra backing is seated properly on the shaft but it looks like it sits out too far.
hmm.. got me on that one.. maybe the wrong spring? one is for a slipper eliminator, one is for use with the hydra. think the silver one is the right one. i have 1 sitting on a car now, and another that is in peices but just put it together and it fits fine
Yes for sure I have the hydradrive under this special RPM cover, if you check the picture of my RPM Team Car, you are able to see the standard RPM gear cover, for slipper !
Hi kenooze, I would be interested in some 2.2in yokomo rims with similar offset like the ones you have on this car as well. Ofcourse, Asa has first crack at them, then I'll take a couple if you still have some Let us know what you got, thanks!
Admittedly going to be a long while until I get into this one, still working out exactly what I want to do with it. C5A92806-54BD-485C-B3E3-C0C7D9E0EE3A.jpeg 0BA8FDC2-4871-4BA4-BAF1-B6DA66345508.jpeg DB2881C1-9CC4-4534-8453-CF8FA7371D6D.jpeg...
Last post
Are you wrenching on this one still? My interest is piqued. :D
RPM Worlds front springs RCCA 05-1993.JPG
Btw probably the only description I’ve ever seen of the springs short of medium and soft.
I've been following a lot of different threads here and I really would like to build a Worlds/OIN car. I ran across this on Ebay last month:
I really wanted it but I was outbid in the end. I later found out that it is a Composite Craft '91...
Last post
Some new updates, I converted to the bigger (1/2 ) bearing RPM rear hubs, a new set of 3/16 CVDs (I thought I ordered shiney but missed the fine print! :evil: ), Brand new rere motor plate, RPM motor guard, GT axles, B4 wheels and PinPoint tires. I...
The CC RPM Worlds was based on the '91 Worlds Stealth buggy that AE developed for the loamy Freedom Hill Park track in Detroit that was hosting the 1991 IFMAR Off-Road Worlds. RPM developed the '91 Worlds front end kit for AE team drivers that...
Last post
The vintage Autographics number decals arrived today. At this point I am calling it done for now. Thanks to all that offered advice and contributed parts to the build. :D
I'm in the middle of building a composite craft/RPM worlds buggy and trying to figure out the best body to use on it. It looks like the ultramolded chassi preference is a losi xx body, but I haven't seen if there is something recommended for the...
Last post
Possibly. I've got other stuff I want to pick up that is higher priority right now.
Been a while, but building a Re-release worlds car with RPM worlds wide arms based on a composite craft chassis. The purpose is to compete in a local vintage race with an edge on the competition !
More details and a complete Bill Of Materials to...
Last post
Finished it minus the electronics. Figured I'd share some pics. I ended up scoring a used original RPM worlds car and pulled the suspension arms / mounts off that and put it on the composite craft chassis. I went with my old colors I used to use...
Here we go again. I've had this NIP Composite Craft Worlds RC10 chassis for a few years. I was torn between building it vintage or modern. Since my first CC RC10 is mostly vintage with some modern touches, I wanted to stick true to one direction on...
Last post
I don’t know man I’m thinking that mini bumper has had that header card since day one…. Not seeing any other staple holes in it. The true tell will be if there’s more holes in the bag :D
I looked at it closely. The header card and staple appear...
since i have so many used parts iam going to use em on this build PLUS been spending a lot of money lately :( so i know it wont be 100% correct build so no stupid comments please :lol: only new parts will be the rear hub carriers by shapeways,...
Last post
ok i never liked how the rear end of this car came out was too narrow so i changed the rear wheels to yokomo wheels and it widened the rear. now it looks better for sure! unnamed.jpg unnamed (5).jpg unnamed (6).jpg