B5 and B5m discussion.....
- DennisM
- Approved Member
- Posts: 2403
- Joined: Sun Feb 26, 2012 12:07 pm
- Location: Denmark
- Has thanked: 30 times
- Been thanked: 61 times
Re: This was on AE Facebook page...
Note to all -
Due to the new differential, the assembly and use of B5M will require a rifle permit.
Due to the new differential, the assembly and use of B5M will require a rifle permit.
Gone fishing
- Phin
- Approved Member
- Posts: 2760
- Joined: Tue Feb 21, 2012 10:17 pm
- Location: NY²
- Has thanked: 72 times
- Been thanked: 201 times
Re: This was on AE Facebook page...
My bad....enlarged the pic to get a better count and the gears look like the same tooth counts.
- CAT3K
- Approved Member
- Posts: 641
- Joined: Mon Dec 06, 2010 12:28 pm
- Location: UK
Re: This was on AE Facebook page...
Is it just me that thinks this looks cheap? Comparing it to the Centros and Vegas anyway.. I know the cars will be fast, AE's always are, but it just doesn't look quality. Plus AE are late to the mid party, so this needs to be really good.
-
- Approved Member
- Posts: 422
- Joined: Wed Sep 04, 2013 5:18 am
- Location: Pico Rivera, CA. USA
Re: This was on AE Facebook page...
You have to remember that these are Team kits not Factory Team. These are like upgraded RTR rolling chassis, the Factory kit is what I'm going to wait for. On a side note I like it.
Javier -
RC10 Shelfer, RC10 Worlds Car Runner, RC10T Shelfer, RC10T2 Runner, SC18, JConcepts BJ4, B5M and counting.
RC10T WOIN Build http://www.rc10talk.com/viewtopic.php?f=36&t=32541
RC10 Shelfer, RC10 Worlds Car Runner, RC10T Shelfer, RC10T2 Runner, SC18, JConcepts BJ4, B5M and counting.
RC10T WOIN Build http://www.rc10talk.com/viewtopic.php?f=36&t=32541
-
- Approved Member
- Posts: 422
- Joined: Wed Sep 04, 2013 5:18 am
- Location: Pico Rivera, CA. USA
Re: This was on AE Facebook page...
The battery they are using here is there new square pack it fits in the same location as a standard saddle pack. Also if I'm not mistaken there are new ROAR rules the state the chassis has to acomodate the fit of saddle and stick/shorty packs. I'm not 100% upto date on the ROAR rules but I do recall reading this. Correct me if I'm wrong anyone.RC10th wrote:As much as I like associated I don't know if I like the new car. Too me it looks a little bit like a sheep following the pack. I don't particularly like the specific molded ball cups. I'm sure the cars will be faster than the 4.2's but I'd like to see one in person first.
I hope it accepts normal, saddle or shorty packs as that reedy battery looks odd.
Javier -
RC10 Shelfer, RC10 Worlds Car Runner, RC10T Shelfer, RC10T2 Runner, SC18, JConcepts BJ4, B5M and counting.
RC10T WOIN Build http://www.rc10talk.com/viewtopic.php?f=36&t=32541
RC10 Shelfer, RC10 Worlds Car Runner, RC10T Shelfer, RC10T2 Runner, SC18, JConcepts BJ4, B5M and counting.
RC10T WOIN Build http://www.rc10talk.com/viewtopic.php?f=36&t=32541
- askbob
- Approved Member
- Posts: 1735
- Joined: Sun Apr 03, 2011 3:24 pm
- Location: KY
- Been thanked: 3 times
Re: This was on AE Facebook page...
Looks interesting! First time I've seen the one piece square battery like that.
- Charlie don't surf
- Approved Member
- Posts: 9021
- Joined: Tue Apr 08, 2008 6:44 pm
- Location: USA
- Has thanked: 60 times
- Been thanked: 115 times
Re: This was on AE Facebook page...
Those packs are the same as a saddle pack in side by side, but across the chassis.
Cars look better than I hoped!
Cars look better than I hoped!
- GreenHell
- Approved Member
- Posts: 495
- Joined: Thu Dec 09, 2010 6:48 pm
- Location: Detroit
- Has thanked: 1 time
Re: This was on AE Facebook page...
Looks like a winner, they definitely took some DNA from the B4 (suspension geometry looks very similar) and took it to the next level. With the new battery arrangement the placement of electronics it looks better than the competition and should be very well balanced. Nice job AE!
But I am holding on to my B4.2 and C4.2 until the Factory Team versions are available.
But I am holding on to my B4.2 and C4.2 until the Factory Team versions are available.
-
- Approved Member
- Posts: 422
- Joined: Wed Sep 04, 2013 5:18 am
- Location: Pico Rivera, CA. USA
Re: This was on AE Facebook page...
The top plate of the front bulkhead reminds me a little of the B2/B3 top plate.
Javier -
RC10 Shelfer, RC10 Worlds Car Runner, RC10T Shelfer, RC10T2 Runner, SC18, JConcepts BJ4, B5M and counting.
RC10T WOIN Build http://www.rc10talk.com/viewtopic.php?f=36&t=32541
RC10 Shelfer, RC10 Worlds Car Runner, RC10T Shelfer, RC10T2 Runner, SC18, JConcepts BJ4, B5M and counting.
RC10T WOIN Build http://www.rc10talk.com/viewtopic.php?f=36&t=32541
-
- Approved Member
- Posts: 1166
- Joined: Fri Mar 11, 2011 9:20 pm
- Location: Houston
- Been thanked: 4 times
Re: This was on AE Facebook page...
I like both of them. I won't but either of them until there is a good looking body available though. It's my own little form of protest against modern cab forward ugliness.
Raborn Racing Originals Shapeways store
-
- Approved Member
- Posts: 1679
- Joined: Mon Aug 14, 2006 2:54 am
- Location: Houston Texas
- Has thanked: 2 times
- Been thanked: 5 times
Re: This was on AE Facebook page...
Looks cheap, but I guess that's the new normal.
Where's the aluminum chassis everyone is talking about?
That body.... WTF? WTF IS GOING ON WITH BODIES THESE DAYS??? This is is driving me crazy! Hard to not feel some disdain for Associated after looking at that atrocity.
Where's the aluminum chassis everyone is talking about?
That body.... WTF? WTF IS GOING ON WITH BODIES THESE DAYS??? This is is driving me crazy! Hard to not feel some disdain for Associated after looking at that atrocity.
- terry.sc
- Approved Member
- Posts: 864
- Joined: Wed Feb 07, 2007 9:58 pm
- Location: Stockport, UK
- Has thanked: 7 times
- Been thanked: 98 times
Re: This was on AE Facebook page...
The ROAR only rule states that it must fit a full size pack, which can be either stick or saddle pack. The B5 is perfectly legal.janaya wrote:Also if I'm not mistaken there are new ROAR rules the state the chassis has to acomodate the fit of saddle and stick/shorty packs. I'm not 100% upto date on the ROAR rules but I do recall reading this. Correct me if I'm wrong anyone.
-
- Approved Member
- Posts: 1166
- Joined: Fri Mar 11, 2011 9:20 pm
- Location: Houston
- Been thanked: 4 times
Re: This was on AE Facebook page...
The aluminum chassis comes with the mid motor version. It has bolt on composite sides. The rear motor is a full composite chassis,.
Raborn Racing Originals Shapeways store
- terry.sc
- Approved Member
- Posts: 864
- Joined: Wed Feb 07, 2007 9:58 pm
- Location: Stockport, UK
- Has thanked: 7 times
- Been thanked: 98 times
Re: This was on AE Facebook page...
On the B5M. If an alloy chassis was the best option for the rear motor version, Associated would have gone with it. Their testing must have shown the moulded chassis was the best option and went with it.justinspeed79 wrote:Where's the aluminum chassis everyone is talking about?
They all look like that because they work the best on the track, unfortunately. We are going to be stuck with them until someone comes up with a nice looking shell that works better on track.That body.... WTF? WTF IS GOING ON WITH BODIES THESE DAYS??? This is is driving me crazy! Hard to not feel some disdain for Associated after looking at that atrocity.
- Seabass
- Business Member
- Posts: 1402
- Joined: Tue Jul 28, 2009 12:34 am
- Location: Mississippi
- Been thanked: 12 times
Re: This was on AE Facebook page...
Body off pics are much better than I expected as well. I may decide to go ahead with the purchase of one, now when does this thing hit the stores?
Edit - $239.00 late Feb http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXEBSC&P=7
Edit - $239.00 late Feb http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXEBSC&P=7
-
- Similar Topics
- Replies
- Views
- Last post
-
- 4 Replies
- 629 Views
-
Last post by thodgez28
-
- 5 Replies
- 167 Views
-
Last post by Brendan2904
-
- 1 Replies
- 538 Views
-
Last post by adam lancia
-
- 6 Replies
- 1114 Views
-
Last post by NomadRacer
-
- 3 Replies
- 1031 Views
-
Last post by MOmo
-
- 10 Replies
- 1695 Views
-
Last post by midse
-
- 10 Replies
- 1680 Views
-
Last post by TRX-1-3
-
- 2 Replies
- 1450 Views
-
Last post by GoldRush
Who is online
Users browsing this forum: CommonCrawl [Bot], DotNetDotCom.org [Bot], Majestic-12 [Bot] and 6 guests