Supernaut - Losi
- Supernaut
- Approved Member
- Posts: 129
- Joined: Tue Nov 05, 2013 5:30 pm
- Location: Algonac, MI
- Has thanked: 5 times
- Been thanked: 66 times
Supernaut - Losi
I only have 2 Losi cars. I just finished the XX CR today.
The XX CR is one nice car. Great design!!
I was too lazy to do a build thread.
The JRX-Pro was done last year sometime. Just thought I would throw it in the same post.
The XX CR is one nice car. Great design!!
I was too lazy to do a build thread.
The JRX-Pro was done last year sometime. Just thought I would throw it in the same post.
Love to build......need to practice painting
Associated - Worlds, B6D
Traxxas - Rad2, TCP, Stampede, Villain IV
Tamiya - CLODBUSTER
As you can see....I sold most of my cars. Funding Pinball now.
Associated - Worlds, B6D
Traxxas - Rad2, TCP, Stampede, Villain IV
Tamiya - CLODBUSTER
As you can see....I sold most of my cars. Funding Pinball now.
Re: Supernaut - Losi
Very nice cars !
Could you tell me more about the motor mount on your XX-CR ? is it red anodized or painted ?
Could you tell me more about the motor mount on your XX-CR ? is it red anodized or painted ?
-
- Approved Member
- Posts: 196
- Joined: Thu Oct 20, 2011 11:11 am
- Location: Scotland
- Been thanked: 2 times
Re: Supernaut - Losi
Cool! You got the xx together then I haven't seen one with the parts dyed red like that.
Those wheels might take some rit too
Those wheels might take some rit too
Anodized. The original ones were silver then they were anodized blue and red apparently?pottok wrote:Could you tell me more about the motor mount on your XX-CR ? is it red anodized or painted ?
- Supernaut
- Approved Member
- Posts: 129
- Joined: Tue Nov 05, 2013 5:30 pm
- Location: Algonac, MI
- Has thanked: 5 times
- Been thanked: 66 times
Re: Supernaut - Losi
Yes Red Anodized
That is how I got it.
That is how I got it.
Love to build......need to practice painting
Associated - Worlds, B6D
Traxxas - Rad2, TCP, Stampede, Villain IV
Tamiya - CLODBUSTER
As you can see....I sold most of my cars. Funding Pinball now.
Associated - Worlds, B6D
Traxxas - Rad2, TCP, Stampede, Villain IV
Tamiya - CLODBUSTER
As you can see....I sold most of my cars. Funding Pinball now.
Re: Supernaut - Losi
Thanks for your answers.
The blue anodized is original on tke BK kit but i didn't know the red anodized. Maybe home anodized or aftermarket part.
The blue anodized is original on tke BK kit but i didn't know the red anodized. Maybe home anodized or aftermarket part.
- jamin
- Approved Member
- Posts: 1157
- Joined: Thu Dec 16, 2010 5:58 am
- Location: Suffolk, UK
- Been thanked: 24 times
Re: Supernaut - Losi
You are very lucky indeed, thats a mk1 motor plate, in the 2-3 years i've been building my Losi cars, i've never seen one come up for saleSupernaut wrote:Yes Red Anodized
That is how I got it.
Team Losi: XX-CR | XXT | XXT-CR Graphite+ | XX4 | Street Weapon IWC Edition
-
- Approved Member
- Posts: 8921
- Joined: Tue Apr 08, 2008 2:44 pm
- Location: USA
- Been thanked: 8 times
Re: Supernaut - Losi
I knew a place that has 6 raw ones like this hanging on the wall...I'll make a call and see if they're still there
- jamin
- Approved Member
- Posts: 1157
- Joined: Thu Dec 16, 2010 5:58 am
- Location: Suffolk, UK
- Been thanked: 24 times
Re: Supernaut - Losi
I'd settle for just one, part no A-9920:Charlie don't surf wrote:I knew a place that has 6 raw ones like this hanging on the wall...I'll make a call and see if they're still there
Apologies for the thread hijacking!
Team Losi: XX-CR | XXT | XXT-CR Graphite+ | XX4 | Street Weapon IWC Edition
-
- Approved Member
- Posts: 8921
- Joined: Tue Apr 08, 2008 2:44 pm
- Location: USA
- Been thanked: 8 times
Re: Supernaut - Losi
That's them, I was told that the shop was cleared out a few years ago...but recently found out otherwise-
- Supernaut
- Approved Member
- Posts: 129
- Joined: Tue Nov 05, 2013 5:30 pm
- Location: Algonac, MI
- Has thanked: 5 times
- Been thanked: 66 times
Re: Supernaut - Losi
I actually got that buggy as a parts lot (cheap), I needed parts to finish another XX
I did not really know what I had until I saw all the parts together when it was delivered.
The parts were all individually bagged and then I noticed the front shock tower and looked it up.
There was basically a whole XX CR buggy there, I just had to clean it up and put it together.
The motor mount, RPM Gear Cover, and RPM Bumper included.
I also have some Old Stock that was included, bumper, sway bar kit, and a few other hard to find parts.
The other XX buggy will not be completed......
I did not really know what I had until I saw all the parts together when it was delivered.
The parts were all individually bagged and then I noticed the front shock tower and looked it up.
There was basically a whole XX CR buggy there, I just had to clean it up and put it together.
The motor mount, RPM Gear Cover, and RPM Bumper included.
I also have some Old Stock that was included, bumper, sway bar kit, and a few other hard to find parts.
The other XX buggy will not be completed......
Love to build......need to practice painting
Associated - Worlds, B6D
Traxxas - Rad2, TCP, Stampede, Villain IV
Tamiya - CLODBUSTER
As you can see....I sold most of my cars. Funding Pinball now.
Associated - Worlds, B6D
Traxxas - Rad2, TCP, Stampede, Villain IV
Tamiya - CLODBUSTER
As you can see....I sold most of my cars. Funding Pinball now.
- DerbyDan
- Approved Member
- Posts: 1836
- Joined: Tue Sep 08, 2009 8:04 am
- Location: Northampton UK
- Has thanked: 2 times
- Been thanked: 17 times
Re: Supernaut - Losi
Nice cars Supernaut!!pottok wrote:Thanks for your answers.
The blue anodized is original on tke BK kit but i didn't know the red anodized. Maybe home anodized or aftermarket part.
Regarding the motorplate - yes the kit motorplate was blue on the Kinwald, but that was a non-machined item... I brought a blue anodised machined motorplate new in a Losi header card to the original #9920 groove pattern - this would have before the release of the Kinwald kit - also on the rack was a machined plate in red
My T.C Showroom; http://www.tamiyaclub.com/member.asp?id=28990
- jamin
- Approved Member
- Posts: 1157
- Joined: Thu Dec 16, 2010 5:58 am
- Location: Suffolk, UK
- Been thanked: 24 times
Re: Supernaut - Losi
Hey Dan, I am sure they were custom anodised and put back in their header cards, I dont recall Losi ever making official ones, not even in black like Kinwald had on his XXT (which I need for my replica), not that it matters mindDerbyDan wrote:Regarding the motorplate - yes the kit motorplate was blue on the Kinwald, but that was a non-machined item... I brought a blue anodised machined motorplate new in a Losi header card to the original #9920 groove pattern - this would have before the release of the Kinwald kit - also on the rack was a machined plate in red
Team Losi: XX-CR | XXT | XXT-CR Graphite+ | XX4 | Street Weapon IWC Edition
- DerbyDan
- Approved Member
- Posts: 1836
- Joined: Tue Sep 08, 2009 8:04 am
- Location: Northampton UK
- Has thanked: 2 times
- Been thanked: 17 times
Re: Supernaut - Losi
I think that may have been something that I had suggested - but cannot be sure.... with the appearance of some annodised plates stateside I have started to wonder if they were coloured from the factory?jamin wrote:Hey Dan, I am sure they were custom anodised and put back in their header cards, I dont recall Losi ever making official ones, not even in black like Kinwald had on his XXT (which I need for my replica), not that it matters mindDerbyDan wrote:Regarding the motorplate - yes the kit motorplate was blue on the Kinwald, but that was a non-machined item... I brought a blue anodised machined motorplate new in a Losi header card to the original #9920 groove pattern - this would have before the release of the Kinwald kit - also on the rack was a machined plate in red
My T.C Showroom; http://www.tamiyaclub.com/member.asp?id=28990
-
- Approved Member
- Posts: 8921
- Joined: Tue Apr 08, 2008 2:44 pm
- Location: USA
- Been thanked: 8 times
Re: Supernaut - Losi
I've seen purple anno factory plates. The red ones seem to make me think Fantom re-worked them to match the red parts they madeDerbyDan wrote:I think that may have been something that I had suggested - but cannot be sure.... with the appearance of some annodised plates stateside I have started to wonder if they were coloured from the factory?jamin wrote:Hey Dan, I am sure they were custom anodised and put back in their header cards, I dont recall Losi ever making official ones, not even in black like Kinwald had on his XXT (which I need for my replica), not that it matters mindDerbyDan wrote:Regarding the motorplate - yes the kit motorplate was blue on the Kinwald, but that was a non-machined item... I brought a blue anodised machined motorplate new in a Losi header card to the original #9920 groove pattern - this would have before the release of the Kinwald kit - also on the rack was a machined plate in red
Badd Boyz repackaged tons of AE parts and Losi parts in custom anno colors BITD too
Create an account or sign in to join the discussion
You need to be a member in order to post a reply
Create an account
Not a member? register to join our community
Members can start their own topics & subscribe to topics
It’s free and only takes a minute
Sign in
-
- Similar Topics
- Replies
- Views
- Last post
-
- 12 Replies
- 2285 Views
-
Last post by hugger19
-
- 8 Replies
- 2094 Views
-
Last post by License2iLL
-
- 5 Replies
- 737 Views
-
Last post by highwayracer
-
- 4 Replies
- 683 Views
-
Last post by tecnica2001
-
- 4 Replies
- 415 Views
-
Last post by mrlexan
-
- 17 Replies
- 3658 Views
-
Last post by bearrickster
-
- 5 Replies
- 1579 Views
-
Last post by lotus74
-
- 7 Replies
- 711 Views
-
Last post by vintage88
Who is online
Users browsing this forum: DotNetDotCom.org [Bot] and 20 guests