RC10 Factory Works MIP 93' Worlds Racer Restoration
- Asso_man!
- Approved Member
- Posts: 3960
- Joined: Thu Aug 03, 2006 7:49 am
- Location: EU
- Has thanked: 40 times
- Been thanked: 82 times
Re: RC10 Factory Works MIP 93' Worlds Racer Restoration
Yup the antenna mount is drilled on the side and screwed on the shock tower definitely. You did and awesome job restoring this car to its original condition. Kudoz!!!RC10resto wrote:looks like a shock tower cap screw is going right thru the side of the antenna mount?Vintagemishal wrote:The bulkhead is the original to the car and there was a glue stain on the top where I remounted the antenna base. Not sure how it could be mounted to the shock tower?RC10resto wrote:Should the antenna mount be screwed to the shock tower?
Looks like you have it on the bulkhead?
Not sure just asking - car looks great.
_____________________________________________
_____________________________________________
Come and visit the stable
_____________________________________________
Come and visit the stable
-
- Approved Member
- Posts: 2022
- Joined: Sat Jan 20, 2007 4:41 pm
- Location: Cape Carteret.NC
- Been thanked: 4 times
-
- Approved Member
- Posts: 502
- Joined: Wed Sep 23, 2009 1:51 pm
- Location: Portland, OR
- Been thanked: 3 times
Re: RC10 Factory Works MIP 93' Worlds Racer Restoration
Thanks everyone! Looks like I am going to have to change the antenna mount now. 

-
- Approved Member
- Posts: 502
- Joined: Wed Sep 23, 2009 1:51 pm
- Location: Portland, OR
- Been thanked: 3 times
-
- Approved Member
- Posts: 36
- Joined: Thu Apr 11, 2013 7:58 pm
- Location: Florida
- Been thanked: 1 time
Re: RC10 Factory Works MIP 93' Worlds Racer Restoration
This is a great build, with a great back story. I am extremely impressed by your attention to detail, and I would like to make a contribution.Vintagemishal wrote:I replicated the number plates the best I could
I still have a few number plates from the 93 Worlds, and number 10 just happens to be one of them. This is a reproduction set, but I made them by scanning an original. Send me a PM, and I'll put these in the mail.
- bully
- Approved Member
- Posts: 759
- Joined: Mon May 31, 2010 6:08 am
- Location: Perth W.A Australia
- Been thanked: 6 times
Re: RC10 Factory Works MIP 93' Worlds Racer Restoration
Dunno how I missed this but gotta say wow mate this thread and buggy are awesome... Congratulations,you definitely got a killer deal.. Jealous,excellent score and lucky we have some very keen eye members here,kinda like winning lotto twice... Great work to all who contributed
-
- Approved Member
- Posts: 502
- Joined: Wed Sep 23, 2009 1:51 pm
- Location: Portland, OR
- Been thanked: 3 times
Re: RC10 Factory Works MIP 93' Worlds Racer Restoration
This car has been on the back burner. It is still not 100% complete. I have been very ill with serious health issues and have not been on here in quite some time. BradR, I have sent you a PM regarding numbers. I am still looking for the Autographics American Flag decals. I woke up this morning and thought that I need to get some more finished up on this car. I have been unsuccessful in getting in touch with Scott Montgomery (can't find him). Thomas Hightower is just angry and does not want to talk about the car? Thanks again to all who have helped with this restoration!
Todd
Todd
- littleVETTE
- Approved Member
- Posts: 1418
- Joined: Mon Aug 11, 2008 4:07 pm
- Location: U.S.A.
- Has thanked: 6 times
- Been thanked: 9 times
Re: RC10 Factory Works MIP 93' Worlds Racer Restoration
todd sorry to hear about your health. pull through it buddy.Vintagemishal wrote:This car has been on the back burner. It is still not 100% complete. I have been very ill with serious health issues and have not been on here in quite some time. BradR, I have sent you a PM regarding numbers. I am still looking for the Autographics American Flag decals. I woke up this morning and thought that I need to get some more finished up on this car. I have been unsuccessful in getting in touch with Scott Montgomery (can't find him). Thomas Hightower is just angry and does not want to talk about the car? Thanks again to all who have helped with this restoration!
Todd
this thread still doesn't disappoint one bit.
-
- Approved Member
- Posts: 502
- Joined: Wed Sep 23, 2009 1:51 pm
- Location: Portland, OR
- Been thanked: 3 times
Re: RC10 Factory Works MIP 93' Worlds Racer Restoration
Thanks Rob, long time no see! A huge thank you goes out to Brad Reelf for sending me the "real" numbers I needed for this restoration. They just arrived and I promptly applied them! Awesome! Thanks again Brad and everyone who has provided parts for this, it is very much appreciated!






- RC10resto
- Approved Member
- Posts: 3008
- Joined: Tue Sep 09, 2008 2:26 am
- Location: Los Angeles, CA
- Has thanked: 1449 times
- Been thanked: 548 times
Re: RC10 Factory Works MIP 93' Worlds Racer Restoration
What a save, looks incredible
Thank god you found out what it was before it was too late.
One of the best threads ever, found to finished.

Thank god you found out what it was before it was too late.
One of the best threads ever, found to finished.
-
- Approved Member
- Posts: 502
- Joined: Wed Sep 23, 2009 1:51 pm
- Location: Portland, OR
- Been thanked: 3 times
- littleVETTE
- Approved Member
- Posts: 1418
- Joined: Mon Aug 11, 2008 4:07 pm
- Location: U.S.A.
- Has thanked: 6 times
- Been thanked: 9 times
Create an account or sign in to join the discussion
You need to be a member in order to post a reply
Create an account
Not a member? register to join our community
Members can start their own topics & subscribe to topics
It’s free and only takes a minute
Sign in
-
- Similar Topics
- Replies
- Views
- Last post
-
- 45 Replies
- 8198 Views
-
Last post by Beatnik
-
- 15 Replies
- 4927 Views
-
Last post by scr8p
-
- 42 Replies
- 9143 Views
-
Last post by R6cowboy
-
- 1 Replies
- 589 Views
-
Last post by juicedcoupe
-
- 37 Replies
- 3569 Views
-
Last post by scr8p
-
- 1 Replies
- 1545 Views
-
Last post by RCveteran
-
- 115 Replies
- 25147 Views
-
Last post by NomadRacer
-
- 13 Replies
- 3873 Views
-
Last post by alcyon
Who is online
Users browsing this forum: Ahrefs [Bot],
Mojeek [Bot],
RogueIV and 9 guests