If you know what all is on the car,, please let me know. I think the suspension is all CRP or MRP, white plastic. I have no idea about the red shocks, chassis, roll cage.
Looks like CRP chassis, RCH nylon suspension, and ARS cage. The shocks look like Ranch Pit Stop. Im not sure about the steering rods, but they look like a common Dubro part, which was likely sold under several different names. The body also looks like something from RPS. Tires look like CRP. Speed control is race prep.
The futaba radio is mint, as though never used. The car looks like some of the parts were used, but the overall build looks fresh. Possibly restored from race condition and put away. The chassis does not look run at all, but the bumper is scratched. The body looks like a shelf queen. Its got a thick bent plastic thing that may be part of the plastic thing on the roof. Possibly a sprint wing??
I see Super Champ steel universals. I think the cage and nerf bars are RCH. CRP nerfs stick out as far as the wheels and the CRP/ARS cages rear bars bend downwards not long after they leave they main loop. Proline bumper. I'm pretty sure that the body is Parma Chenowth.
Now you've got to pull the gearbox apart to see which diff is in it.
Started with the basic idea of SRB, pretty much keep a tiny bit of SRB and some after market structural geometry. Plenty of custom made, CNC & hand made parts too.
Together also show my out of whack Mugen Bulldog lol ;)
Here's my SRB racer. I always wanted a hot SRB racer back in the 80's. So I decided to create one. I put this one together using Buggy Champ parts. The chassis is 2.75mm thick carbon fibre cut with a Dremel then filed and sanded by me. I made...
I finally got round to picking up an old rough rider to start a project , although its got a lot of very early parts its in a used condition and never going to be a shelf queen , this is ideal as what I'm planning is kind of a scale look runner ....
Last post
As I get older I trust my memory less and less :lol: no halm no foul on the thread size.
Here's some recent shots of the car running at the recent Vintage buggy festival at Castle Hill Sydney Australia.
I've been looking for one of these gearbox setups for my SRB buggy for years..
This would make it almost...
Last post
Hey guys - just wondering if anyone can tell me if there is a way to reduce the amount of slop in the front arms? It seems like there is a lot of side to side movement in the shafts that the arms attach to.
Someone asked to see a car I had on my workbench a bit closer, so here it is. This is the original Super Champ I had when I was 12, which was a box of parts up until about five or six years ago. I had to get ebay to help me get it running again, and...
Last post
Looks good, you put a lot of time in to it definitely the toughest SRB I've ever seen good job :wink: