![Image](http://i247.photobucket.com/albums/gg131/shodog1/HPI%20RS4%20Original/D14D42A5-57C3-4748-B95D-1C444BE597AF_zpsdofqhpt9.jpg)
![Image](http://i247.photobucket.com/albums/gg131/shodog1/HPI%20RS4%20Original/0D07E7C3-4F04-41BD-889B-9D0E15FC777F_zps5eaeg15y.jpg)
![Image](http://i247.photobucket.com/albums/gg131/shodog1/HPI%20RS4%20Original/2E56B340-FD21-4E3C-8262-62681269D281_zpsn6aldnit.jpg)
I started thinking about what I wanted to accomplish with my original car and whether I wanted to keep it stock or to modify it. After I finished my Pro2 I was left with a lot of parts from it I could use for this chassis. I did some experimenting with the suspension arms but in the end I decided to use just the Pro2 dampers and MIP Cvd's. I'm going to trick it out the way I wish I could have afforded to do back then. Over the years I've collected a few more new parts for it.
![Image](http://i247.photobucket.com/albums/gg131/shodog1/HPI%20RS4%20Original/919B1200-1CE8-4D20-8028-1AE22B3B523E_zpsler7fgsv.jpg)
![Image](http://i247.photobucket.com/albums/gg131/shodog1/HPI%20RS4%20Original/EDB0BBC7-69DD-4697-9024-C59D9D2F15F1_zpsmd7jeacj.jpg)
![Image](http://i247.photobucket.com/albums/gg131/shodog1/HPI%20RS4%20Original/FB5BB0EE-DF88-4425-9EBE-FF937E36ACFC_zpsf1pslelg.jpg)
![Image](http://i247.photobucket.com/albums/gg131/shodog1/HPI%20RS4%20Original/66547B03-5BFA-44C0-AE01-18106A1F418C_zpspazifiw0.jpg)
![Image](http://i247.photobucket.com/albums/gg131/shodog1/HPI%20RS4%20Original/9A2738DA-387B-4662-B5D5-7195BC7542E8_zpscdjil6vw.jpg)
I've spent way too much money on it but I don't care. I have only a handful of vintage cars that I've owned since new so this car means much more to me than the $25 its actually worth.
I completely disassembled the car and gave the parts I was going to reuse a thorough cleaning. I started with the rear transmission and worked from there.
![Image](http://i247.photobucket.com/albums/gg131/shodog1/HPI%20RS4%20Original/2D7CC7D3-E1E9-4125-A0CE-4949B784240D_zpse8ihgctw.jpg)
One thing that was cool about this car is you could build it either 200mm or 190mm. To do it 190 you have to cut the arms down so I used a couple of washers and a bolt as a guide to cut the 200mm holes off.
![Image](http://i247.photobucket.com/albums/gg131/shodog1/HPI%20RS4%20Original/89324D55-F91D-4647-993A-CA366FB2AB55_zpstfkigwqv.jpg)
![Image](http://i247.photobucket.com/albums/gg131/shodog1/HPI%20RS4%20Original/F9CD3B51-65C1-4F7A-9C8D-119CEB82B2BD_zpsg3e9h6oz.jpg)
I got it built to this point and lost interest
![Image](http://i247.photobucket.com/albums/gg131/shodog1/HPI%20RS4%20Original/0B4D80A9-9333-42D3-9C44-0EA6FE875FEF_zpslpgpf3gg.jpg)
![Image](http://i247.photobucket.com/albums/gg131/shodog1/HPI%20RS4%20Original/32723367-2298-44BF-A77F-3B36FA30A31E_zpszdklysgk.jpg)
All this sheltering in place has allowed me to do some work on my long lost projects. I pulled it back out and got it built up this this point
![Image](http://i247.photobucket.com/albums/gg131/shodog1/HPI%20RS4%20Original/BACDB536-9DC2-4299-8215-8C1E05DE4B2E_zpsmx1dshtq.jpg)
![Image](http://i247.photobucket.com/albums/gg131/shodog1/HPI%20RS4%20Original/655BD842-2D22-44FD-AB2B-D2272D527932_zpszt7abe62.jpg)
![Image](http://i247.photobucket.com/albums/gg131/shodog1/HPI%20RS4%20Original/15CE9330-664C-4971-A2CB-0019F85EA963_zpseymi64v2.jpg)