If a jobs not worth doing then its certainly not worth doing well.
A problem shared is a problem halved but an advantage shared is no advantage at all.
Here's a Power Pacing Products OM-10 conversion for the RC10L that I recently finished. There isn't much info out there on this one, and only one magazine article on the company's later MID conversion. This conversion uses a narrow lower rear pod...
Not electronics as such, but I got these old Demon decals today !
I am still looking for the really old prismatic red ones, but in the meantime these are pretty great to find.
I just picked up a Schumacher C-car, and it came with this beauty from 1981.
Before my time I started racing in 1985, My first speed control was a Demon king 6x BUZ11 fets although I recall upgrading it to proking spec by installing the other 2...
Last post
Interesting dating and unit number comparison there if you think about it.
Mine was unit number 780 from week 40, and just 3 weeks later yours was unit number 831. So 51 units between them. I am guessing Nick wasn't making various speedo models at...
Thread dedicated to the wonderful motors of Nick Adams (RIP) of Demon Power Products.
No other motors please.
There are pictures and discussion about Demon motors spread over the forum.
But it´s quite a bit difficult to follow so I would like to...
Last post
This little demon is new to me and it needs a set of brushes, but they aren't laydown or stand-up brushes. They are square. I've never seen this type of brush before and don't know what to look for. Any thoughts? Just search by the width and height...
I wasn't sure where to post first, so figured I'd start here.
I recently stumbled across my old Yokomo YZ-834B Dogfighter and though it would be good to see if I can get it working again. I'm starting with the Demon 2D speed controller as I...
Last post
Yeah, sorry about that. It's disabled for new members due to people creating accounts just to harass others.
Not all of you will be aware that as well as motors and ESC's, Nick Adams of Demon Power products also dabbled in the 1/12th market, and for the 1983 season he developed his 'Demon MF-1' car (sometimes also called the MF-83 designating the year)....
Last post
She is hanging on to it as a tribute to her father although has agreed to send me the axles for this car so I can finish it.
Good to know, a lot of these pieces of RC history end up being sold off or thrown away. Of course there's plenty of us who...