Need help identifying this RC10
Need help identifying this RC10
Hello all. I just came across this RC10 but don’t know anything about it. What model or year it is from. I have the opportunity to buy it, but wanted to check if I’ll still be able to get it running again. I was only able to snap this quick over the top picture. Will replacement parts still be available or would it have to be a shelf queen? I’d love to actually run it, but not if it’ll be difficult to replace anything that breaks. I wouldn’t be opposed to updating it if possible too. Well any help and insight would be appreciated.
-
- Approved Member
- Posts: 1280
- Joined: Tue Dec 30, 2008 3:02 am
- Location: michigan
- Been thanked: 87 times
Re: Need help identifying this RC10
Hello that is a RC10 graphite six gear from the mid to late 80s. It looks pretty rough. The chassis has had the front kick up cut off and a aluminum kick up hacked in. The motor plate has been cut up also. Most of the parts have been discontinued so Ebay is your best bet for parts and they are getting pricey. I myself would pass on this one .
Re: Need help identifying this RC10
Thanks for the quick reply. After I posted this I’ve been pouring through several pages here on RC10talk trying to figure out what it was. The aluminum front was throwing me off. What about the black arms? Were those stock? Or are those dyed black? I assume the direct steering is also not stock.rctenracer wrote: ↑Mon Mar 22, 2021 7:22 pm Hello that is a RC10 graphite six gear from the mid to late 80s. It looks pretty rough. The chassis has had the front kick up cut off and a aluminum kick up hacked in. The motor plate has been cut up also. Most of the parts have been discontinued so Ebay is your best bet for parts and they are getting pricey. I myself would pass on this one .
- XLR8
- Approved Member
- Posts: 3019
- Joined: Sun Feb 19, 2017 3:46 am
- Location: north/central Alabama
- Has thanked: 1273 times
- Been thanked: 913 times
Re: Need help identifying this RC10
It appears that all nylon parts have been dyed black.
Out of the box, they were natural or off-white in color.
Also, these cars came with bell crank steering.
Out of the box, they were natural or off-white in color.
Also, these cars came with bell crank steering.
Doug
-
- Approved Member
- Posts: 1280
- Joined: Tue Dec 30, 2008 3:02 am
- Location: michigan
- Been thanked: 87 times
Re: Need help identifying this RC10
Looking at the pic. again the kickup hasn't been cut off but is in bad shape. The aluminum kickup was probably just used to sandwich the graphite chassis to the front arm mounts. Are those ball cups glued into a butt connector.
- juicedcoupe
- Super Member
- Posts: 3008
- Joined: Sun Aug 16, 2020 4:05 pm
- Location: Pascagoula, MS
- Has thanked: 235 times
- Been thanked: 1753 times
Re: Need help identifying this RC10
If the price was decent, I'd probably buy it. But I also have a stash of RC10 parts.
Always looking for new and interesting ways to waste money.
- scr8p
- Administrator
- Posts: 16540
- Joined: Tue Feb 07, 2006 9:46 pm
- Location: Northampton, PA
- Has thanked: 28 times
- Been thanked: 976 times
Re: Need help identifying this RC10
At minimum, a 1/4" has been cut off the front edge of the kickup.rctenracer wrote: ↑Mon Mar 22, 2021 8:55 pm Looking at the pic. again the kickup hasn't been cut off but is in bad shape. The aluminum kickup was probably just used to sandwich the graphite chassis to the front arm mounts. Are those ball cups glued into a butt connector.
- MarkyDents
- Approved Member
- Posts: 1025
- Joined: Sun Jan 10, 2021 11:52 am
- Location: Staten Island, N.Y.
- Has thanked: 1374 times
- Been thanked: 512 times
Re: Need help identifying this RC10
Admittedly the first time I’ve seen an RC10 without the bellcranks.... poor poor graphite
Please correct me if I’m wrong but wasn’t the Graphite released in 89’-90’
Please correct me if I’m wrong but wasn’t the Graphite released in 89’-90’
Who do you race for ?
Me……. I race for me.
That’s impossible, I was told you need a sponsor to race.
Hey Cru ! Go balls out
Me……. I race for me.
That’s impossible, I was told you need a sponsor to race.
Hey Cru ! Go balls out
- MarkyDents
- Approved Member
- Posts: 1025
- Joined: Sun Jan 10, 2021 11:52 am
- Location: Staten Island, N.Y.
- Has thanked: 1374 times
- Been thanked: 512 times
Re: Need help identifying this RC10
The majority of parts make me feel as though it’s an earlier gold tub with long front arms and graphite chassis. Namely the single hole towers and fully threaded turnbuckles.
Who do you race for ?
Me……. I race for me.
That’s impossible, I was told you need a sponsor to race.
Hey Cru ! Go balls out
Me……. I race for me.
That’s impossible, I was told you need a sponsor to race.
Hey Cru ! Go balls out
Re: Need help identifying this RC10
Wow. You guys are great. All this info from a single photo!! I think I’ll pick this up after all. Once I get it and clean it up a bit I’ll take more photos.
Re: Need help identifying this RC10
Well, I missed out on this one after all. Tried to pick it up today and he decided to hold onto it. If only I had the $40 yesterday I could have bought it.
- juicedcoupe
- Super Member
- Posts: 3008
- Joined: Sun Aug 16, 2020 4:05 pm
- Location: Pascagoula, MS
- Has thanked: 235 times
- Been thanked: 1753 times
Re: Need help identifying this RC10
$40? I hope you mean $40 more than whatever you had on you. I just bought a six gear transmission for $60 and thought it was a fairly good deal.
Always looking for new and interesting ways to waste money.
- MarkyDents
- Approved Member
- Posts: 1025
- Joined: Sun Jan 10, 2021 11:52 am
- Location: Staten Island, N.Y.
- Has thanked: 1374 times
- Been thanked: 512 times
Re: Need help identifying this RC10
Yes he’s holding onto it alright......Wouldn’t be surprised if he checked out the going prices on eBay and ends up listing it.
Who do you race for ?
Me……. I race for me.
That’s impossible, I was told you need a sponsor to race.
Hey Cru ! Go balls out
Me……. I race for me.
That’s impossible, I was told you need a sponsor to race.
Hey Cru ! Go balls out
- MarkyDents
- Approved Member
- Posts: 1025
- Joined: Sun Jan 10, 2021 11:52 am
- Location: Staten Island, N.Y.
- Has thanked: 1374 times
- Been thanked: 512 times
Re: Need help identifying this RC10
Sorry you missed out bud, I’m sure you’ll find one. Hopefully in better shape to start with.
Who do you race for ?
Me……. I race for me.
That’s impossible, I was told you need a sponsor to race.
Hey Cru ! Go balls out
Me……. I race for me.
That’s impossible, I was told you need a sponsor to race.
Hey Cru ! Go balls out
Re: Need help identifying this RC10
Yeah. $40 straight up. Probably my fault too when I started asking if he had any other spare parts or hop ups to go with it. Got too greedy. I was buying a Rustler roller from him too, so I was trying to work the bundle deal angle.
Create an account or sign in to join the discussion
You need to be a member in order to post a reply
Create an account
Not a member? register to join our community
Members can start their own topics & subscribe to topics
It’s free and only takes a minute
Sign in
-
- Similar Topics
- Replies
- Views
- Last post
-
- 18 Replies
- 3462 Views
-
Last post by RC10CE75
-
- 13 Replies
- 1991 Views
-
Last post by Winger
-
- 1 Replies
- 419 Views
-
Last post by RC10resto
-
- 19 Replies
- 2239 Views
-
Last post by TheSpeedway
-
- 13 Replies
- 1663 Views
-
Last post by durb69
-
- 1 Replies
- 826 Views
-
Last post by GoMachV
-
- 6 Replies
- 1044 Views
-
Last post by sgirouard
-
- 2 Replies
- 767 Views
-
Last post by Coelacanth
Who is online
Users browsing this forum: Amazon [Bot] and 46 guests