So what did you get in the post today ???

When it's R/C related, but doesn't fit anyplace else.

Moderators: scr8p, klavy69

User avatar
RC10th
Approved Member
Posts: 3998
Joined: Sat Feb 16, 2013 2:51 pm
Location: Australia
Has thanked: 26 times
Been thanked: 672 times

Re: So what did you get in the post today ???

Post by RC10th »

Retro rc wrote: Sat Nov 12, 2022 10:14 pm
Incredible_Serious wrote: Fri Nov 11, 2022 9:58 pm
Retro rc wrote: Fri Nov 11, 2022 8:52 pm Think you’d need more than his spare room for all your gear😂
Would have to get all his gear out first.... probably an impossibility.

If I'm moving in with RJ, I'll have no gear to move.... most likely will be in a big pile somewhere, on fire.
😂😂😂😂😂
I've got plenty of room here .... He could even have his own RC room

Unless of course

I was old school - when old school wasn't cool !

Retro rc
Approved Member
Posts: 440
Joined: Sat Apr 04, 2015 10:10 am
Location: Auckland New Zealand
Has thanked: 437 times
Been thanked: 300 times

Re: So what did you get in the post today ???

Post by Retro rc »

Some more Schumacher goodness😱

D65B8A9B-3C19-4D70-AF6F-6E3D45AAF1C8.jpeg

User avatar
Incredible_Serious
Approved Member
Posts: 3235
Joined: Tue Jan 29, 2008 5:09 am
Location: Melbourne, Victoria, Australia
Has thanked: 1079 times
Been thanked: 651 times

Re: So what did you get in the post today ???

Post by Incredible_Serious »

Postman has been again.... more future projects being delivered.

This time it's a Tamiya TT01 with a carbon fibre 3Racing chassis upgrade, amongst other things. Carbon fibre top and bottom chassis, bumper hold-down, and also has a rear CF tower stiffener. Plus, alloy prop shaft, alloy motor mount, oil shocks, rear universals, rear locked diff, and red alloy rear end (upper and lower arms and hubs).
20221114_131001.jpg
20221114_131013.jpg
20221114_131031.jpg
20221114_131037.jpg
Little bit of damage up front, and a missing dog bone and a few other parts, but not too bad. Condition is definitely runner, but still quite nice. This will go to the project table with my other 3Racing carbon TT01, and I'll hopefully bust them both out over the Christmas holidays.

Alex
Osiris is the key.

"The world looks so much better through beer goggles... except Farmer in his underwear" - Ken

Look out for Todd K. - he's a convicted serial killer!!!

User avatar
R6cowboy
Super Member
Posts: 864
Joined: Thu Oct 18, 2018 5:06 pm
Location: Mendota, IL
Has thanked: 411 times
Been thanked: 408 times

Re: So what did you get in the post today ???

Post by R6cowboy »

Been wanting to get a vintage Traxxas for a while, either a Blue Eagle, Eagle LS, LS-II, Hawk 2 or TRX-T Eagle. But came across this SRT and decided it'll do for my one vintage Traxxas desires. Not sure what body is on it, but it needs a repo of the original LS-II/SRT body.
Resized_20221114_081432_4020.jpeg
Resized_20221114_081348_4758.jpeg

Pretty motor plate for the XXX-T.
Resized_20221114_081322_289.jpeg
-Jerry-

User avatar
R6cowboy
Super Member
Posts: 864
Joined: Thu Oct 18, 2018 5:06 pm
Location: Mendota, IL
Has thanked: 411 times
Been thanked: 408 times

Re: So what did you get in the post today ???

Post by R6cowboy »

Big thanks to Frankentruck for his 3d modeling expertise and designing various versions of the Futaba FXT battery strap to accommodate 7-cell NiMH batteries, and Jeff at Factory Works (GoMachV) for making the repo fiberglass straps. These two are nothing less than first-class guys.
Resized_20221114_132246_7489.jpeg

And the Schumacher Cougar Classic arrived.
Resized_20221114_140046_9114.jpeg
-Jerry-

1911Colt
Approved Member
Posts: 434
Joined: Fri May 06, 2022 1:11 pm
Has thanked: 432 times
Been thanked: 238 times

Re: So what did you get in the post today ???

Post by 1911Colt »

R6cowboy wrote: Mon Nov 14, 2022 8:18 pm And the Schumacher Cougar Classic arrived.
Resized_20221114_140046_9114.jpeg
Mine are supposed to be on the porch now... :D

User avatar
R6cowboy
Super Member
Posts: 864
Joined: Thu Oct 18, 2018 5:06 pm
Location: Mendota, IL
Has thanked: 411 times
Been thanked: 408 times

Re: So what did you get in the post today ???

Post by R6cowboy »

3D printed FXT wheels (next to originals) and other bits, plus a bonus 82 crystal. RC10 parts for RC10T to RC10 buggy conversion.

Resized_20221114_170338_3994.jpeg
Resized_20221114_170639_9699.jpeg
-Jerry-

User avatar
Lavigna
Approved Member
Posts: 1218
Joined: Wed Aug 05, 2015 8:24 am
Location: Petaluma, CA
Has thanked: 663 times
Been thanked: 918 times

Re: So what did you get in the post today ???

Post by Lavigna »

Apparently the last 2 pairs available from Stormer.
Attachments
20221110_181303.jpg

User avatar
JK Racing
Approved Member
Posts: 4587
Joined: Thu Jul 19, 2007 6:32 pm
Location: Placentia, CA
Has thanked: 93 times
Been thanked: 180 times

Re: So what did you get in the post today ???

Post by JK Racing »

Lavigna wrote: Tue Nov 15, 2022 5:34 am Apparently the last 2 pairs available from Stormer.
Awesome, one for you, one for me :)
--Joey --
Vintage A&L and Factory Works
Old School Racer & Vintage RC Car nut
JKRacingRC.com

User avatar
RC10th
Approved Member
Posts: 3998
Joined: Sat Feb 16, 2013 2:51 pm
Location: Australia
Has thanked: 26 times
Been thanked: 672 times

Re: So what did you get in the post today ???

Post by RC10th »

R6cowboy wrote: Mon Nov 14, 2022 3:04 pm Been wanting to get a vintage Traxxas for a while, either a Blue Eagle, Eagle LS, LS-II, Hawk 2 or TRX-T Eagle. But came across this SRT and decided it'll do for my one vintage Traxxas desires. Not sure what body is on it, but it needs a repo of the original LS-II/SRT body.
Resized_20221114_081432_4020.jpegResized_20221114_081348_4758.jpeg


Pretty motor plate for the XXX-T.
Resized_20221114_081322_289.jpeg
I watched this truck on ebay, they don't pop up very often. Glad to see someone here bought it.
I was old school - when old school wasn't cool !

User avatar
Diamond Dave
Approved Member
Posts: 1483
Joined: Tue Nov 29, 2011 6:42 am
Location: Calgary
Has thanked: 496 times
Been thanked: 81 times

Re: So what did you get in the post today ???

Post by Diamond Dave »

Stormer is great, what a fantastic guy.

I have ordered parts from him for years now, Bob is fantastic.

User avatar
R6cowboy
Super Member
Posts: 864
Joined: Thu Oct 18, 2018 5:06 pm
Location: Mendota, IL
Has thanked: 411 times
Been thanked: 408 times

Re: So what did you get in the post today ???

Post by R6cowboy »

RC10th wrote: Tue Nov 15, 2022 5:56 am I watched this truck on ebay, they don't pop up very often. Glad to see someone here bought it.
I couldn't believe I was the only one to bid on it.
-Jerry-

User avatar
juicedcoupe
Super Member
Posts: 2713
Joined: Sun Aug 16, 2020 8:05 pm
Location: Pascagoula, MS
Has thanked: 217 times
Been thanked: 1505 times

Re: So what did you get in the post today ???

Post by juicedcoupe »

R6cowboy wrote: Fri Nov 11, 2022 10:26 pm Steering knuckles and pinions for the FXT.
Just a FYI.

If you just need the metal part of the uprights, you can swap them out with the axles from those of much cheaper Lunchbox uprights.

I had some with lots of wear from bushings. So I bought some Lunchbox uprights for $3 and pressed the axles with a vise and deep well socket.
Always looking for new and interesting ways to waste money.

User avatar
R6cowboy
Super Member
Posts: 864
Joined: Thu Oct 18, 2018 5:06 pm
Location: Mendota, IL
Has thanked: 411 times
Been thanked: 408 times

Re: So what did you get in the post today ???

Post by R6cowboy »

juicedcoupe wrote: Tue Nov 15, 2022 7:27 pm Just a FYI.

If you just need the metal part of the uprights, you can swap them out with the axles from those of much cheaper Lunchbox uprights.

I had some with lots of wear from bushings. So I bought some Lunchbox uprights for $3 and pressed the axles with a vise and deep well socket.
I have a FXT that's missing the front C-hubs and steering knuckles. But good info regardless. Thanks
-Jerry-

User avatar
Frankentruck
Super Member
Posts: 1838
Joined: Fri Feb 19, 2021 2:59 pm
Location: Texas, USA
Has thanked: 997 times
Been thanked: 1094 times

Re: So what did you get in the post today ???

Post by Frankentruck »

There's 3 motors I'm hunting for to sort of complete (🤣 maybe) my collection but came across a couple of other nice additions while in the hunt.
.
PXL_20221117_142309905.jpg
Frankensteined RC10T3 / Franky Jr RC10GT-e (x2) / A+ stamp / Toy Story RC / Graphite replica / B1.5 BFG 5LTi / Clonewald / Hyper Hornet

"I love the effort, but it sure looks like you took the long way around to a tub again"

  • Similar Topics
    Replies
    Views
    Last post
  • What was the first post on RC10Talk, or best post ever?
    by marlo » » in Off-Topic / Chit-Chat
    7 Replies
    3136 Views
    Last post by EvolutionRevolution
  • So, what did you do RC today?
    by morrisey0 » » in R/C Off-Topic / Chit-Chat
    524 Replies
    19189 Views
    Last post by knixdad
  • Today in LA
    by RichieRich » » in Off-Topic / Chit-Chat
    17 Replies
    1256 Views
    Last post by Lowgear
  • what i did today!
    by asashaw » » in Off-Topic / Chit-Chat
    2 Replies
    640 Views
    Last post by Dr. Robotnik
  • Look What I got today
    by aconsola » » in RC10 Buggy Forum
    9 Replies
    1102 Views
    Last post by Synergy
  • Look what I got today
    by RC104ever » » in Tamiya Forum
    3 Replies
    1484 Views
    Last post by ireg
  • Went to my first race today.
    by twinrider1 » » in Off-Topic / Chit-Chat
    6 Replies
    2252 Views
    Last post by ca-rj
  • 20% off at Shapeways today
    by mk-Zero » » in Off-Topic / Chit-Chat
    0 Replies
    2845 Views
    Last post by mk-Zero

Return to “R/C Off-Topic / Chit-Chat”

Who is online

Users browsing this forum: No User AvatarCommonCrawl [Bot] and 1 guest