So what did you get in the post today ???

[coxbros1]

U got the ball diff grease!!!

Indeed, as recommended.

Test it, let me know what think...I can handle any response!

[klavy69]

and a RC10GT blue pan chassis in fairly good shape. Deanodizing and some sanding will make this a good start for a build project.

just outta curiosity what you building with that first generation rtr chassis?

[XLR8]

Al'-u-mini'-um wheels for the 934 project.

Apparently, according to the instructions, a couple of them are "Wilde".

They're a bit lighter than I expected. ... not nearly as light as Tamiya's plastic wheels however.

[MarkyDents]

Dem wheels sure are purrty

[R6cowboy]

Received a little unexpected surprised in the post today. Very cool.

[R6cowboy]

Novak Havoc Pro SC and Trinity Monster Horsepower.

[juicedcoupe]

Got this cheap motor lot.

Three Yokomo outlaw stocks (32°, SP can). One is obviously a Bud's motor and another looks to have the green and chrome Associated/Reedy label.

Kyosho 24° Roar stock.

Two Trinity Speedworks budget mods. 24X1 Dirt Oval and 25X1 Super Speedway.

MRP Wizzard marine. It's a Mabuuchi but it has the aluminum bushing carrier. While I'm sure they were common, I've only seen a couple with the aluminum carrier.

[Frankentruck]

"Bark bark dad what did you get? Oh no, it's a box full of Penguins!!!"
.

.

[romulus22]

Today was a good day.

[juicedcoupe]

Today was a good day.

Now that song is stuck in my head.

https://youtu.be/h4UqMyldS7Q

[Elkcycles]

I received an Option House torque limiting clutch.

Then came a Raider that I made a low offer on.

The Raider contained a little surprise.

[coxbros1]

Today was a good day.

B178986C-E603-4DC4-837E-60C623CCDF17.jpeg

I will need a few of those headers/manifolds!...I will get with u on my address...thanks!

[coxbros1]

I received an Option House torque limiting clutch.
Screenshot_20230407-210526_Gallery.jpg

Then came a Raider that I made a low offer on.
Screenshot_20230407-210553_Gallery.jpg

The Raider contained a little surprise.

That Raider came with, what in my opinion is the single handle best motor ever made!...480Spa!

[Phin]

"Buried treasure" lot of 40+ year old NOS & used 1/8 scale parts from a poorly listed auction. Parts from Thorp, K&B, McCoy, MRP and OPS. Also what I think is a Walbro carb for 1/4 scale car.

[coxbros1]

The Factory Works parts are new custom parts Jeff is working on for the 834B...gonna put on my Gil Losi Jr. piece...it allows a supper loose "floating " chain setup for a free drivtrain....the 480spa came from Elkcycles just a few posts up from this one...it came in his Raider...I haven't touched the motor except remove the capacitors/wires...I put it on my Shinwa Motor dresser...23,000rpm at 1.75 amps 7.2v....I did have to bump the timing to 4 degrees....what a nice score! I love it!...thanks Elkcycles...it's going in our Optima Pro