Picked this up a while back thinking it would make a good project. The chassis was near perfect so I didn't do anything besides strip and anno it gold. The parts were painted black, i stripped them and dyed them properly. Very happy with the color...
Last post
Wes, you made a huge mistake coming here :mrgreen: prepare for madness!
You should snap a few pics of your old race truck, if you need help posting em let me know. We have a lot of racers around here 8)
My rc10 brushless project i designed and mare a mount out of flat aluminum it drives amasing ! Im goin to run carpet indoor oval and maybe offroad it all depends if i can get a setup that works ok both ways
Last post
Customworks RC makes one for their older DD cars that is machined, in case your formed one fails :wink:
And it will work with the laydown gt trans? I have a cw rocket and it uses the old style stealth T/B3 actually and they mount diffrent.... One...
I got this RC10GT way back when I was a teenager. Probably around 1998 or so. I bought it without an engine, so for one summer me and a friend ran it on a worn-out old OS engine he had. I fondly remember driving the hell out of this thing. Starting...
Last post
I got my RPM rear arm mounts in today so I got those dropped in the truck. And as I did I was sitting there flexing the rear end and even though it was a lot better with the addition of the aft engine mount/chassis stiffener, I still wasn't happy...
I've owned a Gold pan RC10 and RC10L since the mid 80's and now that that kid is old enough to move up from lame toy store trucks I went back to what I know.
I picked up a RC10GT off CL with an old AM Futaba and bad...
Last post
This pan is about .075 thick on the bottom and .050 on the side walls.
If I make another it will have an extra layer of biaxial in the floor.. It should come out at 0.100 thick. I have a plan to make another with the SC10 wheelbase.
I may have access to one of these that is in really good condition but I doubt the engine is usable. It seems that this chassis shape would hinder an E-conversion. But I also have a spare RC10 original buggy chassis. Does it make sense to combine...
Last post
this is my solution to e-gt and flex in the chassis. no new holes, the lower part of the waterfall picks up the motor mount holes.
I have shared some photos of this in another thread years ago, but since then I've done more work to it. This is my RC10GT blue chassis I bought new like 20 years ago.
I converted it to a mid-motor, transverse battery electric
The motor bolts to...
Last post
Hi
Thanks for posting that chart I was looking for something like that. I'm also building a E-GT and almost done, just need some electrics and to paint the body.
I am restoring my flat chassis GT and decided to go with the front end parts from the B4.2 so I can use hex adapters . I ordered RPM wheels for the electric Rustler and combined with the hex adapters from the B4 on the rear , there was barely axle...