Hello, I just bouhgt a new build Worlds Edition with the first stealth tranny, I has the moderm rear axles to run the B4 rear wheels, can I run the B4 front rims with the original setup?
Also, the original stealth ttranny case... could I pop a current tranny into it, and run the newer slipper setup? The bearings are the same size, has anyone done this?
scr8p wrote:first off, i'm trying to figure out why you'd want to change, and run, a new built worlds car.
but anyways..........
b4 wheels will work on the front of the old rc10's. but they will narrow up the track width a bit.
you can put a complete b4 topshaft, slipper, and spur gear in the original 2.25 stealth.
I'm with scr8p, I don't think I would be changing anything on a new build worlds car let alone drive it!!! Thats a valuable car if it is in-fact a worlds car. Can we get some pics before you scratch it all up? I have a worlds car that was in terrable shape that I restored and I think I would cry if I ever scratched the chassis!
as long as your cars have the correct buggy suspension parts, here's what to get:
duratrax bx front rims and nitro rear rims. they're 2.2's, so modern tires will fit.
then, get a set of mip b2 cvd's.
4 of these bearings for the rear hub...
Last post
Hello . Well I guess these days 2.2 hex wheels are the new modern . This is my RC10 Conversion and comparison to a B5M. The shapeways arms seem to be duarable took couple hard hits and nothing broke (yet) . :D
Front - B4 20 degree caster blocks ....
So I have managed to sell enough of my old stuff to finance new electronics. LIpo, charger, Esc, and motor.
But I haven't raised the funds for a new car yet.
So I am going to build my Graphite into a capable race machine. :)
The before picture:...
Last post
Well the buggy is almost ready. Forgot to take pictures during the process so no build pics.
I added custom side rails to allow for a shorty lipo with about 3/4 adjustment front to back. Custom battery hold down using stainless steel bolts, plastic...
i have a graphite edition rc10 and a gold pan rc10 that im looking to get running and i was wondering what to do for the wheels. i have the originals but they arent in the greatest condition. i would like to run modern wheels for a b4 (or any other...
Last post
Thanks for the links. Definitely some good ideas and inspiration in there. I can't wait to get mine looking as god as some of the ones in that first link.
Not the first time someone has done this but I had this project planed out for at least 3 years now. Mike did it on his Ultima and I thought I would try it for this RC10. The challenge was to make the front work with BB like a standard wheel. I...
Last post
Fantastic! Definitely going to give it a shot. Thanks for clearing that up.
I have never had a Associated truck before, but have been aimlessly going through the truck forum for some research. This might be a simple question that probably has been answered already, but has anyone converted a vintage...
Last post
I ended up using the Rc10T CVD bones and the new quick connects for the T4. Works absolutely awesome!!!