rc 10 gold pan info
rc 10 gold pan info
Hi, I'm new here and fairly new in the hobby. I picked this creampuff up last week at a craiglist garage sale and I need some info. I think it's an mid or late '80's Edingers RC 10 from some research but I'm not sure. It has the white opaque plastic, I was told it was the original motor, has a futaba receiver and novak speed control. I'd like to restore it back to a buggy if possible. Where can I get parts for her? You guys are the experts and I sure would appreciate any help. It runs and drives but sometimes just takes off after letting off the throttle trigger on the futaba magnum junior radio, that came with it. Any help would be greatly appreciated. Here's some pics.
Thank you,
Gary
Thank you,
Gary
- Attachments
-
- rc106.jpg (51.44 KiB) Viewed 2191 times
- rc106.jpg (51.44 KiB) Viewed 2191 times
-
- rc105.jpg (48.99 KiB) Viewed 2191 times
- rc105.jpg (48.99 KiB) Viewed 2191 times
-
- rc104.jpg (55.75 KiB) Viewed 2191 times
- rc104.jpg (55.75 KiB) Viewed 2191 times
-
- rc103.jpg (54.39 KiB) Viewed 2179 times
- rc103.jpg (54.39 KiB) Viewed 2179 times
-
- rc102.jpg (41.28 KiB) Viewed 2186 times
- rc102.jpg (41.28 KiB) Viewed 2186 times
-
- rc101.jpg (60.91 KiB) Viewed 2189 times
- rc101.jpg (60.91 KiB) Viewed 2189 times
Re: rc 10 gold pan info
Nice car! As far as dating it, I'm not the one to help, I've been proven wrong too many times. Your glitching problem could be a lot of things... motor brushes could be very worn, the crystals or the reciever could be going bad or you might need capacitors on the motor, if any of the motor or battery connectors are loose that could contribute to it. If you want to run it I would invest in a modern radio, the speed control will probably work just fine for stock motors though. It looks really good though
Mark
Aaaaahhhh crap! I'm about to get passed by that orange truck!
Aaaaahhhh crap! I'm about to get passed by that orange truck!
- scr8p
- Administrator
- Posts: 16540
- Joined: Tue Feb 07, 2006 9:46 pm
- Location: Northampton, PA
- Has thanked: 28 times
- Been thanked: 976 times
Re: rc 10 gold pan info
that's just a run of the mill 6 gear rc10 (not an edinger). looks like it has some aluminum rims, too.
- aeiou
- Approved Member
- Posts: 1071
- Joined: Fri Apr 13, 2007 4:04 pm
- Location: Atlanta, GA
- Been thanked: 1 time
Re: rc 10 gold pan info
Welcome – nice looking rig.
For original parts, your best bet is eBay. It looks like all you’ll need to turn it back into a buggy are wheels, tires, battery strap, gear cover and an antenna mount. Oh, and maybe a body and wing. Those are still available new, though.
As to your issue with the car taking off on its own, it could be an issue with some of the components, but there are things I’d try first. In addition to the suggestions from markt311, you’ll want to rethink the location of those electronics. You don’t want the speed control sitting on top of the servo nor do you want the antenna wire hanging down like that. If you search around here, you’ll find plenty of examples of successful electronics placement.
Good luck!
For original parts, your best bet is eBay. It looks like all you’ll need to turn it back into a buggy are wheels, tires, battery strap, gear cover and an antenna mount. Oh, and maybe a body and wing. Those are still available new, though.
As to your issue with the car taking off on its own, it could be an issue with some of the components, but there are things I’d try first. In addition to the suggestions from markt311, you’ll want to rethink the location of those electronics. You don’t want the speed control sitting on top of the servo nor do you want the antenna wire hanging down like that. If you search around here, you’ll find plenty of examples of successful electronics placement.
Good luck!
- Asso_man!
- Approved Member
- Posts: 3959
- Joined: Thu Aug 03, 2006 7:49 am
- Location: EU
- Has thanked: 40 times
- Been thanked: 70 times
Re: rc 10 gold pan info
First of all, welcome aboard!
Here are some pieces of advice:
1) take off those 2 awful Tamiya plugs between the speedo and the motor and sold directly you motor wires to the motor plugs
2) place your speedo on the left side of the battery
3) place your rx to the right of the battery
4) use capacitors on your motor
5) after these steps, take of your motor gear and try your motor and servo on a table and see if everything is running smooth.
6) if the problems continue, you might have an old transmitter that is no more matching the rx frequence, then buy a new transmitter set or try to bring it to your LHS, some might be able to fine tune the frequency. You might also want to check the system without the motor connected or without the servo connected to deduce what is wrong. Check if your rx antenna is not broken or cut...
Good luck!
Here are some pieces of advice:
1) take off those 2 awful Tamiya plugs between the speedo and the motor and sold directly you motor wires to the motor plugs
2) place your speedo on the left side of the battery
3) place your rx to the right of the battery
4) use capacitors on your motor
5) after these steps, take of your motor gear and try your motor and servo on a table and see if everything is running smooth.
6) if the problems continue, you might have an old transmitter that is no more matching the rx frequence, then buy a new transmitter set or try to bring it to your LHS, some might be able to fine tune the frequency. You might also want to check the system without the motor connected or without the servo connected to deduce what is wrong. Check if your rx antenna is not broken or cut...
Good luck!
_____________________________________________
_____________________________________________
Come and visit the stable
_____________________________________________
Come and visit the stable
Re: rc 10 gold pan info
Hello all, and thanks for all the good advice. I am going to relocate all the electronics as suggested and get rid of the Tamaya plug. I was going to do that especially with the receiver. I saw some pics here that will help. It does have aluminum wheels. It came with a Ford truck body. The truck does have a broken right steering arm (knuckle) so if anyone has one they could spare I'll buy it from you. Here's a pic of the bottom of the pan and the body. Thanks again to everyone who replied and this is a great site!
Gary
Gary
- Attachments
-
- rc108.jpg (57.55 KiB) Viewed 2060 times
- rc108.jpg (57.55 KiB) Viewed 2060 times
-
- rc107.jpg (52.46 KiB) Viewed 2057 times
- rc107.jpg (52.46 KiB) Viewed 2057 times
Re: rc 10 gold pan info
That chassis looks pretty clean underneath...you might want to bash something else around.....
- RC10resto
- Super Member
- Posts: 2947
- Joined: Tue Sep 09, 2008 2:26 am
- Location: Los Angeles, CA
- Has thanked: 1145 times
- Been thanked: 442 times
Re: rc 10 gold pan info
Your gold chassis looks way too clean to be run.........................................just my opinion
Turn that car into a proper buggy, buy a parts car off ebay and do a swap - then you can have a shelfer and a runner.
Or you can sell that chassis to me and I will send you a lightly used chassis and some cash
Turn that car into a proper buggy, buy a parts car off ebay and do a swap - then you can have a shelfer and a runner.
Or you can sell that chassis to me and I will send you a lightly used chassis and some cash
- slotcarrod
- Approved Member
- Posts: 4415
- Joined: Tue Nov 25, 2008 10:57 pm
- Location: Calgary Alberta Canada
- Has thanked: 1 time
- Been thanked: 41 times
Re: rc 10 gold pan info
Don't bash that mint looking chassis!
Rod Littau
Slotcarrod's Rumpus Room: http://www.rc10talk.com/viewtopic.php?f=77&t=16113
25 Years of the RC10: http://www.rc10talk.com/viewtopic.php?f=35&t=13059
Slotcarrod's Rumpus Room: http://www.rc10talk.com/viewtopic.php?f=77&t=16113
25 Years of the RC10: http://www.rc10talk.com/viewtopic.php?f=35&t=13059
Re: rc 10 gold pan info
Well I guess after I clean up that electronic mess and resolder I'll disassemble everything and clean it in detail, put it back together and shelf it, will also look for some tires and wheels and a buggy body for it. I need a battery strap and the steering arm to make it complete as far as I know. Then I'll find another one I can bash. These old RC 10's seem a little addicting to me
Gary
Gary
- longboardnj
- Approved Member
- Posts: 1337
- Joined: Sun Jun 29, 2008 11:52 am
- Location: new jersey
- Been thanked: 2 times
Re: rc 10 gold pan info
wow great rc10 !! looks too nice to run. id keep it like it is (as a truck) shelf it (up on blocks so the tires dont get flat spots). if you want a buggy to run go to ebay. as for your problem runing and it takin off... is it takin off after the battery is being used ?? i had a speed controler like yours and if the battery started to get a little low the car would just take off (junked it and got a new one)..what i would do is buy an rc10 ready to run on ebay . if you want you use the electronics in the new car to problem solve the truck. plus all the post here have good info you can try..good luck
Re: rc 10 gold pan info
Hi, thanks for the kind words,yes I thought about the low battery thing and thought that may have been it. I removed the electronics today and got rid of that tamiya plug and ran the motor afterward and it seemed just fine. I wound up getting an old gold pan buggy off eBay the other night, I got off work and had a libation or 2 and decided to buy this, probably paid too much, but I thought I could bash this one and have some fun.longboardnj wrote:wow great rc10 !! looks too nice to run. id keep it like it is (as a truck) shelf it (up on blocks so the tires dont get flat spots). if you want a buggy to run go to ebay. as for your problem runing and it takin off... is it takin off after the battery is being used ?? i had a speed controler like yours and if the battery started to get a little low the car would just take off (junked it and got a new one)..what i would do is buy an rc10 ready to run on ebay . if you want you use the electronics in the new car to problem solve the truck. plus all the post here have good info you can try..good luck
http://cgi.ebay.com/Vintage-Team-Associated-RC-10_W0QQitemZ320336237606QQcmdZViewItemQQptZRadio_Control_Vehicles?hash=item320336237606&_trksid=p3286.c0.m14&_trkparms=66%3A2%7C65%3A13%7C39%3A1%7C240%3A1318
Gary
- blown5.0
- Approved Member
- Posts: 170
- Joined: Thu May 22, 2008 10:49 am
- Location: Michigan
- Has thanked: 1 time
Re: rc 10 gold pan info
I would definitely vote to leave it with the truck conversion and put it on the shelf, way too nice to run and get all scratched up or break.
- longboardnj
- Approved Member
- Posts: 1337
- Joined: Sun Jun 29, 2008 11:52 am
- Location: new jersey
- Been thanked: 2 times
Re: rc 10 gold pan info
i think its a good deal.. theres a whole car there.. every time i buy something like that i just think of the times ive spent more in one nite in new york city and i feel good about it
Re: rc 10 gold pan info
Hi again, thanks to all for your help and comments. One more question for now. How do I put or use capacitors on the motor?Asso_man! wrote:First of all, welcome aboard!
Here are some pieces of advice:
1) take off those 2 awful Tamiya plugs between the speedo and the motor and sold directly you motor wires to the motor plugs
2) place your speedo on the left side of the battery
3) place your rx to the right of the battery
4) use capacitors on your motor
5) after these steps, take of your motor gear and try your motor and servo on a table and see if everything is running smooth.
6) if the problems continue, you might have an old transmitter that is no more matching the rx frequence, then buy a new transmitter set or try to bring it to your LHS, some might be able to fine tune the frequency. You might also want to check the system without the motor connected or without the servo connected to deduce what is wrong. Check if your rx antenna is not broken or cut...
Good luck!
Gary
Create an account or sign in to join the discussion
You need to be a member in order to post a reply
Create an account
Not a member? register to join our community
Members can start their own topics & subscribe to topics
It’s free and only takes a minute
Sign in
-
- Similar Topics
- Replies
- Views
- Last post
-
- 3 Replies
- 969 Views
-
Last post by DarthRacer
-
- 31 Replies
- 3751 Views
-
Last post by Sixtysixdeuce
-
- 1 Replies
- 949 Views
-
Last post by marty slater
-
- 71 Replies
- 5962 Views
-
Last post by 250r
-
- 1 Replies
- 512 Views
-
Last post by bscotti
-
- 6 Replies
- 1159 Views
-
Last post by Marty
-
- 15 Replies
- 1736 Views
-
Last post by rc10absuer
-
- 8 Replies
- 815 Views
-
Last post by RedScampi
Who is online
Users browsing this forum: Bing [Bot] and 46 guests