My still virginal RC12i/S. Spring kingpins, rear ride height adjuster, differential version, circa 1983. Kit 4016, which came with AE 05 "stock" motor and Sanyo 1200SCR battery. They're sitting in my 12e...
Attachments
Not pictured are the motor, battery, TOJ body and 3181 driver.
rc12i1.jpg (79.51 KiB) Viewed 1661 times
Not pictured are the motor, battery, TOJ body and 3181 driver.
The Delta Super phaser arrived. It is pretty cool. The red is overspray, and seems to be regular old enamel. No match for our good friend Mr. Acetone.
I'll guess this might clean up real nice. I also came with a clean but painted Zakspeed Mustang IMSA body, not sure if I'm too excited about it, but it's one less body to paint...
Attachments
Dipped, sprayed, zapped, lubed...whew! This is from when Trinity was still in Brooklyn... and Team Losi didn't exist...
stock1.jpg (85.16 KiB) Viewed 1620 times
Dipped, sprayed, zapped, lubed...whew! This is from when Trinity was still in Brooklyn... and Team Losi didn't exist...
stock1.jpg (85.16 KiB) Viewed 1620 times
Beautiful, supple foams. Trinity and Associated Igarashis.
goodies.jpg (70.67 KiB) Viewed 1622 times
Beautiful, supple foams. Trinity and Associated Igarashis.
goodies.jpg (70.67 KiB) Viewed 1622 times
A little bath in acetone is in order here.
phase5.jpg (90.88 KiB) Viewed 1622 times
A little bath in acetone is in order here.
phase5.jpg (90.88 KiB) Viewed 1622 times
Yup, an Igarashi Team Checkpoint stock 05 motor. How cool is that?
phase4.jpg (99.04 KiB) Viewed 1623 times
Yup, an Igarashi Team Checkpoint stock 05 motor. How cool is that?
phase4.jpg (99.04 KiB) Viewed 1623 times
Not one scratch on the bottom, the screws are really funny, the slots fit a nickel perfectly. Maybe there's some special "micro dzus" tool for these?
phase3.jpg (65.82 KiB) Viewed 1622 times
Not one scratch on the bottom, the screws are really funny, the slots fit a nickel perfectly. Maybe there's some special "micro dzus" tool for these?
phase3.jpg (65.82 KiB) Viewed 1622 times
phase2.jpg (72.2 KiB) Viewed 1622 times
phase2.jpg (72.2 KiB) Viewed 1622 times
phase1.jpg (77.99 KiB) Viewed 1622 times
phase1.jpg (77.99 KiB) Viewed 1622 times
Doesn't really blow my skirt up, but seems to be period correct...
9556_12.jpg (26.04 KiB) Viewed 1625 times
Doesn't really blow my skirt up, but seems to be period correct...
Made some progress on the Delta thanks to some lucky ebaying. Delta (or TRC?) red wheels and another NES1A servo for the steering. Still need to do a complete disassembly, rebuild the shock, polish the alloy parts, etc. It does look pretty good now IMHO...
Just a FYI: replacing servo wiring harnesses isn't too difficult... this steering servo had a JR harness, I replaced it with a NOS Futaba G harness without much difficulty.