belt driven belt drive
-
- Approved Member
- Posts: 1116
- Joined: Tue Feb 05, 2008 6:37 pm
- Location: Donkin, Nova Scotia, Canada
- Has thanked: 7 times
- Been thanked: 42 times
Re: got my lazer out tonight
Paul, all the front belts for the Lazer series are the same length except for the ZX-S versions (not the sport version of the ZX-R, the later version before the ZX5 came out). As long as they`re actually Lazer belts, they should fit...
-
- Approved Member
- Posts: 617
- Joined: Mon Sep 22, 2008 5:09 am
- Location: Sweden
- Been thanked: 10 times
Re: got my lazer out tonight
you can also get them from beltcorp in us and minimum order is 20-25 dollars and i think that they where like 1 dollar each and kevlar reinforced.
mvh Isobarik
mvh Isobarik
-
- Approved Member
- Posts: 320
- Joined: Mon Nov 26, 2007 3:39 pm
Re: got my lazer out tonight
well i designed the first and now im trying to locate it as i sold it in weston super mare. Its one of a kind and no other was made like it. Higher side walls and six cell holes, and was designed due to Jason Green standing on my car whilst fighting for pole and he was marshalling. He broke my esc and was the reason why i designed the tub for protecting the electrics.isobarik wrote:Damn those tubs are super sexy.....and red belt...like looking at nice as* i an thong ....![]()
mvh isobarik
Also the buggies look sweet, hope you enjoy beating the newer cars
-
- Approved Member
- Posts: 1304
- Joined: Tue Dec 08, 2009 10:10 pm
- Location: seattle washington
Re: got my lazer out tonight
so i finnaly got back to some kyoshoing this week two days till midnight and i almost finished two chain drives and my zx lazer which is my favorite car i think i like it more than the cr version .
this zx came to me as broken the chassis was in good condition but it was (is still missing a rear arm ) and it took a big front end hit which took out the front gear case .
so i put some Ti buckles and fitted a one way slipper and a front ball diff Ti hinge mounts and a nice motor plate
Paul
this zx came to me as broken the chassis was in good condition but it was (is still missing a rear arm ) and it took a big front end hit which took out the front gear case .
so i put some Ti buckles and fitted a one way slipper and a front ball diff Ti hinge mounts and a nice motor plate
Paul
-
- Approved Member
- Posts: 1304
- Joined: Tue Dec 08, 2009 10:10 pm
- Location: seattle washington
-
- Approved Member
- Posts: 1304
- Joined: Tue Dec 08, 2009 10:10 pm
- Location: seattle washington
Re: one ZX down two to go
so i installed the electrics and put some rubber on them i bit the bullet and got the narrow fronts
not thinking about tires for now but i did get a original double wing from fire-boy he has been steadily dropping his price on them so TBG i have been dicking around with them to get the body i have the wing so i asked him for a deal on the tray and combine shipping so i got the deal and hit the pay now FULL PRICE i cant spend 20 bucks on shipping so i dont know whats going on i only started this zx cos he was producing the bods and mar-wan the decals i hope i dont get stuck without some cloths fir this beautiful car
oh and im on the hunt for the FRP towers (LAW1)
Paul

oh and im on the hunt for the FRP towers (LAW1)
Paul
-
- Approved Member
- Posts: 1304
- Joined: Tue Dec 08, 2009 10:10 pm
- Location: seattle washington
Re: one ZX down two to go
so this is the paint im going to do a nice box art pics are of a marwan car
Paul
Paul
-
- Approved Member
- Posts: 1304
- Joined: Tue Dec 08, 2009 10:10 pm
- Location: seattle washington
Re: one ZX down two to go
so im getting the run around with TBG i sent the email with the quote for the body and tray minus the crappy wing that comes with it saving 7 bucks and this is nearly a week after hitting the Bin and i got an email through eBay saying that TGB was declining to take my order for the tray but i could have the body so i declined the offer and said i didn't want one without the other . so who else is producing a zx shell and tray ...anyone
Paul
Paul
-
- Approved Member
- Posts: 1136
- Joined: Tue Jul 29, 2008 1:04 am
- Location: San Jose, Ca.
- Been thanked: 2 times
Re: one ZX down two to go
I've got your FRP towers. How many sets do you want? Thay are NIP btw. -Jeff
-
- Approved Member
- Posts: 1304
- Joined: Tue Dec 08, 2009 10:10 pm
- Location: seattle washington
Re: one ZX down two to go
i wish one stop shopping all packaged with decals mm ....no he was talking about it i will be getting the decals from him
i finally sorted out the TBG thing so i should have my new zx shell and tray here in a month or so
still cant get that canada US post thing i have held off the final trimming and fitting of the double wing untill the bod gets here
so im working on the towers im hopping to get another set for my sport it seems strange to put new platinum shocks on some alloy towers instead of CF
i finally sorted out the TBG thing so i should have my new zx shell and tray here in a month or so


so im working on the towers im hopping to get another set for my sport it seems strange to put new platinum shocks on some alloy towers instead of CF
-
- Approved Member
- Posts: 1304
- Joined: Tue Dec 08, 2009 10:10 pm
- Location: seattle washington
Re: one ZX down two to go
so these came today


we will see they seem alot thinner than i thought

[/img]


we will see they seem alot thinner than i thought

[/img]
-
- Approved Member
- Posts: 398
- Joined: Mon Feb 18, 2008 3:54 pm
- Location: toronto canada
- Been thanked: 1 time
Re: one ZX down two to go
i heard that about his body's hence the reason i buy from marwank.
2nd place is just the 1st loser
-
- Approved Member
- Posts: 1304
- Joined: Tue Dec 08, 2009 10:10 pm
- Location: seattle washington
Re: one ZX down two to go
bdrmbully wrote:i heard that about his body's hence the reason i buy from marwank.
well marwan has not produced the zx yet or i would have when he gets back from one of his many holidays



- GJW
- Approved Member
- Posts: 2325
- Joined: Mon Oct 15, 2007 7:22 pm
- Location: AUSTRALIA!!
- Been thanked: 1 time
Re: one ZX down two to go
bdrmbully wrote:i heard that about his body's hence the reason i buy from marwank.
marwank


Create an account or sign in to join the discussion
You need to be a member in order to post a reply
Create an account
Not a member? register to join our community
Members can start their own topics & subscribe to topics
It’s free and only takes a minute
Sign in
-
- Similar Topics
- Replies
- Views
- Last post
-
- 10 Replies
- 1420 Views
-
Last post by mrlexan
-
- 33 Replies
- 4148 Views
-
Last post by Kyoshojoe
-
- 11 Replies
- 2036 Views
-
Last post by JHarris
-
- 1 Replies
- 1322 Views
-
Last post by LaserRC10
-
- 3 Replies
- 1927 Views
-
Last post by blubblood
-
- 7 Replies
- 1770 Views
-
Last post by Danf1275
-
- 6 Replies
- 1425 Views
-
Last post by rc10johnny
-
- 1 Replies
- 785 Views
-
Last post by Marshky
Who is online
Users browsing this forum: No registered users and 7 guests