Egress re-release !
- RC104ever
- Approved Member
- Posts: 1506
- Joined: Sun May 22, 2011 11:34 am
- Location: Burlington, Ontario - Canada
- Been thanked: 8 times
Re: Egress re-release !
How do these actually drive? They look pretty nice.
- Chris
Lots of cars...so many cars
Lots of cars...so many cars
- knixdad
- Approved Member
- Posts: 396
- Joined: Thu Jun 06, 2013 3:48 pm
- Location: Califon, New Jersey
- Has thanked: 2 times
- Been thanked: 4 times
Re: Egress re-release !
RC104ever wrote:How do these actually drive? They look pretty nice.
Um, slightly better than the Avante? They can fare ok on a slightly undulating hard packed clay track. It isn't a Yokomo or a XX4.
I miss brushed motors in that hazy, everything seemed better when I was a kid, kind of way.
Re: Egress re-release !
there were some really fast/competitive avante's at the vonats this year. they suprised me.
- terry.sc
- Approved Member
- Posts: 892
- Joined: Wed Feb 07, 2007 4:58 pm
- Location: Stockport, UK
- Has thanked: 7 times
- Been thanked: 126 times
Re: Egress re-release !
So well that the UK Team drivers used prototype Manta Ray suspension on them until it was replaced a year later by this http://www.tamiyaclub.com/article.asp?id=64RC104ever wrote:How do these actually drive? They look pretty nice.
After saying that, they do go a lot better than Avantes.
Re: Egress re-release !
Nineteen page thread over on Tamiyaclub.
basic info..
re-release kit
box-art same as original
changes over original..
Revised design chassis plates - top plate has oval cut outs vs round on original, plus a few extra small screw holes (for driver figure or cable ties ???)
Vajra design ball diffs,outdrives and CVDs (improved design)
Avante 2001 rear trailing arm retaining brackets
Revised shock towers (thicker materials, taller/wider front)
front metal cross brace reversed
Re-re hi-cap dampers
Revised front shock lower mounting points (no BF8/BF9 brackets)
Gold strengthened front uprights
Revised steering linkage
No titanium screws
Revised decal font
Boxart appears to be as original, although suspect there will be no blister packaging inside.
basic info..
re-release kit
box-art same as original
changes over original..
Revised design chassis plates - top plate has oval cut outs vs round on original, plus a few extra small screw holes (for driver figure or cable ties ???)
Vajra design ball diffs,outdrives and CVDs (improved design)
Avante 2001 rear trailing arm retaining brackets
Revised shock towers (thicker materials, taller/wider front)
front metal cross brace reversed
Re-re hi-cap dampers
Revised front shock lower mounting points (no BF8/BF9 brackets)
Gold strengthened front uprights
Revised steering linkage
No titanium screws
Revised decal font
Boxart appears to be as original, although suspect there will be no blister packaging inside.
-
- Approved Member
- Posts: 1280
- Joined: Tue Dec 30, 2008 3:02 am
- Location: USA
- Been thanked: 81 times
Re: Egress re-release !
My all time favorite tamiya kit. Looks like have to start selling things to get the RC fund up .
http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXDXHM&P=7
http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXDXHM&P=7
- Coelacanth
- Approved Member
- Posts: 7421
- Joined: Thu Jul 29, 2010 6:20 pm
- Location: Alberta, Canada
- Has thanked: 16 times
- Been thanked: 325 times
Re: Egress re-release !
$560+??? 

Completed projects: CYANide Onroad Optima | Zebra Gold Optima | Barney Optima | OptiMutt RWD Mid
Gallery - Coel's Stalls: Marui Galaxy & Shogun Resto-Mods | FrankenBuff AYK Buffalo | 1987 Buick GNX RC12L3
Gallery - Coel's Stalls: Marui Galaxy & Shogun Resto-Mods | FrankenBuff AYK Buffalo | 1987 Buick GNX RC12L3
- knixdad
- Approved Member
- Posts: 396
- Joined: Thu Jun 06, 2013 3:48 pm
- Location: Califon, New Jersey
- Has thanked: 2 times
- Been thanked: 4 times
Re: Egress re-release !
Tamiya's MSRP is always out out of control.
I miss brushed motors in that hazy, everything seemed better when I was a kid, kind of way.
- flipwils11
- Approved Member
- Posts: 1905
- Joined: Sun Feb 14, 2010 10:30 pm
- Location: St Paul, MN
- Has thanked: 2 times
- Been thanked: 19 times
Re: Egress re-release !
Tower always inflates the preorder price on the Tamiya re-re's. After they come in stock it will drop.
RC10 Short Arm | Novak Tempest ESC | Tamiya Torque Tuned 25T | Savox 1258 | Stealth Trans w/ Exotek Slipper Eliminator (geared 24/81)
RC10B3 | HW Just Stock Club Spec | Reedy 13.5 | Savox 1258
RC10B3 | HW Just Stock Club Spec | Reedy 13.5 | Savox 1258
-
- Approved Member
- Posts: 361
- Joined: Wed Nov 12, 2008 9:03 pm
- Location: China
- Been thanked: 1 time
-
- Approved Member
- Posts: 115
- Joined: Sun Nov 21, 2010 2:43 pm
- Location: Shrewsbury PA
- Has thanked: 46 times
- Been thanked: 13 times
Re: Egress re-release !
Honestly, I wish you would write a book on racing Tamiya vehicles. Your post are very informative. It gives a good look into what racing with a Tamiya was really like back in the day minus all the rosy tint of nostalgia.
Create an account or sign in to join the discussion
You need to be a member in order to post a reply
Create an account
Not a member? register to join our community
Members can start their own topics & subscribe to topics
It’s free and only takes a minute
Sign in
-
- Similar Topics
- Replies
- Views
- Last post
-
- 7 Replies
- 1905 Views
-
Last post by Puffdogg
-
- 0 Replies
- 1057 Views
-
Last post by flustorm99
-
- 17 Replies
- 4299 Views
-
Last post by tamiyadan
-
- 0 Replies
- 1363 Views
-
Last post by Jirka
-
- 11 Replies
- 3573 Views
-
Last post by stickboy007
-
- 2 Replies
- 948 Views
-
Last post by tamiyadan
-
- 60 Replies
- 13935 Views
-
Last post by rangerg
-
- 22 Replies
- 4551 Views
-
Last post by TokyoProf
Who is online
Users browsing this forum: No registered users and 9 guests