Got the buggy back together with the thicker race arms, but I'm driving it like I'm walking on egg shells. Not fun if you expect a crash and a SNAP! I managed to get a pack in at the local off road track but funny enough, I snapped a MIP CVD! Never done that before on any type of RC10.
I also noticed the battery tray accumulated dirt, so I made two holes in the rear tray so dirt can exit. This was done on original Stealth cars as well.
1/10th scale 2wd practice nights are on Wednesdays at 6pm. Usually there's just a few guys there. I won't be running my NIX91 until I get the new front bulkhead that was just ordered.
I will have my B4 every Wendnesday, but can always bring the NIX91 (to show) and another RC10 to run for fun.
I'm planning Wednesday after 5pm at RC Gears. Will have my orange 10T, 91 and 93 Worlds there. Look forward to seeing you Dave! Anthony... not so much!
Did they get the track complete yet? I can't wait to get back out there with mine when I get back to town. It's looking to be about 4 weeks straight now
I ran on the track for over an hour and a half last night with no problems at all. People were saying it looks just as fast as my B5M and I should race it on Sunday. I think I might!
I knew you would come to your senses lol. When I drove mine on that track I loved it, but it didn't love getting hit by 1/8th scalers. I still need to order another front bulkhead and a B2 brace before I can run mine again though. I plan on running it until I can't, and with Jake back in action, that's going to be a while
Ok guys, I finally took the time to put my plans into action. My goal was to use the Nix91 platform as a foundation but retrofit some of the newer hardware from the B5. As much as I wanted to keep the Nix91 arms, they interfered too much with the...
Last post
Wow :shock: I missed this one.. What a sweet ride mate,looks great..
I hadn't planned on showing this until I had a complete roller....but since it's slow....
I decided to build this one as a what-if car. If they chose the stealth car platform and made it available, there would have likely been a champ and a team...
I am new to the forum even though I have been lurking around for a while. I used to race back in the 1980s and 1990s and the last car I had was a 2WD Losi XX. As many others of my generation, I was also very interested in the RC10 Stealth...
Last post
Thank you very much for the info and link. It is very helpful. I also went through the pinned RC10 Stealth Car thread and I think I am getting a better understanding of the components and work behind the Stealth Car. Would love to have one, but I am...
OK, its took me an age, waiting for a few bits and bobs was a pain, but i got there in the end with the basic roller. The wheel dots just lift off as there on magnetic sheet, so when i run it, i can just whip off the wheels and not keep having to...
Awhile back I built up a nix9200 chassis using my first real rc vehicle ( RC10 B3) that raced back in the late 90's,
here are both threads,
Nix concepts original concept.
My build up:
I can safely say that I have a soft spot for b2...
Last post
Not so much total arm length, but lengths between hinge pins and shock mounts.
The spaced out shock would put some side load on the shock as it travels through the suspensions arc.
Would be great to get it to mount up like a standard shock.
Okay, so probably jumping the gun with this thread.. but I feel compelled to post up a pic of some parts due to my overwhelming excitement. I'm sure some of you will recognize a few of these widgets... and then remember I posted this in the truck...