new graphite racer build to sprint DO

General discussion, builds/restorations, etc...

Moderators: scr8p, klavy69

User avatar
markt311
Approved Member
Posts: 1037
Joined: Thu Mar 06, 2008 10:59 am
Location: nashville TN

Re: new graphite racer build

Post by markt311 »

looking good, you gotta watch out for me too James! I ran a borrowed stock brushed motor (thanks Brandon) on Friday and it was plenty fast. Those B4's carry a lot more corner speed through the sweepers though. I need to do some minor suspension tuning on mine to get more on power steering. I almost think a rear sway bar would help at our track.
Mark

Aaaaahhhh crap! I'm about to get passed by that orange truck!

jsrracing
Approved Member
Posts: 101
Joined: Tue Aug 11, 2009 1:36 pm

Re: new graphite racer build

Post by jsrracing »

91 roar stock and 2010 roar stock :lol:
102_1705.JPG
i have every thing to run the team car

i dont have every thing for the brushless yet
just race it

User avatar
Brandon G
Approved Member
Posts: 2106
Joined: Mon Oct 01, 2007 4:23 pm
Location: Nashville, TN
Been thanked: 2 times

Re: new graphite racer build

Post by Brandon G »

James, I have your 17.5 BL motor. Possibly see you Saturday...

The team car looks good!

I see your green springs came in finally.

jsrracing
Approved Member
Posts: 101
Joined: Tue Aug 11, 2009 1:36 pm

Re: new graphite racer build

Post by jsrracing »

stock setup.JPG
ready to race

this is what i came up with after the 1.32 shocks . the 1.32 are to long and would not let the chassis bottom .
so i went with the shorter 1.08. perfect
1.08 shocks.JPG

o well no rear gold shocks

going to get a base line sat with a stock and a 19turn burshed
just race it

User avatar
Brandon G
Approved Member
Posts: 2106
Joined: Mon Oct 01, 2007 4:23 pm
Location: Nashville, TN
Been thanked: 2 times

Re: new graphite racer build

Post by Brandon G »

James, you better be doin some hobby lovin to that thing tonite, it's fixin to get broke in....
No more "new" smell.... 8)

I should be down at Thunder about 1pm. I will have your motor.

jsrracing
Approved Member
Posts: 101
Joined: Tue Aug 11, 2009 1:36 pm

Re: new graphite racer build

Post by jsrracing »

hey bring your cam for some pic (action shots )

might have to change this thread to TN vintage buggy racing :lol:

henslo should have his ready . my pimp slaping hand is all ready

never have ran 2 classes before but i dont want to leave the sct open class hanging .

i need to pick up a transponder and a reciver. im going to use the mag junior and a stock bmotor this weekend , marks was pretty fast with a stock bmotor
just race it

User avatar
Brandon G
Approved Member
Posts: 2106
Joined: Mon Oct 01, 2007 4:23 pm
Location: Nashville, TN
Been thanked: 2 times

Re: new graphite racer build

Post by Brandon G »

Henslo's ready? Excellent!

Do I need to bring some aluminum wheels with me like we talked about last weekend?

jsrracing
Approved Member
Posts: 101
Joined: Tue Aug 11, 2009 1:36 pm

Re: new graphite racer build

Post by jsrracing »

na its going to be pretty tight getting the runner up .

be a bit befor i return to the shelf queen
just race it

User avatar
markt311
Approved Member
Posts: 1037
Joined: Thu Mar 06, 2008 10:59 am
Location: nashville TN

Re: new graphite racer build

Post by markt311 »

I got my new racer in the mail yesterday, you'll like this one James. It's top secret for now though :wink:
Mark

Aaaaahhhh crap! I'm about to get passed by that orange truck!

jsrracing
Approved Member
Posts: 101
Joined: Tue Aug 11, 2009 1:36 pm

Re: new graphite racer build

Post by jsrracing »

10.5 Buggy
Round 1 Round 2 Round 3
Position Name # Laps Time Fast Lap-Time # Laps Time Fast Lap-Time # Laps Time Fast Lap-Time
1 cornbread 34 8:02.63 11-12.6 35 8:10.72 14-12.3 37 8:02.96 19-12.3
2 Scott Fuller 35 8:06.04 12-12.6 34 8:04.73 15-12.4 37 8:07.25 6-12.2
3 BRANDON GILES 35 8:11.33 31-12.8 31 8:03.62 31-12.8 37 8:08.94 13-12.4
4 james roberts 28 8:27.78 12-13.2 29 8:03.20 6-13.2 32 8:02.61 30-12.8
5 Ricky Jones 20 8:14.86 10-17.8 17 7:39.32 16-15.2 22 8:11.97 19-16.0

Last Updated: Oct 24, 2009 6:56:16 PM
all the details are here http://results.rc50.com/Thunder_RC_Nashville/10-24-2009/


not a bad night for first time out and first time to run 2 classes

the buggy was fast 12.8 fast lap . the fastest lap was a b4 with 12.2
brandon has his rc10 on point with a fast lap of 12.4 and was in it in the end .
Great Run

now to figure out how to get more on power steering
solve my wing problem ,change the reciver to my futaba 2.4
just race it

HENSLO
Regular Member
Posts: 19
Joined: Fri Oct 02, 2009 8:10 am

Re: new graphite racer build

Post by HENSLO »

No....Henslo is not ready.....gold tub undergoing a rebuild but it will be soon!
Thanks to Brandon Giles for finding a nice buggy....I will see you soon brother so we can square up!!
And no JSR's green springs did'nt come in......he stole/borrowed them off of my buggy! See if I let any of my racecars spend the night at his house again! :lol:

In the pits...broke again

jsrracing
Approved Member
Posts: 101
Joined: Tue Aug 11, 2009 1:36 pm

Re: new graphite racer build

Post by jsrracing »

busted on the springs .

mark i know your secret (hope you do a build/racer thread)


i have some work to do on mine


man it pushed like a pig exiting onto oval underpower. had really good turn in but seemed gittery. exit speed was insane with a 19turn brushed.

to help the push underpower? what will happen if i go to 0 rear blocks
to help the gittery ? may have been the feel of the brushed motor.
going to change the radio and speedo. will be using brushed til novak let there new spedo loose
just race it

User avatar
markt311
Approved Member
Posts: 1037
Joined: Thu Mar 06, 2008 10:59 am
Location: nashville TN

Re: new graphite racer build

Post by markt311 »

more rear camber, try 1.5 degrees negative.

I'm working on the new car, it's almost done so no build thread. Just have to get some small parts and some tires.

Hey, do you have a link for a place that sells the brushed motor you were running? I need a new motor or I have to wait to buy another brushless speed control.
Mark

Aaaaahhhh crap! I'm about to get passed by that orange truck!

Charlie don't surf
Approved Member
Posts: 8921
Joined: Tue Apr 08, 2008 2:44 pm
Location: USA
Been thanked: 8 times

Re: new graphite racer build

Post by Charlie don't surf »

jsrracing wrote:
now to figure out how to get more on power steering
what is your front toe in/out set up like?

jsrracing
Approved Member
Posts: 101
Joined: Tue Aug 11, 2009 1:36 pm

Re: new graphite racer build

Post by jsrracing »

plus 1 on the toe . hey thanks for stoping by charile.

hey mark, tower and stormer hobbies 19 turn single.

the 19 turn is a epic can that i got from mrd . its one of the 12 scale on road 19s i think .

im going to pick up one of the 19 turn doubles from tower and try it .
there about 20 bucks for the venom racing motors .
just race it

Post Reply

Create an account or sign in to join the discussion

You need to be a member in order to post a reply

Create an account

Not a member? register to join our community
Members can start their own topics & subscribe to topics
It’s free and only takes a minute

Register

Sign in

  • Similar Topics
    Replies
    Views
    Last post
  • RC10 Graphite Sprint car Those CW cars don't scare me!
    by D.DaLegend » » in RC10 Buggy Forum
    1 Replies
    480 Views
    Last post by adam lancia
  • CON2 MMS Graphite to Graphite RPM build.
    by CON2 » » in RC10 Buggy Forum
    7 Replies
    921 Views
    Last post by CON2
  • Sprint mish mash build
    by railey72 » » in RC10 Buggy Forum
    9 Replies
    838 Views
    Last post by rc10johnny
  • RC10 Graphite Ex Racer from Japan
    by Dual » » in RC10 Buggy Forum
    15 Replies
    3316 Views
    Last post by kenooze
  • graphite runner/racer project
    by ra272 » » in RC10 Buggy Forum
    14 Replies
    1765 Views
    Last post by Minicooper 35
  • Graphite Racer (Final Pictures added)
    by DMAT » » in RC10 Buggy Forum
    3 Replies
    856 Views
    Last post by marlo
  • Vintage Losi BBT Sprint Car build (Times Two)
    by xxx2fast4u » » in Losi Forum
    10 Replies
    2202 Views
    Last post by urpaldan
  • Graphite or pan chassis for resto mod racer?
    by Racinjason2316 » » in RC10 Buggy Forum
    18 Replies
    2103 Views
    Last post by fredswain

Return to “RC10 Buggy Forum”

Who is online

Users browsing this forum: No User AvatarGoogle Adsense [Bot] and 35 guests