front wheels bearings

Post by **FlyinGN** » Wed Mar 28, 2007 11:12 am

someone posted a link to a bearing supplier for the front wheels. They were cheap as heck.. $1 each.. Was it hoopty?? Can ya repost it? I can't find the thread:( Thanks

Post by **Eau Rouge** » Wed Mar 28, 2007 11:18 am

I highly recommend Avid R/C for all of your bearing needs. Fantastic race quality bearings and excellent service.

Post by **Brat** » Wed Mar 28, 2007 11:25 am

Now they do not have stock for the front and rear bearings for RC10...been waiting for the past two weeks to order mine. Now I'm stuck with my resto!

Post by **FlyinGN** » Wed Mar 28, 2007 11:28 am

that it. thanks . Now what size are the fronts????

Post by **shodog** » Wed Mar 28, 2007 11:40 am

ebay seller walawala sell bearings for the rc10.

Post by **Brat** » Wed Mar 28, 2007 11:52 am

FlyinGN wrote:that it. thanks . Now what size are the fronts????

Its 4pcs of 3/16 X 5/16 Flanged.

Post by **FlyinGN** » Wed Mar 28, 2007 12:08 pm

isn't it 3/16" x 3/8th??? I hope so cause I just bought a bunch:)

http://www.avidrc.com/?action=item&id=88&prevaction=search&previd=&prevstart=0

Post by **FlyinGN** » Wed Mar 28, 2007 12:15 pm

did a serach and come up with nothing on ebay from walawala

shodog wrote:ebay seller walawala sell bearings for the rc10.

Post by **scr8p** » Wed Mar 28, 2007 12:27 pm

it all depends on what rim your gonna use, as to what size bearing you need.

Post by **Brat** » Wed Mar 28, 2007 12:58 pm

Brat wrote:
FlyinGN wrote:that it. thanks . Now what size are the fronts????

Its 4pcs of 3/16 X 5/16 Flanged.

What I've mentioned are for the 3pieces original wheels....sorry

Post by **RichieRich** » Wed Mar 28, 2007 1:09 pm

Wow, never knew about Avid. I've used Boca Bearing in the past. They have a 99 cent bearing store plus free shipping if you spend over 12 bucks (I think).

http://www.bocabearings.com/main1.aspx?p=ws

Post by **shodog** » Wed Mar 28, 2007 1:13 pm

FlyinGN wrote:did a serach and come up with nothing on ebay from walawala

Here is a link http://search.stores.ebay.com/WalawalaStore_3-16x5-16_W0QQfcdZ2QQfciZ0QQfclZ3QQfromZR10QQfsnZWalawalaStoreQQfsooZ2QQfsopZ2QQftsZ2QQsaselZ69548135QQsatitleZ3Q2f16x5Q2f16QQsofpZ0

Post by **FlyinGN** » Wed Mar 28, 2007 1:18 pm

thanks sho

Post by **scr8p** » Wed Mar 28, 2007 5:56 pm

FlyinGN wrote:isn't it 3/16" x 3/8th??? I hope so cause I just bought a bunch:)

http://www.avidrc.com/?action=item&id=88&prevaction=search&previd=&prevstart=0

just as a heads up, the bearings in that link aren't for front wheels at all. those are the ones to use if your gonna convert your rear axles to 3/16", using a standard rc10 buggy hub carrier. if your gonna use the org. 3 piece, 1 piece tq, or pretty much any other older rim for an rc10, you need 3/16" x 5/16" flanged bearings. if your gonna use 3 piece c.e./worlds, b2/b3, losi, or any truck wheel, you need 3/8" x 3/16" plain bearings.

RC10Talk - The Net's Largest Vintage R/C Community