OK here we go ,I don't want to but :?: I have a few DS parts left over,a few other truck parts. but I have more DS than truck. If anyone wants to trade a pan (only) for the glass chassis & parts I have. Im goin to cut the glass chassis up to fit the...
Last post
That sounds pretty good Mike Thanks,I think Tree wants it :?: Johnny
Just found this chassis and I’m not sure when I obtained it. If anyone can add more info I would be appreciated. What Gen of car etc. Thanks
Last post
I have just measured the chassis and it is 1/2” shorter. It must be what you guys say it is..
Short wheel base RC10 where all the rage in the UK in 1985/86, most people used the stock tub but using the extra holes in the nose plate would drill...
I did search the forums and it seemed like most people agree that the original RC10 nose has a 30° angle? I also saw a couple threads that mention a 20° or 25° nose angle?
I'm looking into having a custom carbon fiber chassis made but want...
Last post
Cool, thanks jwscab
Any idea on where to find the plans for a TQ10 chassis?
DOES ANY ONE HAVE A PIC or a close up of the tq10 chassis, i know its graphite but does it look like fiberglass almost w/o the graphite weave and such. i was looking at assomans tq10 and in my box i have an rc10 that looks exactly like it with black...
Last post
I don't think the TQ10 ever came with a rear motor guard, but black motor plate on a 6-gear tranny, that's unique!
Alright so my good friend was nice enough to pick this car up for me because I was almost positive it was a TQ10 chassis and I’ve been on the hunt for one for a really long time now. It’s not in my hands yet but I do have the listing pics....
Last post
If I was choosing between a TQ10 and an RC10 Graphite based upon the actual kit, I personally think the RC10 Graphite has the nicer chassis.
Screenshot_20220602-172944_Gallery.jpg
I like different aspects of each. I like the lines of the TQ...
Here is my newest project.
To fit andys trailarms to the ae carbon chassis.
I did an plate out of 3mm carbon and will fit the arms on and then the plate to the chassisi.
More pics will follow up.
Jerzi
Last post
Excellent job and great carftmanship, especially on the steering rack! Just a slight remark from a purist: this is a Graphite chassis, noty a TQ10 which is different (squared corners and no weave in the carbon plate). Good luck on the tracks!
Someone......tipped me off about an auction that had in the last pic what appeared to be an un-used early TQ10 chassis....low and behold, Jason was on the money. Spotless :shock: utterly amazing since I had never seen a new one until Eddie posted...