AYK Pro Radiant Project (Updated 03/10/2012)

The place for all things AYK.

Moderators: scr8p, klavy69

User avatar
nvxwax
Approved Member
Posts: 1071
Joined: Tue May 25, 2010 8:28 pm
Location: Front Royal, VA (AKA: Helltown)
Been thanked: 1 time

AYK Pro Radiant Project (Updated 03/10/2012)

Post by nvxwax »

Well got this off eBay for 55 bucks (Less the rear wheels and AE shocks on the back)

I just gave it a tare down and rebuild and it was in pretty good condition, The AE shocks are temporary, I have a set of front and rear AYK shocks in route from Hong Kong. The only thing i think i need to source is a new set of front one way wheels, Tires front and back and a body set. unless someone can see something else i'm missing :?:

I'm hoping to get Jake to cut me a Race Prep under-tray out of carbon fiber :mrgreen: , I dont like the radio tray on top, plus its a little cut up.

I have a question on the steering bell-crank, I see some radiants have the horn out the top of the chassis? My car has the horn at the bottom and it sticks out the lower side. whats up with that?

Current Progress:
Image

AYKBOBCAT
Approved Member
Posts: 585
Joined: Wed Nov 22, 2006 2:32 pm
Location: Bas St-Laurent, Canada

Re: AYK Pro Radiant Project

Post by AYKBOBCAT »

This is a good deal you got there. The proradiant had this bellcranck setup. The servo horn is sticking out of the rectangular hole on the side (servo is attached upside down with double sided tape)...

I pm you as well...

User avatar
Seabass
Business Member
Posts: 1402
Joined: Mon Jul 27, 2009 8:34 pm
Location: Mississippi
Been thanked: 12 times

Re: AYK Pro Radiant Project

Post by Seabass »

Dude you ended up with a sweet deal. Congrats..

Jake

User avatar
GJW
Approved Member
Posts: 2325
Joined: Mon Oct 15, 2007 7:22 pm
Location: AUSTRALIA!!
Been thanked: 1 time

Re: AYK Pro Radiant Project

Post by GJW »

good find mate, looks like a nice example 8)

User avatar
nvxwax
Approved Member
Posts: 1071
Joined: Tue May 25, 2010 8:28 pm
Location: Front Royal, VA (AKA: Helltown)
Been thanked: 1 time

Re: AYK Pro Radiant Project

Post by nvxwax »

Just a small update:

I sourced a set of New Boost tires for 9 bucks :) The boost tire seller also threw in some vintage Race-Prep wire, I also sourced a original Race-Prep Under tray and bumper from a great guy here on the forum. I have also added a set of new original PR Shocks, I have some original tires and another set of wheels in route for this project, The Boost tires are just temp

Image
Image

User avatar
jwscab
Approved Member
Posts: 6571
Joined: Wed Jan 28, 2009 9:42 am
Location: Chalfont, PA
Has thanked: 16 times
Been thanked: 498 times

Re: AYK Pro Radiant Project (Updated 03/08/2011)

Post by jwscab »

NICE car in really good shape!

User avatar
Bormac
Approved Member
Posts: 3113
Joined: Wed Sep 05, 2007 3:52 pm
Location: CENTRAL COAST, NSW AUSTRALIA
Has thanked: 21 times
Been thanked: 11 times

Re: AYK Pro Radiant Project (Updated 03/08/2011)

Post by Bormac »

Great job William!

I love the Boost/Pro Radiant!
-Jason.

Still known as- bormac

My collection-http://www.tamiyaclub.com/showroom.asp?id=10980

AYKBOBCAT
Approved Member
Posts: 585
Joined: Wed Nov 22, 2006 2:32 pm
Location: Bas St-Laurent, Canada

Re: AYK Pro Radiant Project (Updated 03/08/2011)

Post by AYKBOBCAT »

:D :D :D :wink:

User avatar
besty22
Approved Member
Posts: 347
Joined: Tue Sep 02, 2008 8:21 am
Location: Central Coast NSW Australia

Re: AYK Pro Radiant Project (Updated 03/08/2011)

Post by besty22 »

Nice job you have done there.
Did I read $55 omg that was a top deal.
I am about to start building a standard radiant from new parts aquired from Bormac and AYKBOBCAT. Gotta love the Radiant.
Respect - Hard Earned but Easily Lost

User avatar
mrlexan
Approved Member
Posts: 6250
Joined: Wed Dec 06, 2006 6:49 pm
Location: Upstate SC
Been thanked: 12 times

Re: AYK Pro Radiant Project (Updated 03/08/2011)

Post by mrlexan »

Ok where did the saddle pack chassis come from? I WANT ONE! :cry:
I am not here cause I am playing photographer and on my mountain bike.
www.gojammedia.com

User avatar
nvxwax
Approved Member
Posts: 1071
Joined: Tue May 25, 2010 8:28 pm
Location: Front Royal, VA (AKA: Helltown)
Been thanked: 1 time

Re: AYK Pro Radiant Project (Updated 03/08/2011)

Post by nvxwax »

mrlexan wrote:Ok where did the saddle pack chassis come from? I WANT ONE! :cry:
:D Ill trade ya my chassis for the basically new built one you got :D jk

User avatar
Seabass
Business Member
Posts: 1402
Joined: Mon Jul 27, 2009 8:34 pm
Location: Mississippi
Been thanked: 12 times

Re: AYK Pro Radiant Project (Updated 03/08/2011)

Post by Seabass »

William, you seem to find stuff all the time. You basically picked up several parts for this car, new shocks, saddle pack tray, etc in a week and half.

It is time to give up the secrets man......... :D

Very nice car, will fit right in with your collection.

User avatar
mrlexan
Approved Member
Posts: 6250
Joined: Wed Dec 06, 2006 6:49 pm
Location: Upstate SC
Been thanked: 12 times

Re: AYK Pro Radiant Project (Updated 03/08/2011)

Post by mrlexan »

Are the front tires narrow or the same width as the rear? Something else I have not been able to find, narrow fronts.
I am not here cause I am playing photographer and on my mountain bike.
www.gojammedia.com

User avatar
murphy3428
Approved Member
Posts: 579
Joined: Mon Oct 06, 2008 11:19 am
Been thanked: 2 times

Re: AYK Pro Radiant Project (Updated 03/08/2011)

Post by murphy3428 »

mrlexan wrote:Are the front tires narrow or the same width as the rear? Something else I have not been able to find, narrow fronts.
Yes the fronts are narrow but the Boost front tires dont fit the pro radiant wheels to well your best bet would be Bormac for the pro radiant tires I also think he has the boost tires aswell

User avatar
Bormac
Approved Member
Posts: 3113
Joined: Wed Sep 05, 2007 3:52 pm
Location: CENTRAL COAST, NSW AUSTRALIA
Has thanked: 21 times
Been thanked: 11 times

Re: AYK Pro Radiant Project (Updated 03/08/2011)

Post by Bormac »

Ive sold completely out of my AYK tyres now. Sorry guys they are all gone.

I do however have the Yokomo HOT LAPS TF-9S front pyramid block tyres which are very very similar. Only $12pr
-Jason.

Still known as- bormac

My collection-http://www.tamiyaclub.com/showroom.asp?id=10980

Create an account or sign in to join the discussion

You need to be a member in order to post a reply

Create an account

Not a member? register to join our community
Members can start their own topics & subscribe to topics
It’s free and only takes a minute

Register

Sign in

  • Similar Topics
    Replies
    Views
    Last post

Return to “AYK Forum”

Who is online

Users browsing this forum: No registered users and 2 guests