I've found a lot of stuff on Tower's site. Most of it says "In Stock" but I haven't ordered anything yet to test that. If I could fifure out how to share my wishlist I'd post that.
Here's something I've been wishing someone would do: How about a webpage with links (and prices, availability or other info) for all the vintage RC10 parts still available through Tower or other companies? I have a ton of stuff on my Tower wishlist which represents many hours of searching. A webpage with links would have saved me (and other vintage fans) loads of time. Just a thought.
Well After searching and searching, I finally got a MIP trans. By blind luck, it came on a RC10G roller I got today. Well... I just realized after all this time looking, I knew noting about SP1 other than it has metal gears :oops:
This trans does...
Last post
Also Are there any other options for the spur gear adapter other than the SP-7?
I need to know the same thing. Just picked up 2 sp1 transmissions as part of a bigger lot, but neither has a spur adapter. The shaft is 5mm, so none of the pinned...
Anyone know where RC Chick has been lately? I hope everything is good with her? I was just reading an old topic that she posted in and it got me to thinking that I haven't saw anything from her in quite some time.
She helped me allot when I was...
Last post
there are quite a few who dont frequent the board much anymore, talk wise.
i was wondering were she was a while ago also.
Well after not running the car for about 15 years i decided to get her back up and running. I needed to replace the speed controller as it was taped together, then i replaced the steering servo because it would not plug into m spectrum receiver. It...
Last post
I'll post a pic if needed, but you notch the diff rings at the inner lip, then drill a hole on both alum diff halves at the same point, insert the same size roll pin (needs to be cut flush with the diff ring)
and wala!
i would love to see a picture...
this is the Bruiser im getting in a few days ( put a down $$ on it) he said its a roller, body is a toyota hilux,and missing parts.
there is no electrics. looks mostly complete too me,
can any one tell me what all i need for it? i plan to complete...
Last post
From what I can see in those pics you are missing the radio box, transmission plugs, shocks and steering linkage.
I think your body is the new Hilux body, judging from the holes drilled for the turn signals. I'm pretty sure the old...
Hi, I haven't been watching or reading to many of the posts on the original boxart RC10 builds.But has anyone noticed that there is no pink stripe on the left side of the body only the right on the original body. It's probably old news.
Last post
It always amazes me that the box art RC10 is as beautiful and timeless as it is. Truly a work of art and a great piece of marketing history regardless of it's obscurity. Coke, Nike and ATT eat your heart out!
So after reading the threads I found on Google my trx1 was left to soak in some 6% hydrogen peroxide in a jar. It's been in there for almost a week and there doesn't seem to be much or any improvement. It's sat on the window sil inside and when I'm...
Last post
Thanks for posting up the process. The parts were always a bit off white, nearly ivory. Your results look great and seem natural for the process.
I think a lot of the nylon whiting is informed by whitening bones. Seeing an alternate to the...
