Left For Dead RC10 Team Car

[Burntslapup]

Found this in a Duratrax Bag on the back of a junked truck that I picked up. Had the AE stock motor, Futaba esc, and 4 6-cell packs of the red cells. Was going to be a shelf queen but chassis not in good enough shape. So it will be a runner to beat up on Reggie.

[shodog]

Nice find. Pop that gear cover off as it may have a losi hydra-drive

[Charlie don't surf]

Awfully cocky for a guy with one post, and open palms in need of parts for that thing

Bout' time- , now if I can get Will and the other 20 guys at my pit table to get their cars together we might have a class-

[Burntslapup]

It's got the AE slipper. The hydro drive would have been a sweet bonus.


LoL. Dang Reggie didn't think you would find this post that fast. it's getting closer to being completed. Got the body painted, the chassis stripped and ready to paint, and most of the plastics cleaned. Hoping it will be done in a few weeks.

[Charlie don't surf]

It's got the AE slipper. The hydro drive would have been a sweet bonus.


LoL. Dang Reggie didn't think you would find this post that fast.

Beat up on who?


Cool, looked like some vintage stuff came out. Makes me want to dust off my rc10. Would be fun to do a vintage race sometime.

Brad Smith RC8B http://racers.rcsignup.com/BradS/

Post Options Quote Reply

Yeah Reggie is super cool and full of info when it comes to the old RC10's. He had that gold tub hooked and doing good last week. I went home and started rebuilding my old team car after watching his run.

Burntslapup//carolinasracersforum.

[Burntslapup]

I speaks the truth. I enjoyed watching the old RC10 run, and by the end of the night it looked really good. But I'm not worried as long as you leave the screw out of the servo.

[Burntslapup]

My take on the Team Car paint scheme.

[Charlie don't surf]

First weekend out get tearing into that thing and we will have it race ready shortly- so far I see tecnacraft turnbuckles and white MIP ball bearing steering that you will want to save for the shelfer you build later- get that list together quick!

[Burntslapup]

all that from a cell phone pic.


So far the only thing I know I need is the rear shock tower, battery box, wheels/tires, and a few screws. All I can order from Tower. But seems I need now to switch out the steering.

[Charlie don't surf]

I'll send you some links here on the wheels via towers site-
you can run a T2 bellcrank set ( they should have it on tower, if not I have one )
also, you will need the 3/16 CVD's from a B2 to run current wheels-

[Burntslapup]

Thanks Reggie.

[Charlie don't surf]

Rear rims- http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=L5ALSF02&P=7
Front rims- http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXCXT5&P=7
Battery cups- http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LX2778&P=7
Rear hubs for 3/16 axels- http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LX2912&P=7

That's all I could find at the moment

[Burntslapup]

Finally started putting the car back together. While going through the box of parts I came across two things that I would like to know if installing would be worth while. 1st I found a Track Master Long Diff Shaft for RC10. 2nd RC Performance Ultima Titanium Hinge Pin set.

[Charlie don't surf]

I would have to see the diff shaft, I don't think it is for the stealth though- the RCPS pin set is very worthwhile- but you have to save the decals for me

[Burntslapup]

Unforchanitly there are no decals with either one. However I do have something you may want. I found a set of AE fronts NIP. If you want them they are yours.