trinity reflex10 Jack Johnson
- hairymuffin
- Approved Member
- Posts: 50
- Joined: Tue Jul 22, 2008 1:29 am
- Location: moreno valley ca
trinity reflex10 Jack Johnson
Got this at my local hobby store...It looks like it has one run on it with a new novak hpc-hv esc,jr servo..it is in awesome condition...I want to drive it once but it have those trinity pitch spur gears...I never been into dirt oval but this thing is beautiful
- EvolutionRevolution
- Approved Member
- Posts: 1494
- Joined: Tue Feb 01, 2011 3:24 pm
- Location: Netherlands
- Has thanked: 17 times
- Been thanked: 34 times
- hairymuffin
- Approved Member
- Posts: 50
- Joined: Tue Jul 22, 2008 1:29 am
- Location: moreno valley ca
- EvolutionRevolution
- Approved Member
- Posts: 1494
- Joined: Tue Feb 01, 2011 3:24 pm
- Location: Netherlands
- Has thanked: 17 times
- Been thanked: 34 times
Re: trinity reflex10 Jack Johnson
Thank you!
Am I seeing that right? Are the shocks mounted to the wishbones using pins that rely on mere friction to stay in place?
Am I seeing that right? Are the shocks mounted to the wishbones using pins that rely on mere friction to stay in place?

- Jirka
- Approved Member
- Posts: 797
- Joined: Mon Feb 23, 2009 8:40 am
- Location: Europe
- Has thanked: 30 times
- Been thanked: 24 times
Re: trinity reflex10 Jack Johnson
Really nice find, a real race car form well-known driver!
I think the shock bottoms stays in place by that set screw that is in bottom of the shock end.
Jirka
I think the shock bottoms stays in place by that set screw that is in bottom of the shock end.
Jirka
- hairymuffin
- Approved Member
- Posts: 50
- Joined: Tue Jul 22, 2008 1:29 am
- Location: moreno valley ca
Re: trinity reflex10 Jack Johnson
I have not seen him in years....Last I saw of him was in the mid 90's racing nitro with the kyosho mp5, and losi had just came out with their GTX..I will ask Anam Drake the next time I see him...Richard Trujillo might know.....this car looks to be a PIA to change the motor pinion.....Dirtdiver wrote:Any idea what happened to Jack Johnson?
I got a old rc car action magazine with the reflex 10 in it..It states that the Reflex was Trinity's 1st car kit...
- Charlie don't surf
- Approved Member
- Posts: 9219
- Joined: Tue Apr 08, 2008 2:44 pm
- Location: USA
- Has thanked: 280 times
- Been thanked: 379 times
Re: trinity reflex10 Jack Johnson
The Reflex 10 was designed by Jim Deiter and was a slightly tweaked and modified Custom Works Intimidator 10 based car. Super cool and fairly rare ( most dirt oval stuff is ) the pedigree is wicked cool as a bunch of the fast guys ( like Kent Clausen ) used to run the Dirt Ovals a few times a year when Roar and Norrca held national events. I am pretty sure that the Revolver 12 carpet car was Ernie's first kit attempt after 1985 and I don't remember seeing the Reflex 10 until like 89-90.
- hairymuffin
- Approved Member
- Posts: 50
- Joined: Tue Jul 22, 2008 1:29 am
- Location: moreno valley ca
Re: trinity reflex10 Jack Johnson
I believe the revolver came much later than the evolution 10 wich was in 92'..Im my rc car action magazine(july 1992 mag) it says that the reflex was trinity's 1st car kit..maybe someone can chime in..I was never into dirt oval.. They were expensive for me..It would be nice to drive this thing If I had a nice well groomed oval
- Charlie don't surf
- Approved Member
- Posts: 9219
- Joined: Tue Apr 08, 2008 2:44 pm
- Location: USA
- Has thanked: 280 times
- Been thanked: 379 times
Re: trinity reflex10 Jack Johnson
Yep, looked around to find it was released in 92'. Good news in now I can sell it and start looking for a Deltahairymuffin wrote:I believe the revolver came much later than the evolution 10 wich was in 92'..Im my rc car action magazine(july 1992 mag) it says that the reflex was trinity's 1st car kit..maybe someone can chime in..I was never into dirt oval.. They were expensive for me..It would be nice to drive this thing If I had a nice well groomed oval

-
- Approved Member
- Posts: 83
- Joined: Sat Mar 07, 2009 2:45 pm
- Location: East Texas
- Been thanked: 2 times
Re: trinity reflex10 Jack Johnson
The reflex was Trinity's first car, but about the only thing they designed was the instruction manual. Jim Dieter was already producing the car under his own name. Most of the parts on it are from other manufactures and I think that made it much better. Every part was the best from the box. ( A&L steering, robinson caster and steering blocks, Losi drive parts and turnbuckles, Trc shocks and body mounts) The rear engine layout was there to put more weight on the back tires and the rear toe-in was adjustable to really help get traction. Trinity's version just changed to black nylon instead of the white that it was before. They are so nice and well built, that it would still be just as competitive today.
- littleVETTE
- Approved Member
- Posts: 1418
- Joined: Mon Aug 11, 2008 4:07 pm
- Location: U.S.A.
- Has thanked: 6 times
- Been thanked: 9 times
Create an account or sign in to join the discussion
You need to be a member in order to post a reply
Create an account
Not a member? register to join our community
Members can start their own topics & subscribe to topics
It’s free and only takes a minute
Sign in
-
- Similar Topics
- Replies
- Views
- Last post
-
- 0 Replies
- 258 Views
-
Last post by hugger19
-
- 5 Replies
- 1914 Views
-
Last post by phoenix
-
- 2 Replies
- 1256 Views
-
Last post by DHC6
-
- 9 Replies
- 3041 Views
-
Last post by Johnboy72
-
- 10 Replies
- 2397 Views
-
Last post by JK Racing
-
- 16 Replies
- 2060 Views
-
Last post by m_vice
-
- 39 Replies
- 7816 Views
-
Last post by wyldbill
-
- 5 Replies
- 1268 Views
-
Last post by TenzoR
Who is online
Users browsing this forum: No registered users and 2 guests