Some losi parts variations
- JK Racing
- Super Member
- Posts: 4603
- Joined: Thu Jul 19, 2007 2:32 pm
- Location: Placentia, CA
- Has thanked: 103 times
- Been thanked: 200 times
Re: Some losi parts variations
to memory (which is getting worse by the year, LOL)...only the street weapon had different rear axles.
--Joey --
Vintage A&L and Factory Works
Old School Racer & Vintage RC Car nut
JKRacingRC.com
Vintage A&L and Factory Works
Old School Racer & Vintage RC Car nut
JKRacingRC.com
- RCveteran
- Approved Member
- Posts: 1362
- Joined: Sat Jul 10, 2010 6:48 pm
- Has thanked: 4 times
- Been thanked: 100 times
Re: Some losi parts variations
This chassis comes from the very 1st run of JR-X2's released to hobby shops and belongs to my lhs guy Bob whose been there since 1984, he tells me that as soon as they got them in stock he put a kit aside for himself. I was surprised at the course finish to the bottom of this chassis which although it has a few extra holes is in pretty good shape. Click on the pictures to see an enlarged view, the rough surface stands out better that way.
Attachment:
IMG_2078_90.jpg [ 234.38 KiB | Viewed 86 times ]
Attachment:
IMG_2079_90.jpg [ 250.11 KiB | Viewed 86 times ]
I just acquired a new chassis plate that has the exact the same finish and 3rd hole drilled by the steering post mounts?? Pics not working, check page two of this thread for chassis pics.
Attachment:
IMG_2078_90.jpg [ 234.38 KiB | Viewed 86 times ]
Attachment:
IMG_2079_90.jpg [ 250.11 KiB | Viewed 86 times ]
I just acquired a new chassis plate that has the exact the same finish and 3rd hole drilled by the steering post mounts?? Pics not working, check page two of this thread for chassis pics.
- DerbyDan
- Approved Member
- Posts: 1836
- Joined: Tue Sep 08, 2009 8:04 am
- Location: Northampton UK
- Has thanked: 2 times
- Been thanked: 17 times
Re: Some losi parts variations
Argh! Stop rubbing it in ...... LOLRCveteran wrote:I just acquired a new chassis plate that has the exact the same finish and 3rd hole drilled by the steering post mounts?? Pics not working, check page two of this thread for chassis pics.
My T.C Showroom; http://www.tamiyaclub.com/member.asp?id=28990
- Asso_man!
- Approved Member
- Posts: 3959
- Joined: Thu Aug 03, 2006 7:49 am
- Location: EU
- Has thanked: 40 times
- Been thanked: 70 times
Re: Some losi parts variations
Was this ever addressed? I recently got one NIP and was wondering when they came out. I had never seen one before until I found this thread and saw Al's one.a01butal wrote:Anthony, where does a white front bulkhead fit into the scheme of things? Found this yesterday in a box of Losi things and thought it was kind of odd. Not the best of pictures but you get the idea.
_____________________________________________
_____________________________________________
Come and visit the stable
_____________________________________________
Come and visit the stable
- GJW
- Approved Member
- Posts: 2325
- Joined: Mon Oct 15, 2007 7:22 pm
- Location: AUSTRALIA!!
- Been thanked: 1 time
Re: Some losi parts variations
Asso_man! wrote:Was this ever addressed? I recently got one NIP and was wondering when they came out. I had never seen one before until I found this thread and saw Al's one.a01butal wrote:Anthony, where does a white front bulkhead fit into the scheme of things? Found this yesterday in a box of Losi things and thought it was kind of odd. Not the best of pictures but you get the idea.
think they came out on the gas trucks david.
Re: Some losi parts variations
Awesome thread, lots to absorb! thanks guys Ive seen alot of these variations on the few X2's that I have. I spotted some new ones today (new to me) but have no pics yet for them... A 4 hole flat rear pivot support, and grey shock cartridges compared to black. I used that pivot support for a mid motor experiment, came out great btw
- GJW
- Approved Member
- Posts: 2325
- Joined: Mon Oct 15, 2007 7:22 pm
- Location: AUSTRALIA!!
- Been thanked: 1 time
Re: Some losi parts variations
had these for quite a while and forgot all about them
white outdrive joint's (only seen super slider's not these)
also glass reinforced jrx2 front arms(bottom is the glass one)
white outdrive joint's (only seen super slider's not these)
also glass reinforced jrx2 front arms(bottom is the glass one)
- Jirka
- Approved Member
- Posts: 792
- Joined: Mon Feb 23, 2009 8:40 am
- Location: Europe
- Has thanked: 18 times
- Been thanked: 15 times
Re: Some losi parts variations
Could those exist because molding reasons? All drive shaft parts comes from one mold and super slider's can be sold easily, but Losi have to put these somewhere too. I have seen these connected to Losi's dog bone drive shafts, but on outer side of course.GJW wrote:white outdrive joint's (only seen super slider's not these)
Jirka
-
- Approved Member
- Posts: 8921
- Joined: Tue Apr 08, 2008 2:44 pm
- Location: USA
- Been thanked: 8 times
-
- Approved Member
- Posts: 1998
- Joined: Fri Feb 16, 2007 10:09 pm
- Location: Upstate NY
- Been thanked: 12 times
Re: Some losi parts variations
where did you find those? I've never seen them before.
wondering if you stumbled upon an old factory drivers stash and got some non-production parts as I have never seen the white outdrives either. There were some light colored outdrives, but they were yellowish, not the pure white of the super sliders.
-
- Approved Member
- Posts: 8921
- Joined: Tue Apr 08, 2008 2:44 pm
- Location: USA
- Been thanked: 8 times
Re: Some losi parts variations
I have seen the molding prototypes of the H arm and those were not them-aconsola wrote:where did you find those? I've never seen them before.
wondering if you stumbled upon an old factory drivers stash and got some non-production parts as I have never seen the white outdrives either. There were some light colored outdrives, but they were yellowish, not the pure white of the super sliders.
- scr8p
- Administrator
- Posts: 16521
- Joined: Tue Feb 07, 2006 9:46 pm
- Location: Northampton, PA
- Has thanked: 28 times
- Been thanked: 955 times
Re: Some losi parts variations
could the outdrives be SRS? they made a lot of white aftermarket parts.
-
- Approved Member
- Posts: 8921
- Joined: Tue Apr 08, 2008 2:44 pm
- Location: USA
- Been thanked: 8 times
Re: Some losi parts variations
SRS was all machined delrin, those are molded pieces-scr8p wrote:could the outdrives be SRS? they made a lot of white aftermarket parts.
Create an account or sign in to join the discussion
You need to be a member in order to post a reply
Create an account
Not a member? register to join our community
Members can start their own topics & subscribe to topics
It’s free and only takes a minute
Sign in
-
- Similar Topics
- Replies
- Views
- Last post
-
- 4 Replies
- 406 Views
-
Last post by mrlexan
-
- 5 Replies
- 961 Views
-
Last post by DerbyDan
-
- 2 Replies
- 597 Views
-
Last post by FasterLouder
-
- 18 Replies
- 1554 Views
-
Last post by juicedcoupe
-
- 1 Replies
- 1780 Views
-
Last post by CraigB
-
- 5 Replies
- 643 Views
-
Last post by Erich Reichert
-
- 7 Replies
- 549 Views
-
Last post by terex
-
- 5 Replies
- 867 Views
-
Last post by Phin
Who is online
Users browsing this forum: No registered users and 2 guests