I managed to break a front shock tower casing a triple jump but other than that I've broken nothing. I would get a set of front/rear arms, and wheel nuts (since they are metric).
RC10 Short Arm | Novak Tempest ESC | Tamiya Torque Tuned 25T | Savox 1258 | Stealth Trans w/ Exotek Slipper Eliminator (geared 24/81)
RC10B3 | HW Just Stock Club Spec | Reedy 13.5 | Savox 1258
Front & rear arms, steering spindles, castor blocks and rear hubs. I buy these spares for any new buggy regardless of what it is.
Only additional thing I would suggest is titanium turnbuckles. Bent mine on the first race day.
Overall the buggy is very tough, i have cartwheeled mine many times and only causalty was the turnbuckles.
I was going to start disassemble and clean my 10T when I had a thought. Do I have enough spare parts to put another tub together? The answer of course was yes. It may not be pretty or complete(yet) :D But it has some cool stuff on it.Nothing was...
Last post
Thats pretty cool that you built that with spare parts man. I need to buy some more parts lots my stock pile is looking a little low. great job
I would like to thank Rizzo and Scollins for the idea. I've been working on this for about 2 weeks now, mostly waiting for the rear tires off Ebay. It was a very scratched-up chassis, little sanding and cutting added the paint plus spare parts from...
Last post
Heres some more paint scheme ideas for u.
U will have to trim the arches a little , I had to on my RC10 as I wanted the body quite low so as to hide the chassis for some more realism, strangley enough it helps the handling having the body as low as...
I had a bunch of spare parts from my days owning many clods, so I decided to build one. Only parts I purchased were esc, servo and wheels (why are they only available in chrome?).
Old parts on here are Apm chevy bumper, Duratrax v-spike & diamond...
Last post
Wow, that came out nice. Always cool when you build something up from basically nothing.
Even though this is technically a buggy, I'm doing a truck conversion with it.
The plan is to build as much of it from my parts/junk boxes as possible. Of what you see here, the transmission ($40 parts trans)and rear control arms are the only...
Last post
Lookin' good! At first I thought this was gonna be a straight 10T build but it's more of an old school conversion! I fondly remember the truck conversion wars from bitd. I snapped up an Eagle right when they came out. Looking back on it now, all it...
I need some help to find a spare part to my Kyosho Scorpion from 1982.
In the building manual its referd as : 87.7.10160 and is a pinion gear with 10 theth and outer diameter of aprox 12mm with a center hole of 4mm.
I have serched the internet...
Last post
Thank you!
I will go for the E-bay option. From what I can see it looks exactly the same :D
My instruction manual don't have the number you refered to thou, but mine is a Swedish translation so maybe diffrent countries have diffrent systems?...
Well, the building itch has hit me again. I was going through my old parts box, and found I had almost everything to put together another RC10...I already have one, so I've decided to experiment. I picked up a sheet of 3mm G10 and using only the...
I have a ton of parts from auctions I have won over the past several months and being the type of person who can't throw anything away I decided to see if I could put some of them to good use. I have had the two black rear rims for a while and I...
Last post
Nice, but the motor's on the wrong side. 8)
:oops:
Thanks for the compliments guys. I'll post some more pics with the driver and shell when they're done.
Google Adsense [Bot] and 11 guests