Losi XX Front Shock Tower Conversion

Post by **mikedealer** » Mon Jan 21, 2008 5:02 pm

not sure if its been done or tested, but i found 4-5 at my LHS and decided to give it a try, comes out perfect. Bottom needs about .5 mm sanded off, and then just holes drilled to match.

Post by **mikedealer** » Mon Jan 21, 2008 5:03 pm

that picture above is post drilling, had to drill 6 holes, but you can get away with less.

Post by **mikedealer** » Mon Jan 21, 2008 5:47 pm

mounted it on my "runner car", no need to modify tower for nose tubes in any way. its a nice fit, and there are a bunch of them on ebay right now too

Post by **scr8p** » Mon Jan 21, 2008 6:01 pm

pretty sweet. i did it with a b3 front tower a little while back................

: IMG_2649.JPG (197.24 KiB) Viewed 866 times

: IMG_2649.JPG (197.24 KiB) Viewed 866 times

: IMG_2652.JPG (204.63 KiB) Viewed 866 times

: IMG_2652.JPG (204.63 KiB) Viewed 866 times

: IMG_2653.JPG (210.74 KiB) Viewed 865 times

: IMG_2653.JPG (210.74 KiB) Viewed 865 times

Post by **mikedealer** » Mon Jan 21, 2008 6:17 pm

i actually saw that and that is what inspired me to try. the problem when i tryed that with my tower was that i could use the nose tubes with the b3 tower. when i saw these xx towers sitting there, i just had to try lol.

Post by **scr8p** » Mon Jan 21, 2008 6:22 pm

ya, you can pretty much only use the b3 tower on a graphite chassis. i'm gonna have to pick up one of those xx towers. i like it.

Post by **Keyz** » Mon Jan 21, 2008 6:57 pm

That is a really nice car btw mikedealer, nice alloy bellcranks and polished bits and pieces.

Looks really nice with the XX tower on it, well done.

Post by **mikedealer** » Mon Jan 21, 2008 7:00 pm

thanks, dont think i ever posted any pictures of it anywhere to be honest, its going to be a runner, just havent finished painting the body yet, im waiting for some airbrush needles to arrive. has a t2 tower in back also.

Post by **wyldbill** » Mon Jan 21, 2008 10:36 pm

wow , i'll have to try that one. i have some jammin jay xx upgrade towers here in fiberglass and carbon fiber. i got them a while ago and never thought of doing that now im gonna have to try it. mabey they will look good on one of my sprint car conversions, the large opening inside just may clear the custom works cage downtubes. thanks for the idea!

Post by **mikedealer** » Mon Jan 21, 2008 10:46 pm

just to clarify too, you will need to take like 1mm off the bottom of the XX plate otherwise it wont sit right on the RC10 noseplate, i used a belt sander for mine

RC10Talk - The Net's Largest Vintage R/C Community

Losi XX Front Shock Tower Conversion

Losi XX Front Shock Tower Conversion

Re: Losi XX Front Shock Tower Conversion

Re: Losi XX Front Shock Tower Conversion

Re: Losi XX Front Shock Tower Conversion

Re: Losi XX Front Shock Tower Conversion

Re: Losi XX Front Shock Tower Conversion

Re: Losi XX Front Shock Tower Conversion

Re: Losi XX Front Shock Tower Conversion

Re: Losi XX Front Shock Tower Conversion

Re: Losi XX Front Shock Tower Conversion

Create an account or sign in to join the discussion

Create an account

Sign in

Who is online