Unusual Vintage Buggy Wheels, '4x4' option, & Giveaway!

[toyranosaur]

CHECK OUT THE 'Rear Tires On Front' 4x4 Option!

So! I've been way into some Re-Re Buggies lately- The Scorpion, Tomahawk, Wild One & the like. These are fairly inexpensive, classic cars that I've been wanting for some time. I get 'em & build 'em & go about looking up stuff about 'em: First thing I notice is, they have a common flaw- There is about Nyet for wheels as these use odd drives. What a Crime! I also notice a lot of Chaps want to put rear tires on the front for a Unique, Beefy, Baja look. It becomes apparent that there is only one shop that can fix this, and it happens to be on my property- Lucky eh?

These wheels use only the Tamiya Sandblaster 915-size tires and similar that are used on the Tamiya Brat, Rough Rider, etc. The 915's are awesome, so those are what is recommended but there are one or two others out there. These wheels use the direct Pin Drive & dispense with all the other odd nonsense that makes 'em so bloody hard to find anything different. Googling these cars made me realize most were virtually identical, MUST FIX!

Now, of course I'm s'posed to sell you on these, mmmDuh. However, it is quite seriously that I tell you I put these on my Tomo & ESPECIALLY the Wild One, and set them by the TV for the last few days. I'm constantly amazed how Bad-*** these look, and they keep growing on me the more I look at 'em. Neither car will ever have anything but these on 'em ever again.


More pics here! http://www.rogueelementcomponents.com/product-pics.html



DESCRIPTIONS
Standard Front/Rear: Pretty Self-Expanatory here. Rears & Front Smaller wheels.
'4x4' All Rear Tires: These take rears all 'Round! I anticipate these will be the best sellers- Totally Change Up the Style, and Serious-Up the Attitude. They take bearings in the front, just bolt-on with no fiddling around or cutting up. The Answer to a lot of prayers!

PRICING, SPARES, and Possible DISCOUNT!
Wheelsets are $99.99 USD Shipped in the US: Please add $12 per whole order for Int'l.


BUT, if you Pay Up Front for your Order (No Deposit) you can get them for ONLY $89.99 PER SET ($10 savings!) Woot! (See Below)

-Spares are available for $24.99 each, Specify Front or Rear - See 'Ordering Checklist' Below





BE ADVISED- Please Read!

All Wheelsets come with: 4 wheels, 4 Hex Axle Nuts (Not engraved, photos used what I had onhand), 0-80 Screws & Most Importantly,a pair of Spacers for the Rears (Not shown) that lets you mount them on longer axles- The Wild One, for instance. If ya don't need 'em fine, but if ya do they're included!

The SRB's are straight bolt-ons. The Scorp & Tomo fronts will need Four, 4x11x4 bearings- Just a buch each here if ya need 'em-
http://www.avidrc.com/product/1/bearings/559/4x11x4-Metal-694ZZ-bearings.html The Wild One may require a 1-2mm. front washer and/or perhaps require a TINY bit of trimming of the front ball joint/knuckle are area- VERY little, but just tellin' ya straight so no one freaks out.

As the rears are drilled for the rear axle, I'll need to know if you want Tamiya or Kyosho wheels- Checklist below.







ORDERING CHECKLIST!



This what you need to do to complete an order. Kindly make SURE to check all steps! If it's not clear just contact me- Lotsa choices = possible confusion. All orders must be in BY JULY 12th!


I need to know ALL of the following, by SENDING AN EMAIL (NOT Paypal Notes!) to me at [email protected]


-Your Mailling Address (Do NOT send your payment/Deposit as 'Gift', and I should get it from Paypal)

-Total Number of Sets

-If you want 'Standard' (takes Front/Rear Tires) or '4x4' (takes All Rear Tires) Sets

-Whether for Tamiya or Kyosho

-If you want any spares, and if so, Front or Rear

-Now, total that up from the 'Pricing' listed above; Send all info to my Email, and send Payment or Deposits in USD only directly to my Paypal address, [email protected] (Copy & paste address to avoid misspellings.) Free shipping in US.

- International orders will be charged a flat $12 -This covers a whole order regardless of how many are shipped- Who loves ya?

-Ship Date is 'Estimated' as I never know how many will be made, just FYI

-Deposit Due/Order Cutoff date: July 12th, 2016

-Estimated Shipping Date: August 18th, 2016

------------------------GIVEAWAY---------------------------

As usual, a Lucky Winner will score a SET OF THEIR CHOICE fer FREE! Just post up & check back here by July 10th when the Winner will be chosen! The only rule is, you MUST get hold of me with your shipping address within 7 days of being picked; On the 8th day you're out, and we don't want THAT to happen eh? Good Luck Chaps & Ladies! Chris REC

[RC10resto]

Clean and simple design, i like them

[Diggley]

Chris,

Those wheels are INCREDIBLE!!!!

Those are the best wheels I have ever seen for the Sand Scorcher!!

My unfinished 'Scorcher would love to rock a set!

[limestang]

Love the 4x4 look on these classic rides - Great work as always Chris!

- Limestang

[ron]

Where can you get better wheels than these??? Custom made and with a vintage look, love those scale screws you have one, All I have seen are M3 screws, jeez not so scale like.

Keep up the awesome work Chris!!!

[shodog]

Love them, I'm gonna have to get a set.

[Diamond Dave]

They sure are a quality piece. Not for me this time, but worth the coin either way.

I am still trying to figure out what to do with the last few sets I bought.

Nice work as usual Chris.

[R Cane]

Awesome!
I think they look best on the bug...

[aeiou]

I'm in for a set. I really like the 4x4 look, especially on the bug.

[Diamond Dave]

I'm in for a set. I really like the 4x4 look, especially on the bug.

I agree.

[toyranosaur]

These aren't setting the world on fire sales-wise Maybe the Holiday? But either way, every set so far has been for the '4x4' Scorcher. Chris REC

[RC10th]

Definately one of if not the best looking wheels in my opinion.

[Incredible_Serious]

Nothing like a beautiful set of wheels, to set off a build!

Great work again, Chris...

Alex

[328isjohn]

As a CNC guy myself,I bow down at your great work and awesomeness

[dsmith]

nice... ...thanks.
those would look good on my brat...