I see Red
- shodog
- Approved Member
- Posts: 3816
- Joined: Thu Oct 05, 2006 3:09 pm
- Location: Washington
- Has thanked: 3 times
- Been thanked: 86 times
I see Red
today I got back some parts from the annodizers. They are slated to go on my Composite Craft Worlds buggy. The red is a nice ruby color and looks much better in person than it does in these pics.
Here are the other parts I will be replacing
Here are the other parts I will be replacing
- mikedealer
- Approved Member
- Posts: 1778
- Joined: Fri May 18, 2007 12:25 am
Re: I see Red
i have a link to purchase some hammad ghuman alloy shock bushings if your interested, hard to find store but they do still have them for like $10... i cleaned em out of all the other HG goodies they had at some point and left a bunch of these.. shoot me a PM if interested
or if anyone else is interested let me know and ill share the link, they have 4 left in stock it says.. they also have 4 of the lower spring retainer kits let in stock too at $10 each
Looks really sweet too, is the anodizer a local guy? i was looking to get some stuff done and the few guys locally to me are lazy lol
or if anyone else is interested let me know and ill share the link, they have 4 left in stock it says.. they also have 4 of the lower spring retainer kits let in stock too at $10 each
Looks really sweet too, is the anodizer a local guy? i was looking to get some stuff done and the few guys locally to me are lazy lol
- shodog
- Approved Member
- Posts: 3816
- Joined: Thu Oct 05, 2006 3:09 pm
- Location: Washington
- Has thanked: 3 times
- Been thanked: 86 times
Re: I see Red
I finally got to work on this buggy today. I found out that 1.32 shock shafts are really long so I plan to pick up a set of 1.02's for the rear. Overall I really like the look of the clear bodies and red annodized accents. Next up will be trimming the body and painting.
- scr8p
- Administrator
- Posts: 16540
- Joined: Tue Feb 07, 2006 9:46 pm
- Location: Northampton, PA
- Has thanked: 28 times
- Been thanked: 976 times
Re: I see Red
looks pretty sweet, jim.
i know they'd be stiff, but how about a set of the red springs?
i know they'd be stiff, but how about a set of the red springs?
-
- Approved Member
- Posts: 1998
- Joined: Fri Feb 16, 2007 10:09 pm
- Location: Upstate NY
- Been thanked: 12 times
Re: I see Red
Firm, Red springs would be perfect, it will keep it from bottoming on landings after hitting the big ramps
Beautiful build as usual Shodog !
Beautiful build as usual Shodog !
- skunk.werkz
- Approved Member
- Posts: 246
- Joined: Sat Dec 22, 2007 4:09 pm
- Location: Pennsylvania
- Been thanked: 1 time
Re: I see Red
Was the anodizing done locally or did you have to send it out of state? I would love to send out stuff to have it re-anodized the factory gold (or as close as I can get it)
- shodog
- Approved Member
- Posts: 3816
- Joined: Thu Oct 05, 2006 3:09 pm
- Location: Washington
- Has thanked: 3 times
- Been thanked: 86 times
Re: I see Red
Red springs would look good. On my next hobby shop hit, I'll look for some.
I had a buddy at my work do the annodizing for me. I can't offer it up to anyone else otherwise I'd get busted.
Jim
I had a buddy at my work do the annodizing for me. I can't offer it up to anyone else otherwise I'd get busted.
Jim
- JPAE07
- Approved Member
- Posts: 517
- Joined: Sat Nov 17, 2007 8:17 pm
- Location: Placentia, CA
- Has thanked: 1 time
Re: I see Red
I had a local place do some anodizing for me but it can be cost prohibitive. A WC Chassis, motor plate, nose x 2, and nose tubes cost me around $140. I believe this was actually fair since they usually do larger batches and require a min order at $250 plus.
Jim, nice car btw.
Jim, nice car btw.
- mikedealer
- Approved Member
- Posts: 1778
- Joined: Fri May 18, 2007 12:25 am
Re: I see Red
hell if i could make the money back, i would purchase the anodizing kit and start doing stuff..
- scr8p
- Administrator
- Posts: 16540
- Joined: Tue Feb 07, 2006 9:46 pm
- Location: Northampton, PA
- Has thanked: 28 times
- Been thanked: 976 times
Re: I see Red
that's what's keeping me from doing it.mikedealer wrote:hell if i could make the money back, i would purchase the anodizing kit and start doing stuff..
- mikedealer
- Approved Member
- Posts: 1778
- Joined: Fri May 18, 2007 12:25 am
Re: I see Red
well i have like 5-7 chassis i would redo, along with 5+ noseplates and like 10 motor plates.. along with a box full of shock bodies and caps... then a bunch of screws... and probably a couple wheels... and maybe a few random odd and ends parts...
i guess the appeal of smelling oven cleaner for a few days to strip the old stuff off is not something i am looking forward too lol.. the anodizing part is pretty easy..
i guess the appeal of smelling oven cleaner for a few days to strip the old stuff off is not something i am looking forward too lol.. the anodizing part is pretty easy..
- mikedealer
- Approved Member
- Posts: 1778
- Joined: Fri May 18, 2007 12:25 am
Re: I see Red
caswell sells the deluxe system for $800, or the basic kit for like $325. Probably gonna need the deluxe kit.. So $800 bucks seems like a lot, plus another $100 in dyes probably... its a lot of money... if i could anodize anything other than RC car parts i would probably invest in one.. but the only other real hobby other than RC that anodizes is paintball guns usually... and the ocasional motorcycle part... just seems expensive to me
Create an account or sign in to join the discussion
You need to be a member in order to post a reply
Create an account
Not a member? register to join our community
Members can start their own topics & subscribe to topics
It’s free and only takes a minute
Sign in
-
- Similar Topics
- Replies
- Views
- Last post
-
- 51 Replies
- 6047 Views
-
Last post by Prince Steve
-
- 10 Replies
- 808 Views
-
Last post by vintage AE
-
- 28 Replies
- 4919 Views
-
Last post by vintage AE
-
- 12 Replies
- 2092 Views
-
Last post by Kyoshojoe
-
- 12 Replies
- 1565 Views
-
Last post by coxbros1
-
- 23 Replies
- 2284 Views
-
Last post by jaycal
-
- 19 Replies
- 3129 Views
-
Last post by Old Twister
-
- 20 Replies
- 2285 Views
-
Last post by vwjuice
Who is online
Users browsing this forum: Bing [Bot] and 25 guests