I have a XXX-t that has a bunch of parts that are missing from it but it does have the transmission(see my Losi forum for pics). What do I need to put that tranny into a gold pan rc10/10t without drilling holes in the chassis. If there are no options I will probably drill...
This has found its way to me in the past couple of days.... from what i gather it is a Losi Hydradrive on a Team Suzuki shaft. Having researched them a little I have found a handful of examples fitted onto Works '91, '93 and Pavadis cars.
Does...
Last post
2013-04-04002006_zpse37d2ef3.jpg
Have not built yet but have gathered a few bits including shaft!
This has found its way to me in the past couple of days.... from what i gather it is a Losi Hydradrive on a Team Suzuki shaft. Having researched...
I'm currently tinkering with trying a Losi Hydradrive on my RC10 however I'm not sure if the conversion should use the original stealth slipper backplate or the Losi 3132 one. Annoyingly I have the losi hydra unit, most of the losi slipper unit and...
Last post
Hi, thanks. I've used the Losi one with a Thorp shaft. Raced it on a typically retro outdoor uk track (dust/dirt/grass/bumpy) and it worked very well. I was able to get the power down so much smoother and easier than the modern cars around me. Has...
I had started a build thread over on rctech a week or so ago and just found this site. Thought I would share it with you all.
I was looking at getting back into RC and wanted to go short course. I was looking at either the sc10 or the blitz and...
Last post
Time for another update. The transmission is back in for a second time now and the battery hold down and esc are remounted again.
Back half is finished finally. Up front I made a few changes. I moved the inner tierods forward 4mm on the steering...
Picked this guy up in a lot the other day. Wasn't too sure what I was gonna do with it. I decided to go ahead with a build. Pretty complete truck. Wish it wasn't dyed, but don't we all! :roll:
Last post
Just sold this guy on the bay. Already having seller's remorse...
I'm brand new on here but not new to the Hobby. I dug up my old (or what the guy at the hobby shop called vintage - made me feel old) RC10T, after seeing my buddys new HPI blitz. My truck is in good shape and I got it up and running with a shock...
Last post
It looks like chassis extension may create a weak point in an otherwise solid rig.
I haven't done this mod personally but I would think as long as you add the custom nose tubes it should stay fairly stiff... at least worth a try if you have a...
Who has used this RC10T to T2 steering conversion kit and does it work well enough over stock to justify the cost? I'm not currently in need to replace the old stock servo saver setup, but trying to plan for possible future breakage, and given the...
got bored today, snapped some pics of a couple projects that are pretty much done.
first is a rpm ultra-molded chassis conversion for the rc10.
full-on rpm besides the trans, i keep forgetting to order a rpm trans for it as well as a b2 body that...
Last post
Thanks Hoopty... I'll pass by one of the LHS here and check out their Trinity wheels.
Bing [Bot],