Nice thanks for sharing , love my Zerda , been thinking of getting a second rear gearbox to mod to make a mid conversion .
If a jobs not worth doing then its certainly not worth doing well.
A problem shared is a problem halved but an advantage shared is no advantage at all.
Now I continue with a ZERDA, who have received a small preparation to be a hard racer (modification from the age):
-The motor pass to the mid, with hand made alloy plate and alloy support gear (hm).
-A upper deck set (3), to upgrade stiffness...
Hi guys. Yesterday I took my Zerda down to the famous St Ives race trak along with a couple of other buggies for some fun.
Its great having one of these cars again and I like evrything about it. With a 19 turn Komodo Dragon bolted in and a 5000 lipo...
Last post
That's looking good!
Now, make sure you paint the driver well in time: you don't want to have it rivaling the last-minute paintjob Jason did on his ;)
Pretty much a new build.
I had a lot of parts gathered up over a few years.
missing the driver (although I 'think' I could use a Kyosho or indeed AE one) and missing 1 cross piece for the cage.
my story with this car was that I went to a...
Last post
With one of the test parts I did sanding with 500 grit sandpaper and then light brush with Acetone. Acetone will soften and bind the plastic layers together. It will also put a shine on the plastic. Don't use too much Acetone or it will soften the...
Hi fellas i have a question, i just bought a hirobo zerda the built version with the red roll cage and i was wondering has anyone tried dying the red roll cage black and if so how did it turn out. Thanks in advance
Last post
You can successfully dye nylon a darker color, but I'm not sure you can dye ABS plastic...I'm pretty sure the roll-cage isn't nylon. Here's the thing: nylon can actually be strengthened by the boiling water in the dyeing process. That's good. ABS...
I am restoring a vintage Hirobo Zerda and was wondering if anyone knows where I might be able to buy new parts? I am particularly interested in the drive belts.
I have always liked the look of the pipe framed buggies and ZERDA has to one of my very favourites.
I bought this Zerda in very good condition from an old racer mate for a real bargain. It came with the box and a pile of new spares too.
Not happy...
Last post
Would you care to share how you managed to modify a hex hub to fit onto the Zerda's wheel axle? Thanks.
X2
The Zerda is another one I wanted as a kid but never had so I started looking recently for one to restore , I just missed one on eBay that came with a pile of spares but I just missed out , fortunately another popped up so I snapped it up , it was a...
Last post
I remember the Hirobo Zerda from races in the mid 1980s. It was a very cool 4wd and whisper quiet with its belt drive. It will be a great vintage rebuild!