RPM rc10 vs rc10t enhanced steering kit

[mikea96]

Anyone no the difference between the 10t vs rc10 rpm enhanced steering kits?

[scr8p]

Steering knuckles are different. Longer and angled differently.

[mikea96]

Damn! Well that sucks guess the hunt continues unless i can find someone that wants to trade.

[jwscab]

Do you have the buggy or truck ones?

[mikea96]

Truck set

[Lavigna]

I don't have a set to swap but I would be interested in your truck pair if you want to sell.

[mikea96]

I will probably just hold onto it until I find the buggy set.

[orangemazda]

Is this the set you’re looking for?

[scr8p]

He wants the castor blocks and knuckles.

[jwscab]

If you are brave, you could trim the truck arms down to buggy size. That's the only difference. There is a rib on the bottom side you need to reshape also.

[mikea96]

I was thinking of just using stock rc10 steering arms with the rpm castor block.

[scr8p]

I was thinking of just using stock rc10 steering arms with the rpm castor block.

You'll have ridiculous bump steer issues doing that.

[mikea96]

Ok guess I will have to wait for a buggy set to come around again.

[Bholzz]

Is this the set you’re looking for?
0038848E-B27B-4B04-8F1F-44C29E019833.jpeg

I have this in my box but not sure if it’s for rc10/rc10t/rc10t2. Any ideas?

[scr8p]

Is this the set you’re looking for?
0038848E-B27B-4B04-8F1F-44C29E019833.jpeg

I have this in my box but not sure if it’s for rc10/rc10t/rc10t2. Any ideas?

It was made for the rc10 buggy at the time. But with the proper screws it can be used on the T2. In order to use them on a 10t, they would need to be mounted in the short wheelbase position on the nose plate.