Not sure about the 10t but its usually leaky shocks , started with Tamiya rough riders probably , you see a lot of them with inverted shocks .
If a jobs not worth doing then its certainly not worth doing well.
A problem shared is a problem halved but an advantage shared is no advantage at all.
I was searching RC10s for my next build and noticed one with upside down shocks. This was a few weeks ago, and of course I cant find the pic now :roll: . I will keep looking til I find it again.
It would lower the center of gravity. Are there...
Last post
Just a solution for leaky shocks in the old days :mrgreen:
I'm looking for a bit of education, I think I might see the odd rolley eyes for this one :roll: :oops: Anyway how does the numbering work for shocks, is it related to the length, I thought 0.71 = fronts, 1.02 = mid length and 1.32s = rears :? I'm...
Last post
to this day i still get all mixed up on the frigging way ae labeled thier shocks.
I'm pleased I'm not the only one :? Thanks for the info chaps. :D
best srb front shocks!
i was running the stock shocks on the front end / that worked well untill the front springs broke from wear points. i use the car alot with 18650 batteries....
i got the rcchannel front shocks but the springs are not great...
well since i cant sell my rc10 gold pan i guess i will put it back to a stock buggy. were can i find front and rear shocks for my gold pan? Will a b3 or b4 shocks work? i also need front shock tower and body with wing. and front and rear tires. if...
so, i'm hunting around on tower, and i start to look at the b44 front shock kit. i see that they use a .80 shock shaft, and you can buy it seperately from the kit. but, are the shock bodies .89's like the b4? there's no seprate part number for those.
Hey guys, I have a question. I wish I had a picture, but I started taking it apart already. My friend bought a pile of RC10 cars and parts and I am trying to piece together a couple. The car I claimed as mine has a weird steering servo setup. I...
Last post
The geometry is good- better than stock, id put some better looking hardware on it and call it good.
x2 on that. \
I've had a few rc10t's over the years show up with this same kind of setup and thought it odd. Mostly these were all dismantled...
Hi i used a b4.1 rtr for the parts for my rc10 graphite team car.radio.brushless setup.servo.front and rear hubs.wheels front and rear.topshaft and slipper setup.rear wing and mounts for another car.so now before i sell whats left i was wondering...
Last post
I really dont know if it will or wont fit but I'll find out when all my stuff comes in. I was gonna post about what im running it on but i'll post when I start its build thread.