Parts ID - Losi Shock Kit
Parts ID - Losi Shock Kit
This Losi shock kit came with an RC10 parts lot i got off the bay.
Unfortunately, the bag was torn open, and clearly some parts are missing.
No, the missing parts aren't in the bottom of the box.
Can anyone tell me what Losi Kit these are for?
Thanks in advance!
They look a lot like the JRX2 shocks in shodog's post, but i want to be sure.
Unfortunately, the bag was torn open, and clearly some parts are missing.
No, the missing parts aren't in the bottom of the box.
Can anyone tell me what Losi Kit these are for?
Thanks in advance!
They look a lot like the JRX2 shocks in shodog's post, but i want to be sure.
- Brandon G
- Approved Member
- Posts: 2106
- Joined: Mon Oct 01, 2007 4:23 pm
- Location: Nashville, TN
- Been thanked: 2 times
Re: Parts ID - Losi Shock Kit
If I had to guess, I would say junior 2 or junior T. Looks like a .6" body, and a .9" body shock. Original cartridges, so they are from an older car.
-
- Approved Member
- Posts: 1998
- Joined: Fri Feb 16, 2007 10:09 pm
- Location: Upstate NY
- Been thanked: 12 times
Re: Parts ID - Losi Shock Kit
Most likely correct. the junior had the darker grey shock bodies. I will check with my nip junior-T kit to check the shock bag letter. I don't have any other NIP kits, but IIRC, the tags on the x-2 were pink with a jrx-2 logo.bngiles wrote:If I had to guess, I would say junior 2 or junior T. Looks like a .6" body, and a .9" body shock. Original cartridges, so they are from an older car.
The shock collars are the older skinny ones which are harder to find, good bonus score there.
- highwayracer
- Approved Member
- Posts: 1187
- Joined: Wed Dec 12, 2007 9:43 pm
- Location: Illinois, USA
- Been thanked: 3 times
Re: Parts ID - Losi Shock Kit
My guess is that those are from a jrx2 kit. You'll need the following:
1 shock cartridge: A-5006
1 spring collars (old style thin...not thick): A-5010
2 lower shock mounts for 5 link suspension: A-5010 (included with the item above)
1 long shock shaft: A-5005
2 short shock shafts: A-5004
8 e-clips (standard size)
2 4-40 x 3/8 socket head screws (for the shock collars)
hope this helps,
regards,
highwayracer
1 shock cartridge: A-5006
1 spring collars (old style thin...not thick): A-5010
2 lower shock mounts for 5 link suspension: A-5010 (included with the item above)
1 long shock shaft: A-5005
2 short shock shafts: A-5004
8 e-clips (standard size)
2 4-40 x 3/8 socket head screws (for the shock collars)
hope this helps,
regards,
highwayracer
Re: Parts ID - Losi Shock Kit
Thanks to all for the help!
Especially for the part numbers.
Wish me luck finding the parts.
Especially for the part numbers.
Wish me luck finding the parts.
- mrlexan
- Approved Member
- Posts: 6251
- Joined: Wed Dec 06, 2006 6:49 pm
- Location: Upstate SC
- Been thanked: 10 times
Re: Parts ID - Losi Shock Kit
Looks like the lower spring retainers might be early ones as well. I have noticed that the later ones have three tooling marks in the bottom surface that are 120 degrees from one another (form a triangle). The older ones are smooth and have a glossier finidh to them. If you would like to trade those earlier lower and upper spring retainers and for a set of wide later ones, just let me know. I could also throw in all the parts you need to make a complete set.
I am not here cause I am playing photographer and on my mountain bike.
www.gojammedia.com
www.gojammedia.com
-
- Approved Member
- Posts: 1998
- Joined: Fri Feb 16, 2007 10:09 pm
- Location: Upstate NY
- Been thanked: 12 times
Re: Parts ID - Losi Shock Kit
the newer ones have the 3 marks on the outside flat surface, the older ones have the marks on the inside of the cup.MikeyD wrote:Looks like these have the marks.
See the comparison here:
http://www.rc10talk.com/viewtopic.php?f=5&t=3171
- mrlexan
- Approved Member
- Posts: 6251
- Joined: Wed Dec 06, 2006 6:49 pm
- Location: Upstate SC
- Been thanked: 10 times
Re: Parts ID - Losi Shock Kit
What Anthony said. Interested in the trade?
I am not here cause I am playing photographer and on my mountain bike.
www.gojammedia.com
www.gojammedia.com
Re: Parts ID - Losi Shock Kit
Aaahh, I see now.
Jay, you ARE aware that I don't have the complete set?
But yes, I'm interested. PM coming your way.
Jay, you ARE aware that I don't have the complete set?
But yes, I'm interested. PM coming your way.
Create an account or sign in to join the discussion
You need to be a member in order to post a reply
Create an account
Not a member? register to join our community
Members can start their own topics & subscribe to topics
It’s free and only takes a minute
Sign in
-
- Similar Topics
- Replies
- Views
- Last post
-
- 2 Replies
- 605 Views
-
Last post by Barnfind
-
- 1 Replies
- 648 Views
-
Last post by daniels9424cs
-
- 1 Replies
- 390 Views
-
Last post by jwscab
-
- 0 Replies
- 302 Views
-
Last post by CNA75
-
- 6 Replies
- 2325 Views
-
Last post by LemonC
-
- 4 Replies
- 927 Views
-
Last post by mrhemi1971
-
- 10 Replies
- 966 Views
-
Last post by Bongo Fury
-
- 1 Replies
- 372 Views
-
Last post by Charlie don't surf
Who is online
Users browsing this forum: No registered users and 11 guests