Sharkman wrote:Thanks fellas,and yes Toy maker the tires on the front ,are cut down rears.Once I get the paint finished, I'll get some pics posted.
Those split proline waffles in the front were pioneered at RC Competion corner in N Syracuse NY, then made
by LHS's to use on the very dry winter indoor tracks. That car is exactly what we ran in the
late 90's..............but we used to cut the rear tower in half and run AE front shocks in the
rear too for lower roll center-----then the Kranzels Terminators came around our way and that
was the end of the graphite team cars-------
started with a jrx2 based edm, ended with wedge bodied cobbed together rc10/houge kit w/jg lowering kit.
we also had a bbt or ascot sprinter. i gotta get pics up of that so you guys can tell me what...
Any suggestions then, I have already ordered a McAllister #237 Bakersfield Late Model body 10” wide because this is what was suggested for a buggy conversion, I plan on running SC10 front hex conversion axles and spindles so the wide gt spindles are...
Just wanted to share a few pics of this modified dirt oval modified before I stripped it for resale. I'm not sure about the chassis. Maybe an old sportworks. The whole front end is RC-10. Also has a Stealth transmission with Liesink motor plate and...
That poor Equalizer. :(
I searched for years to find on in good shape until Phin found me one. I just don't understand why some people did those mods back then. :?:
Been awhile since I have posted anything new. Have barely found the time to visit the board let alone build anything. Got some free time over the weekend and wrapped up a couple stalled projects.
This one is a BME oval chassis with some random...
very nice. i have a bme build going on now too. not sure which way i want to go, dirt oval or asphalt oval with a sk body.
i like your chassis bracing. i'm using a&l's at them moment but yours looks sharp!
I have been trying to use the search on this site, don't know if it's this crap Iraq internet. Some sites are not too accessible. If there is a thread for this somewhere, gladly refer me and delete this thread.
On with it, I'm just wondering if...
Thanks Doug, I'm a member over there. I made this post after looking through the gallery at DO.com. However not a lot of vintage rides over there in the gallery. I seen the incredible detail people on this site put into their rides. So what I was...
Im sure the dementions will depend on this or that. The only thing I know is we will mostly be running 1/8 and 1/10 whatever . Maybe just tell me about the largest and smallest youve been to and which you like for running what. Heck, whatever you...