After reading up on the Mirage and Mirage II bodies i started getting excited because i remembered my LHS having some old RC10 body in a bag on the far corner of the shelf.
Checked it out yesterday and it's a Deja Vu body.... part #6151 i think. It was definitely in an old AE bag, the printing of the name and part number reminded me of some old school ink, not like the newer laser printing. Did some research here and can only find some info on a Pro-line Deja Vu body for the newer B2/3/4 i believe.
Can anyone shed some more light on this body? Should i snatch it up for a project or just order the 6160 for a car i'm putting together for my brother?
pejota wrote:After reading up on the Mirage and Mirage II bodies i started getting excited because i remembered my LHS having some old RC10 body in a bag on the far corner of the shelf.
Checked it out yesterday and it's a Deja Vu body.... part #6151 i think. It was definitely in an old AE bag, the printing of the name and part number reminded me of some old school ink, not like the newer laser printing. Did some research here and can only find some info on a Pro-line Deja Vu body for the newer B2/3/4 i believe.
Can anyone shed some more light on this body? Should i snatch it up for a project or just order the 6160 for a car i'm putting together for my brother?
I am having a serious case of deja vu and hoping someone might be able to help. Today after browsing through the Bay, I came across a listing with a car that just…I don’t know…I swear I have seen it somewhere before?
I thought perhaps it was from...
Last post
That’s awesome Lavigna!
RCCA must have really liked that body..they also put that painting article in the 1992 “R/C Car Painting & Finishing Techniques” special issue.
So I want to change the battery placement on my gold pan from being across the body to run with the body. Now i can make that happen with out issue but the futuba esc i have that mounts the same as the steering servo has no place to go that can...
Last post
i see it now, its the hole along the bottom edge that isnt at one of the corners on the plate.
My Jrx2 build is coming on, but always seem to be searching for parts! The original short chassis is proving to be a big challenge but I will have to be patient. In the meantime please can you help me with a few question...
- are there any...
Last post
Thanks guys, really helpful as normal. Will have to spend some time taking in all the collects on the different wheel options.
Hi,
what can i use for replace the DS Universals ?
Thanks
Last post
DS is kinda unique there. You could use standard axles and DS bones. You may also be able to source some CVD type axles, but it would have to be a mix and match gamble kind of thing. maybe a TC3 or NTC3 something might be a usable source. I think...
Been working on a B2 I picked up just have a few questions.
Did all the B2's have the skinny rear chassis plate or did late versions come with the extended 9241 plates? I have a Late B2 but it has the 9241 rear chassis plate with the updated 9267...
Last post
maybe your car had the b3 conversion installed. or, worn out parts were just replaced.
i don't know off hand what all came in those conversion kits.
Here's a pic of a sealed B2-to-B3 conversion currently on ebay if it helps:
Hey guys.I got myself a T4 from a good buddy and know very little about it.It`s a roller in new condition and would like to know the diff between a T4 and a B4.Is there any reason I couldnt put F&R shock mounts off a B4 on this thing and run a B4...
Last post
Thanks alot for the input guys.I think I`ll leave it as is.I have never owned one and dont know diddley about them. We have a bunch of xxt`s we beat on regularly so I am considering making a shelfer out of this one.Its got cv joint type drive...
I got a set of rims like what Jay Halsey used on his 1985 IFMAR winning buggy. What bearings or bearing inserts did he use? Does anyone have a link to where I can get what I will need?
Also, does anyone have a lead on the right tires for...