RC10Talk - The Net's Largest Vintage R/C Community

these are not dynotech arms, however, you can purchase dynotech arms and use them as I am doing here. These arms were a limited run by Jake, aka Seabass on this forum. They are essentially the dynotech arms, with a bit of added offset so you don't need to run a wider axle to run a B4 front wheel. as...

It's been way long since any update on this one. So here goes.
Have had the time to source some electronics and as I solder the cells for the Insane Speed Car I figured I might as well do the saddle packs for the B44 as well.

Yokomo bone was introduced below topic. http://www.rc10talk.com/viewtopic.php?f=35&t=34582&start=45 I simply used Associated CVD coupler (#7381). Yokomo has discontinued B-MAX2 bone. The new one is Z2-010RB2 (for YZ-2CA) and length is 62mm. I just received this bone from Yokomo as a substitu...

Alright, the brace is done. It's wider than the stock T2 motor guard, but I tried to mimic the shape. and added a few slots too.

Composite Craft -10Lss.

https://www.rc10talk.com/viewtopic.php?f=37&t=42238

20180517_200517.jpg With some shocks mounted up on servo mounts and the motor plate and 17.5 HobbyWing it'll be utilizing. Start it out with a 78S/30P with the factory 2.14:1 final drive...yields a 1.21:1. Is that math right? Driven ÷ Drive, etc. Yeah? So that's 1.21 motor spins for 1 wheel spin. T...

10T Team Rebuilt

New Built #7011

Ok, another update that took a while to get done. Probably the last big content update for a long time. Not much more to add at this point unless I squeeze in XXX models and I don't think I will. I had posted all the pictures from meeting up with Gil Jr in the History section earlier this year. I al...

Yeah, this car is always up to some crazy shenanigans... :lol: . 7E5C0CB1-ECBC-40EC-AF1E-A3BA99ED8349.jpeg No, we were saying that the car must've had serious downforce if it was staying planted while running on the ceiling. :mrgreen: Or maybe you should change your topic title to WUSD...What's UpSi...

Ok finished the front end minus the bumper I need to cut out. This is an amazing car and has been so much fun assembling. Just waiting for final design of the steering bell cranks to be finished then I can tear down and dye the parts.

Finally going to start my LXT build. Mostly new parts including aftermarket parts. Just waiting for a couple items to get here and I can start. I had a nice used chassis to use then found this new one but it wasn't cheap.

my lord that is sexy.............................

I was going through my box of random parts last night looking for things to sell on e-Bay and was left speechless when I realized that all this time I had a used (and slightly battered), BSW-50 front carbon shock tower for the Turbo Burns Special Champion Car. As we had been writing about this car r...

Its been a long time since I did something on this one. I've been on the hunt for the five blade fan for quite a while now and I finally found a good one thanks to Asso_man. It had a rough decal so I had to buy a newer fan just for the sticker. oh and I also got the correct on / off switch for the E...