RC10Talk - The Net's Largest Vintage R/C Community

Received chassis today. Really impressive, comes screwed together includes nuts and bolts for the bumper and what you can't see in the pictures are the three 60mm HR spacers which bolt the chassis together and two small spacers neatly tie wrapped to chassis for the gap on the rear chassis mount. Exc...

That is interesting!
Regarding the Associated car.
As the known ESC´s from -85 all have the leads out the side of the case and this out the back..
What about the ESC on the Delta/Bolink?
It has the trimpot's on diagonal over the casing and some what thin leads.

A lot of you probably already know this but for those who don't Nylon has a water content that dries out over time , when it dries it becomes more brittle and hard that originally intended . Now many of the cars we collect and restore used a lot of Nylon parts , gears , suspension arms etc were all ...

Easy one, it's an Acme Cyclone. It comes with an SH or Infinity .18 engine. It looks like a standard Cyclone upgraded with the two speed, the Cyclone Pro would also have alloy shocks. This looks an old one but with minor updates the car is still sold today, I see plenty of these as I work for the UK...

Yes, #1180. Contact GoMachV here on the forum, he'll take good care of you.

Thank you GoMachV. I did this with a mini 18" bending brake from harbor freight.

GoMachV wrote: ↑Tue Feb 19, 2019 1:15 am I’ll have to do some searching... there is a pic somewhere lol!

It doesn't easily fit with the RPM front upper brace as the rpm part is bulkier around the attachment points making it harder to flex the battery holder, but it does fit.

Yeah I just realized it was upside down.

Oh sorry, I thought you said stripper's socks. I was going to suggest that you just hide under a stall in the dressing room and wait for them to all go home. That's how I get their underwear. My bad.

Well I am very happy to report that 'aircooled' very kindly agreed to let his set of three-hole alloys go, and they are now in the post on the way to me as I type. To say I am chuffed about finding these is a bit of an understatement. 61554493_334933590523607_1203992148974764032_n - Copy.jpg 6143772...

the original Bantams were developed by Dick Rehling and Bob Novak. It’s common to see them with the D&R label. This was early 70’s, not sure what year the Bantam Midget arrived. Ace was a catch all for a lot of different companies that went out or sold out. That article is a cool read. I just f...

Nice design work. Thumbs up!

IT STARTS!!!

Austin FactoryWorks has been my go-to for carbon fiber for a while now. A very knowledgeable business member and moderator here on RC10 talk. PM GoMachV for available parts and cost, that's what I do. Or check out his Ebay listings. https://www.rc10talk.com/memberlist.php?mode=viewprofile&u=7863...

This chassis is not in any way "Quadra specific". It will work with any arms that suits 10T nose setup. Chassis lower deck number is NIX63057 and upper deck is NIX63058. I will send the drawings to GoMachV. 4pcs 1" standoffs and one upper deck front end mounting part needed to complet...